jerrytouille DD-WRT Guru
Joined: 11 Dec 2015 Posts: 1304
|
Posted: Sun Jun 17, 2018 6:10 Post subject: TX Power via command? |
|
Currently US country setting limits ch 36->48 max at 23 dBM. Is there a way to set tx power over the limit via command? I need it to be at least 25 dBM, and 149->161 is way too crowded in my apartment complex. _________________ R7500v2 - 38150M
RT-AC68U - stock
Wifi settings:
ac/n-ng-mixed, noise immunity, short preamble (2.4g), short gi, rts/cts+threshold, ack timing 1350, hfsc-fq_codel
*spectrum cable 100/10Mbps ipv4
QoS sauce:
htb vs hfsc: https://gist.github.com/eqhmcow/939373
fq_codel: https://tools.ietf.org/html/rfc8290
pie: https://tools.ietf.org/html/rfc8033
*Things I shared here is for reference only, ie. it works for me does not mean it will work for you. And yes apparently such disclaimer is needed around here |
|
Alozaros DD-WRT Guru
Joined: 16 Nov 2015 Posts: 6446 Location: UK, London, just across the river..
|
Posted: Sun Jun 17, 2018 10:37 Post subject: |
|
well it depends from the power amp in the router but if you change country domain to Canada or Haiti you may squeeze a bit more TX power...do keep in mind the Wi-Fi itself is locked down to 30 Mwt max but not all routers are capable to deliver that power only the more expensive once _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913 |
|