Weird Repeater Bridge Issues

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
View previous topic :: View next topic  
Author Message
XXirs
DD-WRT Novice


Joined: 08 Sep 2016
Posts: 39
PostPosted: Thu May 24, 2018 6:29    Post subject: Weird Repeater Bridge Issues Reply with quote
I am having very weird issues setting up my R7000 in repeater bridge over 5GHZ to my R7800. Previous builds seem to work fine but something weird is going on and i don't quite know what the cause is. First of all the R7000 does connect to the R7800 over 5GHZ just fine all devices connected to the R7000 have internet access/lan.

Here's whats weird i've done this a thousand times and reset my router about 10 times today double checking myself. Even AFTER setting the local ip to 192.168.1.2 and rebooting. I can never access the router via its webui OR telnet. I have also tried pinging 192.168.1.2 and it says its "unreachable". Weird part this at some point a few hours back it started working again until i rebooted my main router and has since not came back.

Any advice on this issue would be appreciated!

TLDR: Cant access R7000(Repeater Bridge) WebUI or telnet once it has been setup and verified connected to host router(R7800).

Both routers have latest kong build!
Back to top View user's profile Send private message
Sponsor
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2670
Location: Indy
PostPosted: Thu May 24, 2018 12:17    Post subject: Re: Weird Repeater Bridge Issues Reply with quote
XXirs wrote:
TLDR: Cant access R7000(Repeater Bridge) WebUI or telnet once it has been setup and verified connected to host router(R7800).

Both routers have latest kong build!
Is httpd crashing? Have you checked dmesg and syslog (`cat /var/log/messages`)?
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Back to top View user's profile Send private message
XXirs
DD-WRT Novice


Joined: 08 Sep 2016
Posts: 39
PostPosted: Thu May 24, 2018 12:58    Post subject: Re: Weird Repeater Bridge Issues Reply with quote
jwh7 wrote:
XXirs wrote:
TLDR: Cant access R7000(Repeater Bridge) WebUI or telnet once it has been setup and verified connected to host router(R7800).

Both routers have latest kong build!
Is httpd crashing? Have you checked dmesg and syslog (`cat /var/log/messages`)?


No idea because telnet stops working as well, pretty much I have no way to access the router once it's setup in repeater bridge mode.
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum