Posted: Wed Aug 22, 2018 22:50 Post subject: Upgrade
All WebGUI upgrades.
Router/Version: TP-Link Archer C7 v2
Firmware: 36698
Previous: 36645
Mode/Status: WDS AP, WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: TP-Link WDR3600 v1
Firmware: 36698
Previous: 36645
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: TP-Link TL-WR841ND v8
Firmware: 36698
Previous: 36645
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: D-Link DIR-825 B1
Firmware: 36698
Previous: 36645
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: D-Link DIR-862L A1
Firmware: 36698
Previous: 36645
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: Linksys WRT400N
Firmware: 36698
Previous: 36645
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
EA8500
DD-WRT v3.0-r36698 std (08/22/18
Linux 4.9.123-rc1 #139 SMP PREEMPT Wed Aug 22 02:58:04 CEST 2018
GUI install over r36645
unbound
VLAN
Guest on 2.4 & 5Ghz
USB Ext4 samba share
ovpn server
All good ... but NO NAT loopback on local FTP and thru ovpn server NO local DNS if running unbound.
-----
WNDR3700v4
DD-WRT v3.0-r36698 std (08/22/18
Linux 3.18.119 #20802 Wed Aug 22 06:32:24 CEST 2018 mips
GUI install over r36645
WAP
USB FAT32 samba share
ovpn server
All good
-----
WRT160NL
DD-WRT v3.0-r36698 std (08/22/18
Linux 3.10.108-d5 #62566 Wed Aug 22 04:38:03 CEST 2018 mips
WAP
USB FAT32 samba share
ovpn server
All good
GUI install over r36645 .....
... for this unit need to give it approx. 5 minutes after you click
the upgrade button --- then power cycle router. Will come up with r36698
Still the same issues I had from last build but otherwise ok.
* SFTP still doesn't work on ssh server
* bunch of httpd spam in log "Request Error Code 408: No request appeared within a reasonable time period."
everything under here is fine
----
wds ap and gateway
IPv6 tunnel
openvpn+ipv6 in tunnel
ddns
nas
qos
bunch of opt packages
Posted: Thu Aug 23, 2018 9:56 Post subject: Router Linksys WRT160NL
As I wrote earlier on the impossibility of upgrading from v3.0-r36330 to v3.0-r36527 at Router Linksys WRT160NL, it is currently totally impossible to upgrade from v3.0-r36330 to v3.0-r36698. Uploads the file, and after restarting the router again remains on version v3.0-r36330
Posted: Thu Aug 23, 2018 10:19 Post subject: Re: Router Linksys WRT160NL
borislav.mikov wrote:
As I wrote earlier on the impossibility of upgrading from v3.0-r36330 to v3.0-r36527 at Router Linksys WRT160NL, it is currently totally impossible to upgrade from v3.0-r36330 to v3.0-r36698. Uploads the file, and after restarting the router again remains on version v3.0-r36330
The fix for this was in r36645 but you have to TFTP it on there or just TFTP r36698. After you have one of those builds installed you can then upgrade/downgrade to whatever firmware you want useing the GUI.
Posted: Thu Aug 23, 2018 13:12 Post subject: Re: Router Linksys WRT160NL
mrjcd wrote:
borislav.mikov wrote:
As I wrote earlier on the impossibility of upgrading from v3.0-r36330 to v3.0-r36527 at Router Linksys WRT160NL, it is currently totally impossible to upgrade from v3.0-r36330 to v3.0-r36698. Uploads the file, and after restarting the router again remains on version v3.0-r36330
The fix for this was in r36645 but you have to TFTP it on there or just TFTP r36698. After you have one of those builds installed you can then upgrade/downgrade to whatever firmware you want useing the GUI.
Posted: Thu Aug 23, 2018 13:15 Post subject: Re: Router Linksys WRT160NL
borislav.mikov wrote:
mrjcd wrote:
borislav.mikov wrote:
As I wrote earlier on the impossibility of upgrading from v3.0-r36330 to v3.0-r36527 at Router Linksys WRT160NL, it is currently totally impossible to upgrade from v3.0-r36330 to v3.0-r36698. Uploads the file, and after restarting the router again remains on version v3.0-r36330
The fix for this was in r36645 but you have to TFTP it on there or just TFTP r36698. After you have one of those builds installed you can then upgrade/downgrade to whatever firmware you want useing the GUI.
Router/Version: D-Link DIR-300 A1
Firmware: 36698
Mode/Status: AP
Reset: YES
Issues/Errors:
- Wireless Security Settings Are NOT Applied (The WiFi connection keeps open - no password required).
Joined: 16 Nov 2015 Posts: 6388 Location: UK, London, just across the river..
Posted: Fri Aug 24, 2018 13:20 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r36698 std (08/22/1
Kernel Version Linux 3.18.119 #20780 Wed Aug 22 05:50:46 CEST 2018 mips
update: 36410 > 36698
reset: NO
status: Operational
errors: look at tatsuya46's post above, please... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55363 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55363 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 21 Jan 2017 Posts: 1782 Location: Illinois Moderator
Posted: Fri Aug 24, 2018 16:01 Post subject:
Router ModelNetgear Nighthawk X10
Firmware Version DD-WRT v3.0-r36698 std [08/22/18]
Kernel VersionLinux 4.9.123-rc1 #210 SMP PREEMPT Wed Aug 22 02:39:31 CEST 2018
No Reset
Forced to upgrade through Chrome Incognito mode only.
Otherwise sticks at 0% using normal chrome gui update. SVN 6414.
Also, LAN QOS still is crap- bad bufferbloat numbers despite a lot of tweaks to make sure it's ok. Checked this against multiple devices and all have craptastic bufferbloat scores for Rx on LAN, TX LAN is a beaut. I even purchased a new NIC to offload from Mobo NIC and still same results.
Otherwise seems ok to me, but I don't do anything outside simple QOS and a few port forwards. Not doing any DNS stuff; probably should be...still teaching myself on this.