New (BS) Build - 08/14/2018 - r36596

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4, 5  Next
Author Message
Bernadoe
DD-WRT User


Joined: 03 Dec 2014
Posts: 215

PostPosted: Tue Aug 14, 2018 15:47    Post subject: New (BS) Build - 08/14/2018 - r36596 Reply with quote
ftp://ftp.dd-wrt.com/betas/2018/08-14-2018-r36596/

Please report errors on this topic.

Release Notes:
http://svn.dd-wrt.com/timeline

Router Model:
Status:
Reset:
Errors:

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29000_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.
Sponsor
Bernadoe
DD-WRT User


Joined: 03 Dec 2014
Posts: 215

PostPosted: Tue Aug 14, 2018 15:51    Post subject: Reply with quote
Router: Netgear R7000
Firmware: DD-WRT v3.0-r36596 std (08/14/2018)
Kernel: Linux 4.4.147 #3670 SMP Mon Aug 13 16:34:44 CEST 2018 armv7l
Status: Working
Reset: No
Previous: 36440M
Errors: No

CPU Temperature : CPU 55.8 °C / WL0 48.3 °C / WL1 50.4 °C

Working very well :
Router mode : DHCP
SFE Enable
STP Enable
DNSMasq
Encrypt DNS
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Local DNS
No DNS Rebind
Query DNS in Strict Order
Usb
Nas, Samba, JFFS2, MiniDLNA
wl0, wl1
Vpn (OpenVPN Client)

Kong and BS: Thanks for all your good work!

without VPN



with VPN
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 311
Location: Bakersfield, CA

PostPosted: Tue Aug 14, 2018 17:37    Post subject: Reply with quote
Router: 2x Linksys E3000
Firmware: dd-wrt.v24-36596_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-36410_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.108-d5 #20484 Tue Aug 14 13:50:51 CEST 2018 mips
Status: Working as client bridges
Reset: No
Errors: None thus far

These E3000 units are running as client bridges, so pretty much everything is turned off that doesn't have to be on for a client bridge. But the speedtests actually are a tad bit faster than the previous build, pretty good. So far so good, will report back if anything pops up. Smile




_________________

Deployed Routers:
Netgear R7000 - 5x build 44538M
- Gateway: DoT/DoH, CAKE QoS, USB /w Entware
- Second Subnet Gateway: CAKE QoS, USB /w Entware
- Client Bridge x3: USB /w Entware

Spares/Backups/Collection:
Too many to list. I have old routers, bricked routers, weird routers. You name it.


Last edited by SinCalChewy on Tue Aug 14, 2018 18:10; edited 2 times in total
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7273
Location: Texas, USA

PostPosted: Tue Aug 14, 2018 17:48    Post subject: Linksys E4200 v1 Reply with quote
Router/Version:  Linksys E4200 v1
Firmware:  DD-WRT v3.0-r36596 mega ( 08/14/18 )
Kernel:  Linux 3.10.108-d5 #20484 Tue Aug 14 13:50:51 CEST 2018 mips
Previous: DD-WRT v3.0-r36527 mega ( 08/09/18 )
Firmware file used: dd-wrt.v24-36596_NEWD-2_K3.x_mega-e4200.bin
Reset; Yes; Reset via webUI (reboot), Firmware upgrade (httpd crash!) x2 (didn’t wait long enough to power cycle), (wait, power-cycled x2), configured previous settings manually (reboot)
Mode: Gateway/AP
Uptime: ~45 minutes
Status: OK
Issues/Errors: Still shaking the dust off from the ride. Is anyone ELSE having issues with httpd crashing during firmware upgrade? The countdown / upgrading page froze this time, even. Since previous brick, I've been running serial console, especially during firmware upgrades, and that has been the only way I've known to wait and power cycle these last few builds, thankfully. This time, I didn't wait long enough, and httpd somehow seemed to think it should still be running the upgrade process when it came back up and also crashed a second time somewhere in there. Gratuitous serial console and syslogs attached.

On the PLUS side, lsmod now works properly!

EDIT: Did a quick local speedtest with media streaming, even. I still think my ISP has bandwidth throttled, but considering WAN connects to ISP router via AC line adapters, there's also that Wink

EDIT#2: Got curious and checked DSLReports and Ookla:






speed_test_r36596.png
 Description:
 Filesize:  35.23 KB
 Viewed:  4166 Time(s)

speed_test_r36596.png



syslog_r36596.txt
 Description:

Download
 Filename:  syslog_r36596.txt
 Filesize:  24.28 KB
 Downloaded:  327 Time(s)


serial_r36596.txt
 Description:

Download
 Filename:  serial_r36596.txt
 Filesize:  116.85 KB
 Downloaded:  331 Time(s)



Last edited by kernel-panic69 on Wed Aug 15, 2018 9:01; edited 1 time in total
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 311
Location: Bakersfield, CA

PostPosted: Tue Aug 14, 2018 18:39    Post subject: Reply with quote
Router: Trendnet TEW811DRU
Firmware: DD-WRT v3.0-r36596 mini ( 08/14/18 )
Previous: DD-WRT v3.0-r36410 mini ( 07/28/18 )
Kernel: Linux 4.4.147 #3673 Tue Aug 14 08:24:06 CEST 2018 armv7l
Status: Working as a AC-only client bridge
Reset: No
Errors: None thus far

This router is running as an AC-only client bridge for my server network. It's loading my web pages fast and game servers are doing good, no lag. Seems like a pretty solid build.

_________________

Deployed Routers:
Netgear R7000 - 5x build 44538M
- Gateway: DoT/DoH, CAKE QoS, USB /w Entware
- Second Subnet Gateway: CAKE QoS, USB /w Entware
- Client Bridge x3: USB /w Entware

Spares/Backups/Collection:
Too many to list. I have old routers, bricked routers, weird routers. You name it.
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 572

PostPosted: Tue Aug 14, 2018 20:26    Post subject: Reply with quote
SinCalChewy wrote:
Router: 2x Linksys E3000
Firmware: dd-wrt.v24-36596_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-36410_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.108-d5 #20484 Tue Aug 14 13:50:51 CEST 2018 mips
Status: Working as client bridges
Reset: No
Errors: None thus far

These E3000 units are running as client bridges, so pretty much everything is turned off that doesn't have to be on for a client bridge. But the speedtests actually are a tad bit faster than the previous build, pretty good. So far so good, will report back if anything pops up. Smile





The speed tests are done on the wired ports? I have been trying E3000 5Ghz client bridge + 2.4Ghz AP on the latest builds but internet keeps disconnecting. Do you have an AP configured?
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2599
Location: Indy

PostPosted: Tue Aug 14, 2018 22:17    Post subject: Reply with quote
Just to be sure, I tested 36596 micro_generic on the WRT54GSv6, and it still bricks. TFTP back to 36242, after reset, works fine.
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 20.7.3|FT2020.6: EA6900v1.1@1GHz, F7D8302@532|DD 44528: DIR-810L, WNDR4500v2 & 4000@533,
R6300v1, RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT 19.7.3: RT-ACRH13, R6220, WNDR3700v4
mache
DD-WRT User


Joined: 11 Apr 2010
Posts: 268
Location: San Francisco Bay Area

PostPosted: Tue Aug 14, 2018 22:30    Post subject: Reply with quote
Anyone check to see of VAPs are working?
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 311
Location: Bakersfield, CA

PostPosted: Tue Aug 14, 2018 22:41    Post subject: Reply with quote
mache wrote:
Anyone check to see of VAPs are working?


I tried making a repeater, and it displayed the VAP name, but even with the right password, I couldn't connect. Even with no password I couldn't connect. 31899 is the latest I found that you can use to make a repeater and connect to the VAP to use it.

My 2 cents. Smile

Router: Linksys E900
Firmware: dd-wrt.v24-36596_NEWD-2_K3.x_mega-e900.bin
Previous: dd-wrt.v24-36410_NEWD-2_K3.x_mega-e900.bin
Kernel: Linux 3.10.108-d5 #20484 Tue Aug 14 13:50:51 CEST 2018 mips
Status: Working as a client bridge
Reset: No
Errors: None thus far

nolimitz wrote:
SinCalChewy wrote:
Router: 2x Linksys E3000
Firmware: dd-wrt.v24-36596_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-36410_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.108-d5 #20484 Tue Aug 14 13:50:51 CEST 2018 mips
Status: Working as client bridges
Reset: No
Errors: None thus far

These E3000 units are running as client bridges, so pretty much everything is turned off that doesn't have to be on for a client bridge. But the speedtests actually are a tad bit faster than the previous build, pretty good. So far so good, will report back if anything pops up. Smile





The speed tests are done on the wired ports? I have been trying E3000 5Ghz client bridge + 2.4Ghz AP on the latest builds but internet keeps disconnecting. Do you have an AP configured?


All my computers have client bridges that connect to the main gateway (or server AP), so it's not really "wired", and it's not "wireless adapter", I've not had any issues with internet dropping on any of my routers though, ever.

_________________

Deployed Routers:
Netgear R7000 - 5x build 44538M
- Gateway: DoT/DoH, CAKE QoS, USB /w Entware
- Second Subnet Gateway: CAKE QoS, USB /w Entware
- Client Bridge x3: USB /w Entware

Spares/Backups/Collection:
Too many to list. I have old routers, bricked routers, weird routers. You name it.
nodnarb91
DD-WRT Novice


Joined: 14 Aug 2018
Posts: 1

PostPosted: Wed Aug 15, 2018 0:07    Post subject: Reply with quote
What vpn is that? Quite the decrease in speed. Anonymity/encryption over speed.

[quote="Bernadoe"]Router: Netgear R7000
Firmware: DD-WRT v3.0-r36596 std (08/14/2018)
Kernel: Linux 4.4.147 #3670 SMP Mon Aug 13 16:34:44 CEST 2018 armv7l
Status: Working
Reset: No
Previous: 36440M
Errors: No

CPU Temperature : CPU 55.8 °C / WL0 48.3 °C / WL1 50.4 °C

Working very well :
Router mode : DHCP
SFE Enable
STP Enable
DNSMasq
Encrypt DNS
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Local DNS
No DNS Rebind
Query DNS in Strict Order
Usb
Nas, Samba, JFFS2, MiniDLNA
wl0, wl1
Vpn (OpenVPN Client)

Kong and BS: Thanks for all your good work!
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5342
Location: Texas

PostPosted: Wed Aug 15, 2018 0:12    Post subject: Reply with quote
mache wrote:
Anyone check to see of VAPs are working?


VAP working on E1200v2 with a k3.x build. (regular gateway mode)
See ---> https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1137906#1137906
nobelium
DD-WRT Novice


Joined: 04 Sep 2007
Posts: 28

PostPosted: Wed Aug 15, 2018 0:23    Post subject: Re: Linksys E4200 v1 Reply with quote
kernel-panic69 wrote:
Router/Version:  Linksys E4200 v1
Firmware:  DD-WRT v3.0-r36596 mega ( 08/14/18 )
Kernel:  Linux 3.10.108-d5 #20484 Tue Aug 14 13:50:51 CEST 2018 mips
Previous: DD-WRT v3.0-r36527 mega ( 08/09/18 )
Firmware file used: dd-wrt.v24-36596_NEWD-2_K3.x_mega-e4200.bin
Reset; Yes; Reset via webUI (reboot), Firmware upgrade (httpd crash!) x2 (didn’t wait long enough to power cycle), (wait, power-cycled x2), configured previous settings manually (reboot)
Mode: Gateway/AP
Uptime: ~45 minutes
Status: OK
Issues/Errors: Still shaking the dust off from the ride. Is anyone ELSE having issues with httpd crashing during firmware upgrade? The countdown / upgrading page froze this time, even. Since previous brick, I've been running serial console, especially during firmware upgrades, and that has been the only way I've known to wait and power cycle these last few builds, thankfully. This time, I didn't wait long enough, and httpd somehow seemed to think it should still be running the upgrade process when it came back up and also crashed a second time somewhere in there. Gratuitous serial console and syslogs attached.

On the PLUS side, lsmod now works properly!

EDIT: Did a quick local speedtest with media streaming, even. I still think my ISP has bandwidth throttled, but considering WAN connects to ISP router via AC line adapters, there's also that Wink


@kernel-panic69 How is the wifi performance? Any issues with OpenVPN?

Running v3.0-r28211 mega but I think it's time to upgrade Smile
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7273
Location: Texas, USA

PostPosted: Wed Aug 15, 2018 6:17    Post subject: Re: Linksys E4200 v1 Reply with quote
nobelium wrote:


@kernel-panic69 How is the wifi performance? Any issues with OpenVPN?

Running v3.0-r28211 mega but I think it's time to upgrade Smile


Wi-fi stability seems better, but I have NOT checked GTK re-key interval default setting-related disconnects, continuing to use the workaround and setting the interval to 0.

I don't use OpenVPN. I'm sure I'll get flack about _not_ using it, but I have my reasons Wink Rolling Eyes


Last edited by kernel-panic69 on Wed Aug 15, 2018 6:19; edited 1 time in total
@m0eb@
DD-WRT User


Joined: 26 Dec 2015
Posts: 283

PostPosted: Wed Aug 15, 2018 6:17    Post subject: Netgear R6400 v2 Reply with quote
Thanks !!

Anyone tried this on Netgear R6400 v2 (board U12H332T20)

The last update bricked my router and I am shy of being the first one to do it ... the new one is currently running on netgear firmware with all its limitations !!
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7273
Location: Texas, USA

PostPosted: Wed Aug 15, 2018 6:24    Post subject: Re: Netgear R6400 v2 Reply with quote
@m0eb@ wrote:
Thanks !!

Anyone tried this on Netgear R6400 v2 (board U12H332T20)

The last update bricked my router and I am shy of being the first one to do it ... the new one is currently running on netgear firmware with all its limitations !!


I'll be the heckler here. "Don't be skurred!". After I bricked my E4200 v1 several builds ago and have been running with serial console, and I kinda laugh at it now. All part of the fun... "Flash it 'til it bricks!" Shocked
Goto page 1, 2, 3, 4, 5  Next Display posts from previous:    Page 1 of 5
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum