Router: DIR-615e3
Firmware: dir615e3-firmware.bin (v3.0-r36410 std)
Kernel: Linux 3.10.108-d4 #60646 Sat Jul 28 03:28:46 CEST 2018 mips
Status: Buggy on gui
Reset: No
Notes on configuration:
DNSMasq
Virtual wireless with bridging x2
multiple DHCP server
QOS
Errors:
1. Apply settings on multiple pages does not work (for example Setup->Basic Setup, Setup->Network and Security->Firewall)
2. Firmware upgrade button does not work (I have had to use command line to upgrade/downgrade)
3. Factory Defaults (reset) does not work (apparently broken after 33006)
4. Firmware restore button broken (apparently broken after 33006)
5. Switch ports can not communicate with each other (see post https://www.dd-wrt.com/phpBB2/viewtopic.php?t=312371 ) [have not tested due to wanting isolation]
6. user.info : Authentication fail after each http login
daemon.err httpd[1396]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
7. httpd[1166]: Request Error Code 404: File favicon.ico not found
Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r36410 std)
Kernel: Linux 3.10.108-d4 #60628 Sat Jul 28 02:56:02 CEST 2018 mips
Status: Working
Reset: No
Notes on configuration:
Media Network
DNSMasq
Port Forwarding
DHCP reservation
Errors:
1. user.info : Authentication fail after each http login
daemon.err httpd[1396]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
2. httpd[1166]: Request Error Code 404: File favicon.ico not found
Previous build ran for uptime of 44 days: 2018_06_10_build_36104
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Tue Jul 31, 2018 1:12 Post subject:
bdg2 wrote:
mrjcd wrote:
tatsuya46 wrote:
its right in syslog servers, its wrong on ddwrt syslog gui page, except on kong builds cause.. he fixes things.
Yea, it'll show correct local time with Kong builds.... he da man!
Are BS and Kong not talking to each other?
they do, or did.. dont know if current. but from what i saw from it, bs sees kong like he sees us, a user, seems to not care or believe what kong has to say or commit, as he usually reverts or reworks it to his liking (which usually doesnt fix the problem).. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
NOTE:
If your WRT160NL or E2100L has --
Oops: flash id 0xc22017 this build along with many others will not install ---
---just wind up with flashy power light and you will have to TFTP a good firmware to it.
I have two E2100L and three WRT160NL units but only the one 160NL has Oops: flash id 0x1c2017
Any wiseguys try looking for Oops: flash ID you prolly aint gonna get anything.
I've only seen it on the two routers mentioned.
I had a ticket opened about it once but guess BS never got around to looking into it.
I used to have the same problems with my WRT160NL and I have give up updating long ago. My ticket was never solved (#5959). So, I am still using the version 33555 which seem rock solid. Up time 85 days.
NOTE:
If your WRT160NL or E2100L has --
Oops: flash id 0xc22017 this build along with many others will not install ---
---just wind up with flashy power light and you will have to TFTP a good firmware to it.
I have two E2100L and three WRT160NL units but only the one 160NL has Oops: flash id 0x1c2017
Any wiseguys try looking for Oops: flash ID you prolly aint gonna get anything.
I've only seen it on the two routers mentioned.
I had a ticket opened about it once but guess BS never got around to looking into it.
I used to have the same problems with my WRT160NL and I have give up updating long ago. My ticket was never solved (#5959). So, I am still using the version 33555 which seem rock solid. Up time 85 days.
I've been messing with these routers for years and I still use r27506 on E2100L routers for long distance WDS that ties two LANs together.....
...only build that is WDS wireless stable with them
Modello Router Netgear R7000
Versione Firmware DD-WRT v3.0-r36410 std ( 07/28/18 )
Versione Kernel Linux 4.4.144 #3591 SMP Thu Jul 26 13:46:00 CEST 2018 armv7l
Status: Ok
Reset: yes (reload chk)
Errors: problem: 2.4 and 5.0mhz WiFi are always on. Even setting the closing option in the menu does not change. Pressing the external keys sometimes closes the 2.4 or 5.0 but not both. Even setting the power on / off key wifi with wifi closed at startup remains lit.
Updating: at the moment I have the problem in reverse: the wifi does not work. If I try to activate it with the keys the relative LEDs light up but the WiFi is not activated in 2.4 or 5.0 mhz
Last edited by Frakko on Wed Aug 01, 2018 4:57; edited 2 times in total
EA8500
DD-WRT v3.0-r36410 std [07/28/18]
Linux 4.9.115 #119 SMP PREEMPT Wed Jul 25 13:48:45 CEST 2018 armv7l
Static leases
Local DNS
Recursive DNS Resolving
VLAN
ovpn server
USB Ext2 samba share
Wireless ok + guests on both radios
QOS HFSC FQ_Codel
NO NAT loopback on FTP(21).
NO local DNS connected to ovpn server while running unbound.
Posted: Sat Aug 04, 2018 11:48 Post subject: Upgrade
All WebGUI upgrades.
Router/Version: TP-Link Archer C7 v2
Firmware: 36410
Previous: 36330
Mode/Status: WDS AP, WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: TP-Link WDR3600 v1
Firmware: 36410
Previous: 36330
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: TP-Link TL-WR841ND v8
Firmware: 36410
Previous: 36330
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: D-Link DIR-825 B1
Firmware: 36410
Previous: 36330
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: D-Link DIR-862L A1
Firmware: 36410
Previous: 36330
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: Linksys WRT400N
Firmware: 36410
Previous: 36330
Mode/Status: WDS Station
Reset: No
Issues/Errors: Tried to connect to a Broadcom based AP that was not in the WDS list. Had to change the Broadcom's SSID so it would not try to connect to it. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Router Name TP-WA901ND
Router-Modell TP-Link TL-WA901ND v3
Firmware-Version DD-WRT v3.0-r36410 std (07/28/18)
Kernel Version Linux 3.18.116 #18739 Sat Jul 28 04:06:58 CEST 2018 mips
Upgrade from Build 36330 was not possible via web interface, so I had to use the command line.
So far, everything seems to run fine after the upgrade to build 36410.
Netgear WNDR3700 V4
DD-WRT v3.0-r36410 std [07/28/18]
Linux 3.18.116 #18773 Sat Jul 28 04:54:55 CEST 2018 mips
GUI install over r36330
This is my backup main router....just swapped it in. Nothing wrong with EA8500 but wanted to see if this old goat still worked ...
...configured exactly same as the EA8500.
Static leases
Local DNS
Recursive DNS Resolving
VLAN
ovpn server
USB Ext2 samba share
Wireless ok + guests on both radios
QOS HFSC FQ_Codel
NAT loopback on FTP(21) to local server works fine on this unit.
Everything workin great
But NO local DNS connected to ovpn server while running unbound.... tis a problem with this build.
Router: TP-Link Archer C7 v2
Firmware version: DD-WRT v3.0-r36410 std ( 07/28/18 )
Kernel version: Linux 3.18.116 #18757 Sat Jul 28 04:26:12 CEST 2018 mips
Upgraded via: WebGUI
Status:Bad Reset: 2 x 30-30-30
Upgrading from:
Firmare versión: DD-WRT v3.0-r35927 std ( 05/13/18 )
Kernel version: Linux 3.18.108 #14215 Sun May 13 04:07:07 CEST 2018 mips
---------------------------
Problem with build r36410:
The same problem in all versions from the build r35927.
DHCP server seems to stop working after some minutes and the connection in the browser stops. Seems a problem related with DNS servers, the browser is not able to do the DNS queries. I remain connected to the network, but I have no data.
If I switch off the WiFi connection from Windows and reconnect back, the connection works ok for some more minutes, but the problem it happens again.
The problem seems to only occur in the 5 GHz network.
Returning again to r35927.
---------------------------
Am I losing something about my problem?
Is this problem really still present after nine builds?
Joined: 21 Jan 2017 Posts: 1783 Location: Illinois Moderator
Posted: Mon Aug 06, 2018 20:13 Post subject:
Pibell wrote:
Router: TP-Link Archer C7 v2
Firmware version: DD-WRT v3.0-r36410 std ( 07/28/18 )
Kernel version: Linux 3.18.116 #18757 Sat Jul 28 04:26:12 CEST 2018 mips
Upgraded via: WebGUI
Status:Bad Reset: 2 x 30-30-30
Upgrading from:
Firmare versión: DD-WRT v3.0-r35927 std ( 05/13/18 )
Kernel version: Linux 3.18.108 #14215 Sun May 13 04:07:07 CEST 2018 mips
---------------------------
Problem with build r36410:
The same problem in all versions from the build r35927.
DHCP server seems to stop working after some minutes and the connection in the browser stops. Seems a problem related with DNS servers, the browser is not able to do the DNS queries. I remain connected to the network, but I have no data.
If I switch off the WiFi connection from Windows and reconnect back, the connection works ok for some more minutes, but the problem it happens again.
The problem seems to only occur in the 5 GHz network.
Returning again to r35927.
---------------------------
Am I losing something about my problem?
Is this problem really still present after nine builds?
Seems like the multicast bug... Try this in the Wireless>Security- Custom Config box of the 5ghz radio:
"multicast_to_unicast=1" (w/o quotes)
