[dashawn]

My router is a Linksys E1200 V2 and it's running DD-WRT v3.0-r36527 mini 08/09/18. I've been following the directions on this page: https://wiki.dd-wrt.com/wiki/index.php/Jffs#Directions_for_.28normal.29_users:_using_Web-GUI_Interface

I have also tried the directions for linux gurus. JFFS continues to have a status of (not mounted). This router should have 8MB of flash storage, why can't I access it?

Thanks for any help you can offer

[dashawn]

The build is v3.0-r36527 mini. It’s mini so I figure there should be space left over for jffs. I was running a mega build before flashing this one, though. Could that have something to do with it?[/b]

[mrjcd]

If you use r36104 it will mount JFFS2 ... works on E1200v2 with this build.
Builds r36410 & r36527 JFFS2 WILL NOT mount..... also with r36527 you cannot change wireless channel if 'Wireless Network Mode' is on defaults 'Mixed' --- you must set to different mode then change channel.

You can install r36104 mount JFFS2 then reinstall r36527 iffin you wanted to do such a thing and JFFS2 is still there.....See --

[dashawn]

Thanks homies! I’ll have to try flashing that build later.

[mrjcd]

FYI ---
The new r36596 mini for E1200v2 has exactly same problem as decribed.... also a VAP will not broadcast.
With the k3.x [dd-wrt.v24-36596_NEWD-2_K3.x_mega-nv64k.bin] a VAP works fine.