R6400v2 with Kong fw

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
dadfeight
DD-WRT Novice


Joined: 18 May 2018
Posts: 1

PostPosted: Fri May 18, 2018 18:23    Post subject: R6400v2 with Kong fw Reply with quote
I currently have this router loaded with version 3.0-r34800M of Kong's firmware and it's working... mostly. I want to reload the stock Netgear firmware but it's not letting me. I've tried using the admin interface with different versions of the NG fw and lays says successful but comes back to wrt. I've done the 30-30-30 reset numerous times. I'also tried using TFTP2 as well as the Win10 http client to PUT the fw with no success.

I would like to wipe it completely bare and then try the tftp but can't figure that out. Can anyone help?
Sponsor
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5165
Location: Akershus, Norway

PostPosted: Sun May 20, 2018 7:34    Post subject: Reply with quote
Please post in the Broadcom forum.
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7211
Location: Columbus, Ohio

PostPosted: Sun May 20, 2018 12:09    Post subject: Reply with quote
Wasn't aware the v2 was supported. It's not listed. Stop doing 30/30/30, you'll probably have to rever using serial.
_________________
I am far from a guru, I'm barely a novice.
wub901
DD-WRT Novice


Joined: 22 Jun 2017
Posts: 19

PostPosted: Sun May 20, 2018 23:57    Post subject: Reply with quote
It,s not supported as far as I am aware
Navelpluiz
DD-WRT Novice


Joined: 19 Jan 2018
Posts: 16
Location: Netherlands

PostPosted: Sat May 26, 2018 18:15    Post subject: Reply with quote
wub901 wrote:
It,s not supported as far as I am aware


Correct : not supported YET.

Some guys put some bucks together and send a R6400V2 to Kong.
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=312828&highlight=

_________________
OS: Main: Debian 9 , but like to play arround with all kinds of linux flavours on diff partitions.
Shuttle XH61V Quad-Core Intel Core™ i5-3470 CPU @ 3.20GHz
NetGear R6400-V2 Firmware: V1.0.2.52_1.0.39
Experia Box V10 with 200/200 Fibre.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 3964
Location: Netherlands

PostPosted: Tue Jun 05, 2018 8:08    Post subject: Reply with quote
Support for R6400v2 is imminent see: https://svn.dd-wrt.com// perhaps in the upcomming BS build already
_________________
Routers:Netgear R7800, Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
Install guide Linksys EA6900: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291230
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum