Posted: Thu Jun 07, 2018 21:33 Post subject: Re: [BRICKED] Buffalo WZR-HP-G450H - completely dead ! HELP
[quote="Ringopi"][quote="irineu"]My router is totally bricked. I've tried to unbrick w/ tftpd32/64, putty, pumpkin, serial ttl jtag, linux tftp.
The router is dead: ping is not responding, don't boot in putty (ctrl+c).
Can someone share HEX files of the 2 bios chips (Winbond 25Q128BVFG) ???[/quote]
Yesterday, my Buffalo WZR-HP-G450H router was bricked, still now i fixed it.
Follow this 2 steps , hope to able help you.
1. Watch this: [url]http://www.overclock.net/forum/18049-network-hardware/1331611-guide-recovering-bricked-buffalo-airstation-n450-router-wzr-hp-g450h.html[/url]
I fully watched and have a imaging about steps. Note to know the [b] PCB Revisions[/b] REV 1 , or REV 0 when asemble router
[quote] (Open your router and look for PCB label if unsure - Remember this, as with altering firmware WILL invalidate your Buffalo Warranty and Support!)
[/quote]
Unbricked router with this attachment open wrt firmware or this link [url]http://downloads.lede-project.org/releases/17.01.4/targets/ar71xx/generic/lede-17.01.4-ar71xx-generic-wzr-hp-g450h-squashfs-sysupgrade.bin[/url] (i tried some firmwares , but it didn't succeed)
2. Read this and choose a stable firmware with REV 0 , or REV 1 to flash by system upgrade when success unbricked . (My router has been bricked , so i downloaded by phone's 3G ):
[url]http://forums.buffalotech.com/index.php?topic=18366.0[/url]
The open Wrt firmware was not stable to make repeater router, so i update to that dd wrt firmware. It's okay fo now.[/quote]
My U-boot is gone. There is no way to recover w/o U-boot. Oh Lord... :cry:
