[uragan1987]

spuriousoffspring i can login to router webinterface
computer recv 0 packets from it, cause it at booting state

i did this ddwrt-to-factory some months ago, it was working for me

[uragan1987]

@Malachi
i did a try with some other ground locations, but with same result

EDIT:

DO you mean its dead?
or should i buy USB-to-TTL-Converter and try with it?
What chip will be best choose?

[pa3fat]

USB/TTL cable costs about nothing FTDL or Prolific (last one has some fakes going on) is ok. Ebay you can find them. 5Euro/5 dollar incl shipping. If you need it fast you have buy more local. 10-12$/Euro.


Nothing to lose i think.

But unclear if you do get webinterface of router.....if so you could reload the dd-wrt firmware.

[uragan1987]

ok got now my PL2303 XA HXA Chip
after connect to board, get no output and eSATA LED is on,
after switch WHITE(RX) with GREEN(TX), still no output
did a try with other ground location, still same

pin out:
BLACK = GRND -> pin 1
WHITE = RX -> pin 2
GREEN = TX -> pin 4

[uragan1987]

i have now

3x devices:

1.

Digitus USB - Seriell Adapter
+ MAX3232 Adapter

2. Prolific PL2303HX FTDI USB to TTL

3. CP2102 6Pin USB 2.0 to TTL UART


now my idea is to check this devices,
what the best way to check it?