New Build 35874 (BS): 05-04-2018-r35874

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2587
Location: Indy

PostPosted: Fri May 04, 2018 14:06    Post subject: New Build 35874 (BS): 05-04-2018-r35874 Reply with quote
Downloads at:
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2018/05-04-2018-r35874/
ftp://ftp.dd-wrt.com/betas/2018/05-04-2018-r35874/
Also: alternate DD-WRT website link.

Changelogs:
SVN Changelog: Since last build: 35831
Summary: (deprecated after 29739)

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.10 and newer
2. krack fixes for Broadcom were completed in 33678, including k26 (33655) & k24 (33656).

Tickets closed as 'fixed' (Broadcom-related and general):

Issues, observations, and/or workarounds reported:
1. (egc) Policy-Based Routing broken if SFE enabled: http://svn.dd-wrt.com/ticket/5900
quarkysg's PBR+SFE fix: http://svn.dd-wrt.com/ticket/5986
2. (egc) "OpenVPN 2.4 is stable but you have to tweak your config" with: `mtu-disc yes` & `proto udp4`
3. Many router builds too big to flash: http://svn.dd-wrt.com/ticket/6144
4. (Brimmy) WZR-1750DHP/DHPD DNSCrypt kills internet connection, no overclocking, NTP does not load
5. Wireless is broken for all modes on all k3.x and k2.x builds after 35531.
Tickets: 6258, 6259, 6260

Template to copy (after "Code:") for posting a reply:
Code:
[b]Router/Version: [/b]
[b]Firmware: [/b]
[b]Kernel: [/b]
[b]Reset?/Mode: [/b]
[b]Issues/Errors: [/b]

WARNING: This build thread is for reporting success and/or problems with loading this experimental test build.
This is important info for developers and users. Always state your hardware model, version, and SPECIFIC build (e.g. dd-wrt.v24-33555_NEWD-2_K3.x_mega-nv64k.bin). Create your own thread to discuss any specific problems or questions, and refrain to respond as this thread is for reporting, not support. Posts not meeting this criteria may be deleted or moved. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't understand the risk or know what build to flash and how to flash properly, with a means of recovery if it bricks, do NOT flash this experimental test build.

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 20.7.3|FT2020.6: EA6900v1.1@1GHz, F7D8302@532|DD 44528: DIR-810L, WNDR4500v2 & 4000@533,
R6300v1, RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT 19.7.3: RT-ACRH13, R6220, WNDR3700v4


Last edited by jwh7 on Wed May 09, 2018 19:37; edited 1 time in total
Sponsor
myersw
DD-WRT Guru


Joined: 13 Jun 2006
Posts: 1609
Location: SE Michigan USA

PostPosted: Fri May 04, 2018 18:24    Post subject: Reply with quote
Router/Version: Netgear r8000
Firmware: DD-WRT v3.0-r35874 std (05/04/1Cool
Kernel: Linux 4.4.131 #3055 SMP Fri May 4 07:16:22 CEST 2018 armv7l
Reset?/Mode: No/Gateway
Issues/Errors: No problems at this time.

Guess I am the first to brave the new build. Running without issue on my Netgear r8000.

_________________
Unifi Security Gateway: Unifi Firmware
Netgear r7800: Voxel Firmware
Modem:Netgear CM500V voice and Data.
ISP:Comcast
tutorial for flashing "WRT" series:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=287813
DD-WRT Installation, Upgrade & Basic Setup–Cliff Notes:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117
Kong DD-WRT Config Tutorial:
http://www.instructables.com/id/Install-and-Configure-a-DD-WRT-Kong-Router/
I tried to be normal once. Worst 2 minutes ever.
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 411

PostPosted: Fri May 04, 2018 18:39    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r35874 std ( 05/04/18 )
Kernel: Linux 4.4.131 #3050 SMP Fri May 4 06:44:50 CEST 2018 armv7l
Previous: r35831
Mode/Status: Gateway / working
Reset: no
Issues/Errors: None so far, but the paint's still wet.

Uptime: 15m
Temperatures: CPU 63.6 °C / WL0 45.8 °C / WL1 49.5 °C

geertmeyer
DD-WRT Novice


Joined: 16 Jan 2016
Posts: 3

PostPosted: Fri May 04, 2018 20:35    Post subject: Reply with quote
Router/Version: cisco E4200
Firmware: dd-wrt.v24-35874_NEWD-2_K2.6_mini-e4200( 05/04/18
Previous: r35531
Mode/Status: Gateway / working
Reset: no
Issues/Errors: No WIFI since r35531
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 694
Location: Hung Hom, Hong Kong

PostPosted: Sat May 05, 2018 3:12    Post subject: BS Build 35831,35874: Source Net cannot be blank Reply with quote
Right after I flashed this build from 35770, there was no internet:

Code:
root@RT-N18U:~# nslookup www.google.com
nslookup: can't resolve '(null)'

nslookup: can't resolve 'www.google.com'
root@RT-N18U:~# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendto: Network unreachable
root@RT-N18U:~# ping www.google.com
ping: bad address 'www.google.com'
root@RT-N18U:~#

Then I did a factory reset. Internet was back!!!! Next, I added back a rule in port-forwarding screen. Bang ... BOOM... no internet. Even SSH was not accessible. Telnet still worked.

SO I telnet into DD-WRT, and did ping tests. Everything worked. So only LAN clients could not access internet, but not DD-WRT itself.

Then I remembered a post I responded to bdg2 in the Atheros forum ( https://www.dd-wrt.com/phpBB2/viewtopic.php?t=314868 ), and set the Source Net field to "0.0.0.0/0" instead of a BLANK. HA HA HA HA... internet was BACK!

This is a serious bug as everyone has been using a blank Source Net to mean all interfaces. You better fix this ASAP by always translating a blank Source Net into "0.0.0.0/0" in the codes.

I will follow up with another test success post for this build. This post is just about the bug.

Update:

And do NOT forget about those wikis pages that talk about port-forwarding. I barely remember that they also assumed a blank Source Net to mean all interfaces.

This bug reminded me of another previous bug I reported about a blank Source Net field (builds 32667 to 32767), being displayed as "¸ÖÁv". jwh7 replied me on that ( https://www.dd-wrt.com/phpBB2/viewtopic.php?t=314739 ).

Related changeset: http://svn.dd-wrt.com/changeset/35770


_________________
Router: Asus RT-N18U (rev. A1)

May the Force and farces be with you! Live long and proper!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
zerophase
DD-WRT User


Joined: 02 Feb 2016
Posts: 65

PostPosted: Sat May 05, 2018 7:44    Post subject: Reply with quote
Router/Version: Asus AC5300
Firmware: 35874
Kernel: Not Sure
Reset?/Mode: Had to enter recovery mode
Issues/Errors: Router locked up and I need to flash back to 35831 with the asus firmware restoration tool
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5798
Location: Romerike, Norway

PostPosted: Sat May 05, 2018 10:12    Post subject: Reply with quote
Router/Version: Asus RT-AC66U A1
Firmware: 35874
Kernel: 3.X
Reset?/Mode:
Issues/Errors: All wifi interfaces broadcast as "Ad-hoc". Connecting not possible
slobodan
DD-WRT Guru


Joined: 03 Nov 2011
Posts: 1551
Location: Zwolle

PostPosted: Sat May 05, 2018 13:33    Post subject: Reply with quote
zerophase wrote:
Router/Version: Asus AC5300
Firmware: 35874
Kernel: Not Sure
Reset?/Mode: Had to enter recovery mode
Issues/Errors: Router locked up and I need to flash back to 35831 with the asus firmware restoration tool

RT-AC56U: same story.

_________________
2 times RT-AC56U running 33772 with entware-ng, Yamon 3 (SFE disabled).

Asus RT-N16 running Merlin LTS fork RT-N16_3.0.0.4_374.43_2-25E8j9527.trx with entware-ng.

2 times Asus RT-N16 running dd-wrt.v24-33772_NEWD-2_K3.x_big.bin with entware-ng

E4200 V1 running dd-wrt.v24-33772_NEWD-2_K3.x_mega-e3000.bin

3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running dd-wrt.v24-33772_NEWD-2_K3.x_mega-e3000.bin (bridged with LAN cable)

Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 381

PostPosted: Sat May 05, 2018 13:39    Post subject: Reply with quote
Router/Version: Buffalo WZR-1750DHP/DHPD
Firmware: DD-WRT v3.0-r35874 std (05/04/18
Kernel: Linux 4.4.131 #3050 SMP Fri May 4 06:44:50 CEST 2018 armv7l
Previous: BSr34760
Mode/Status: Wonky?/Different/not sure how to express it
CPU overclocked to 1200mhz from default 800mhz
Reset: yes via webGUI and via telnet erase nvram
Issues/Errors: DNSCrypt kills internet connection only if i use a resolver that is not IPV6, no overclocking support and NTP does not load only if i use a DNSCrypt resolver that is not IPV6, unit must be power cycled after flash or the Buffalo logo would blink 3 times every ten seconds or so indicating bad/corrupt flash

Things i have noticed....when i backup i get a full description of the build version rather than just nvrambak. Adding Source Net 0.0.0.0/0 made the router see the internet for LAN i had WIFI.

I ran iptables -L iptables -t nat -LBefore i added 0.0.0.0/0 to the Source Net.
iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination

iptables -t nat -L
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination

I ran iptables -L after adding Source Net of 0.0.0.0/0, this is the result. I am changing the IP addresses just for my sanity, i hope you understand BS.
Chain INPUT (policy ACCEPT)
target prot opt source destination
DROP 0 -- 59.66.23.182/16 59.66.23.216
DROP 0 -f anywhere anywhere
DROP tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/NONE
DROP tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/FIN,SYN,RST,PSH,ACK,URG
ACCEPT 0 -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT udp -- anywhere anywhere udp spt:bootps dpt:bootpc
DROP udp -- anywhere anywhere udp dpt:route
ACCEPT udp -- anywhere anywhere udp dpt:route
ACCEPT udp -- anywhere anywhere udp dpt:route
ACCEPT 0 -- anywhere anywhere
DROP icmp -- anywhere anywhere
DROP igmp -- anywhere anywhere
ACCEPT 0 -- anywhere anywhere state NEW
ACCEPT 0 -- anywhere anywhere state NEW
DROP 0 -- anywhere anywhere
ACCEPT tcp -- anywhere anywhere tcp dpt:http limit: avg 25/min burst 100
ACCEPT tcp -- anywhere anywhere tcp flags:RST/RST limit: avg 2/sec burst 2
DROP 0 -- anywhere anywhere recent: CHECK seconds: 8640 name: portscan side: source
Chain FORWARD (policy ACCEPT)
target prot opt source destination
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:53558
ACCEPT 0 -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT gre -- 59.66.23.182/16 anywhere
ACCEPT tcp -- 59.66.23.182/16 anywhere tcp dpt:1723
lan2wan 0 -- anywhere anywhere
ACCEPT 0 -- anywhere anywhere
ACCEPT 0 -- anywhere anywhere
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpt:27391
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:27391
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpt:27050
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:1500
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:3005
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:3101
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:4380
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:27030
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:28960
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:3074
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpt:3074
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:3074
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpt:27050
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:27030
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpt:1150
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:1150
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpt:28910
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:5165
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:27901
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpt:27050
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:27015
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:27030
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:4380
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpt:27391
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:27391
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpts:27014:27050
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:1500
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:3005
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:3101
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpts:3478:4380
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpts:27000:27030
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:28960
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:3074
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpt:3074
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:3074
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpts:27014:27050
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpts:27000:27030
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpts:1116:1150
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpts:1116:1150
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpt:28910
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:5165
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpts:27900:27901
ACCEPT tcp -- anywhere PortaL.flowtrinidad.com tcp dpts:27014:27050
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpts:27000:27015
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpts:27015:27030
ACCEPT udp -- anywhere PortaL.flowtrinidad.com udp dpt:4380
TRIGGER 0 -- anywhere anywhere TRIGGER type:in match:0 relate:0
trigger_out 0 -- anywhere anywhere
ACCEPT 0 -- anywhere anywhere state NEW
DROP 0 -- anywhere anywhere
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
ACCEPT 0 -- anywhere anywhere
Chain advgrp_1 (0 references)
target prot opt source destination
Chain advgrp_10 (0 references)
target prot opt source destination
Chain advgrp_2 (0 references)
target prot opt source destination
Chain advgrp_3 (0 references)
target prot opt source destination
Chain advgrp_4 (0 references)
target prot opt source destination
Chain advgrp_5 (0 references)
target prot opt source destination
Chain advgrp_6 (0 references)
target prot opt source destination
Chain advgrp_7 (0 references)
target prot opt source destination
Chain advgrp_8 (0 references)
target prot opt source destination
Chain advgrp_9 (0 references)
target prot opt source destination
Chain grp_1 (0 references)
target prot opt source destination
Chain grp_10 (0 references)
target prot opt source destination
Chain grp_2 (0 references)
target prot opt source destination
Chain grp_3 (0 references)
target prot opt source destination
Chain grp_4 (0 references)
target prot opt source destination
Chain grp_5 (0 references)
target prot opt source destination
Chain grp_6 (0 references)
target prot opt source destination
Chain grp_7 (0 references)
target prot opt source destination
Chain grp_8 (0 references)
target prot opt source destination
Chain grp_9 (0 references)
target prot opt source destination
Chain lan2wan (1 references)
target prot opt source destination
Chain logaccept (0 references)
target prot opt source destination
LOG 0 -- anywhere anywhere state NEW LOG level warning tcp-sequence tcp-options ip-options prefix `ACCEPT '
ACCEPT 0 -- anywhere anywhere
Chain logdrop (0 references)
target prot opt source destination
LOG 0 -- anywhere anywhere state NEW LOG level warning tcp-sequence tcp-options ip-options prefix `DROP '
LOG 0 -- anywhere anywhere state INVALID LOG level warning tcp-sequence tcp-options ip-options prefix `DROP '
DROP 0 -- anywhere anywhere
Chain logreject (0 references)
target prot opt source destination
LOG 0 -- anywhere anywhere LOG level warning tcp-sequence tcp-options ip-options prefix `WEBDROP '
REJECT tcp -- anywhere anywhere reject-with tcp-reset
Chain trigger_out (1 references)
target prot opt source destination
TRIGGER tcp -- anywhere anywhere tcp dpt:27391 TRIGGER type:out match:27391 relate:27391
TRIGGER udp -- anywhere anywhere udp dpt:27391 TRIGGER type:out match:27391 relate:27391
TRIGGER tcp -- anywhere anywhere tcp dpts:27014:27050 TRIGGER type:out tcp match:27014-27050 relate:27014-27050
TRIGGER udp -- anywhere anywhere udp dpt:1500 TRIGGER type:out udp match:1500 relate:1500
TRIGGER udp -- anywhere anywhere udp dpt:3005 TRIGGER type:out udp match:3005 relate:3005
TRIGGER udp -- anywhere anywhere udp dpt:3101 TRIGGER type:out udp match:3101 relate:3101
TRIGGER udp -- anywhere anywhere udp dpts:3478:4380 TRIGGER type:out udp match:3478-4380 relate:3478-4380
TRIGGER udp -- anywhere anywhere udp dpts:27000:27030 TRIGGER type:out udp match:27000-27030 relate:27000-27030
TRIGGER udp -- anywhere anywhere udp dpt:28960 TRIGGER type:out udp match:28960 relate:28960
TRIGGER udp -- anywhere anywhere udp dpt:3074 TRIGGER type:out udp match:3074 relate:3074
TRIGGER tcp -- anywhere anywhere tcp dpt:3074 TRIGGER type:out match:3074 relate:3074
TRIGGER udp -- anywhere anywhere udp dpt:3074 TRIGGER type:out match:3074 relate:3074
TRIGGER tcp -- anywhere anywhere tcp dpts:27014:27050 TRIGGER type:out tcp match:27014-27050 relate:27014-27050
TRIGGER udp -- anywhere anywhere udp dpts:27000:27030 TRIGGER type:out udp match:27000-27030 relate:27000-27030
TRIGGER tcp -- anywhere anywhere tcp dpts:1116:1150 TRIGGER type:out match:1116-1150 relate:1116-1150
TRIGGER udp -- anywhere anywhere udp dpts:1116:1150 TRIGGER type:out match:1116-1150 relate:1116-1150
TRIGGER tcp -- anywhere anywhere tcp dpt:28910 TRIGGER type:out tcp match:28910 relate:28910
TRIGGER udp -- anywhere anywhere udp dpt:5165 TRIGGER type:out udp match:5165 relate:5165
TRIGGER udp -- anywhere anywhere udp dpts:27900:27901 TRIGGER type:out udp match:27900-27901 relate:27900-27901
TRIGGER tcp -- anywhere anywhere tcp dpts:27014:27050 TRIGGER type:out tcp match:27014-27050 relate:27014-27050
TRIGGER udp -- anywhere anywhere udp dpts:27000:27015 TRIGGER type:out udp match:27000-27015 relate:27000-27015
TRIGGER udp -- anywhere anywhere udp dpts:27015:27030 TRIGGER type:out udp match:27015-27030 relate:27015-27030
TRIGGER udp -- anywhere anywhere udp dpt:4380 TRIGGER type:out udp match:4380 relate:4380

I ran iptables -t nat -L after adding Source Net of 0.0.0.0/0, this is the result. I am changing the IP addresses just for my sanity, i hope you understand BS.
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
DNAT udp -- anywhere 59.66.23.182 udp dpt:53558 to:100.66.0.121:53558
DNAT icmp -- anywhere 59.66.23.182 to:100.66.64.2
DNAT tcp -- anywhere 59.66.23.182 tcp dpt:27391 to:100.66.0.121:27391
DNAT udp -- anywhere 59.66.23.182 udp dpt:27391 to:100.66.0.121:27391
DNAT tcp -- anywhere 59.66.23.182 tcp dpt:27014 to:100.66.0.121:27050
DNAT udp -- anywhere 59.66.23.182 udp dpt:1500 to:100.66.0.121:1500
DNAT udp -- anywhere 59.66.23.182 udp dpt:3005 to:100.66.0.121:3005
DNAT udp -- anywhere 59.66.23.182 udp dpt:3101 to:100.66.0.121:3101
DNAT udp -- anywhere 59.66.23.182 udp dpt:3478 to:100.66.0.121:4380
DNAT udp -- anywhere 59.66.23.182 udp dpt:27000 to:100.66.0.121:27030
DNAT udp -- anywhere 59.66.23.182 udp dpt:28960 to:100.66.0.121:28960
DNAT udp -- anywhere 59.66.23.182 udp dpt:3074 to:100.66.0.121:3074
DNAT tcp -- anywhere 59.66.23.182 tcp dpt:3074 to:100.66.0.121:3074
DNAT udp -- anywhere 59.66.23.182 udp dpt:3074 to:100.66.0.121:3074
DNAT tcp -- anywhere 59.66.23.182 tcp dpt:27014 to:100.66.0.121:27050
DNAT udp -- anywhere 59.66.23.182 udp dpt:27000 to:100.66.0.121:27030
DNAT tcp -- anywhere 59.66.23.182 tcp dpt:1116 to:100.66.0.121:1150
DNAT udp -- anywhere 59.66.23.182 udp dpt:1116 to:100.66.0.121:1150
DNAT tcp -- anywhere 59.66.23.182 tcp dpt:28910 to:100.66.0.121:28910
DNAT udp -- anywhere 59.66.23.182 udp dpt:5165 to:100.66.0.121:5165
DNAT udp -- anywhere 59.66.23.182 udp dpt:27900 to:100.66.0.121:27901
DNAT tcp -- anywhere 59.66.23.182 tcp dpt:27014 to:100.66.0.121:27050
DNAT udp -- anywhere 59.66.23.182 udp dpt:27000 to:100.66.0.121:27015
DNAT udp -- anywhere 59.66.23.182 udp dpt:27015 to:100.66.0.121:27030
DNAT udp -- anywhere 59.66.23.182 udp dpt:4380 to:100.66.0.121:4380
DNAT tcp -- anywhere 59.66.23.182 tcp dpt:27391 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpt:27391 to:100.66.0.121
DNAT tcp -- anywhere 59.66.23.182 tcp dpts:27014:27050 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpt:1500 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpt:3005 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpt:3101 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpts:3478:4380 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpts:27000:27030 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpt:28960 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpt:3074 to:100.66.0.121
DNAT tcp -- anywhere 59.66.23.182 tcp dpt:3074 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpt:3074 to:100.66.0.121
DNAT tcp -- anywhere 59.66.23.182 tcp dpts:27014:27050 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpts:27000:27030 to:100.66.0.121
DNAT tcp -- anywhere 59.66.23.182 tcp dpts:1116:1150 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpts:1116:1150 to:100.66.0.121
DNAT tcp -- anywhere 59.66.23.182 tcp dpt:28910 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpt:5165 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpts:27900:27901 to:100.66.0.121
DNAT tcp -- anywhere 59.66.23.182 tcp dpts:27014:27050 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpts:27000:27015 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpts:27015:27030 to:100.66.0.121
DNAT udp -- anywhere 59.66.23.182 udp dpt:4380 to:100.66.0.121
TRIGGER 0 -- anywhere 59.66.23.182 TRIGGER type:dnat match:0 relate:0
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
SNAT 0 -- 59.66.23.182/16 anywhere to:59.66.23.216
MASQUERADE 0 -- anywhere anywhere mark match 0x80000000/0x80000000
MASQUERADE 0 -- anywhere anywhere mark match 0xd001

A present i have WIFI on 2.4&5Ghz and LAN with Source Net 0.0.0.0/0.

I will use this build for a while and see how it responds with Source net of 0.0.0.0/0 and no DNSCrypt enabled, If i get any problems i will report back.

Hope this helps you figure out where the issue/s is/are.
Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 837

PostPosted: Sun May 06, 2018 1:09    Post subject: Reply with quote
Router: Buffalo WZR-1750DHP
Firmware: buffalo-wzr-1750dhp-webflash.bin (v3.0-r35874 std)
Kernel: Linux 4.4.131 #3050 SMP Fri May 4 06:44:50 CEST 2018 armv7l
Status: Working
Reset: No
Notes on configuration:

    FTP server
    DNSMasq
    USB v3.0
    DHCP reservation

Errors:

    1. No overclocking
    2. user.info : Authentication fail after each http login
    daemon.err httpd[1396]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases

jam59
DD-WRT Novice


Joined: 06 Apr 2014
Posts: 28

PostPosted: Sun May 06, 2018 8:26    Post subject: Reply with quote
Router/Version: linksys EA6500
Firmware: DD-WRT v3.0-r35874 giga (05/04/2018)
Kernel: Linux 3.10.108-dd #18320 Mon Mar 26 12:23:30 CEST 2018 mips
Reset: No.
Mode: AP with Guest Wifis (both 2.4 and 5Ghz), Vlans
Issue(s): No wifi (Wifi is up but unable to connect). Since r35531, all intermediate versions tested had the same issue.
Previous and restored version: r35531 (the last one working fine)
jam59
DD-WRT Novice


Joined: 06 Apr 2014
Posts: 28

PostPosted: Sun May 06, 2018 8:36    Post subject: Reply with quote
Router/Version: Linksys EA6900 (v1)
Firmware: DD-WRT v3.0-r35531 giga (03/26/1Cool
Kernel: Linux 4.4.131 #3050 SMP Fri May 4 06:44:50 CEST 2018 armv7l
Previous version: r35831
Reset: No
Mode: AP with Guest Wifis (both 2.4 and 5GHz), Vlans.
Issues/Errors: None so far.
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 694
Location: Hung Hom, Hong Kong

PostPosted: Sun May 06, 2018 10:22    Post subject: Asus RT-N18U and DD-WRT BS Build 35874 Reply with quote
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r35874 std (05/04/18 )
Kernel: Linux 4.4.131 #3054 Fri May 4 07:09:51 CEST 2018 armv7l
Previous: DD-WRT v3.0-r35770 std (04/20/18 )
Mode/Status: Access Point (AP), Wired Working
Reset: NO reset during firmware upgrade
Issues/Errors: no major problems, basic router

1. To mean all source IP addresses, Source Net in Port Forwarding canNOT be blank! It needed to be "0.0.0.0/0"! See previous post.

2. Running "cat /proc/mtd" in Administration -> Commands still didn't escape special characters properly:
Code:

dev:    size   erasesize  name
mtd0: 00080000 00020000   nameboott;
mtd1: 00180000 00020000   namenvram;
mtd2: 01e00000 00020000   namelinux;
mtd3: 01c80000 00020000   namerootfs
mtd4: 06000000 00020000   nameddwrt;

Running the same command in SSH shell:
Code:

root@RT-N18U:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00080000 00020000 "boot"
mtd1: 00180000 00020000 "nvram"
mtd2: 01e00000 00020000 "linux"
mtd3: 01c80000 00020000 "rootfs"
mtd4: 06000000 00020000 "ddwrt"


3. Lots of following message:

Code:
May  5 xx:xx:xx 192.168.1.1 httpd[8029]: Request Error Code 404: File not found.


And occassionally these messages:
Code:
May  5 04:53:07 192.168.1.1 httpd[7288]: Request Error Code 401: Authorization r
equired. please note that the default username is "root" in all newer releases
...
May  5 10:51:50 192.168.1.1 :    TRAPNO:0000000e   ERRCODE:00000017   OLDMASK:00
000000        R0:00000000
....
May  5 03:01:28 192.168.1.1 mstpd: error, CTL_set_cist_bridge_config: Couldn't f
ind bridge with index 7


4. LAN LEDs still not being displayed properly

Miscellaneous:
- Router not using IPv6, VPN nor USB
- Router is NOT working 24/7
- WiFi broken in k3.x editions since build 35531?

Old problems:
a. DDNS (inadyn) crashed in build 31722
b. Testing port-forwarding via WAN IP from within LAN not working in builds 34411-34760. Needed external proxy server.
c. NTP client not working in builds 34886-34876,35034 (affecting process_monitor?)
d. The ping to www.google.com increased from 2ms to 13ms after setting a defunct
WINS server in Setup->Basic Setup->DHCP->WINS
e. The "Source Net" field in Port-Forwarding screen displayd blank field as "¸ÖÁv",
from builds 32667 to 32767. Possibly null-pointer assignment?



speedtest.dd-wrt.35874.asus.rt-n18u.jpg
 Description:
speedtest.net result for DD-WRT BS build 35874 and Asus RT-N18U
 Filesize:  6.01 KB
 Viewed:  3166 Time(s)

speedtest.dd-wrt.35874.asus.rt-n18u.jpg



_________________
Router: Asus RT-N18U (rev. A1)

May the Force and farces be with you! Live long and proper!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832


Last edited by mwchang on Sun May 06, 2018 14:46; edited 1 time in total
parco
DD-WRT User


Joined: 10 Sep 2017
Posts: 100

PostPosted: Sun May 06, 2018 14:38    Post subject: Reply with quote
when will they really repair the main problems? Rolling Eyes
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 694
Location: Hung Hom, Hong Kong

PostPosted: Sun May 06, 2018 14:43    Post subject: Reply with quote
parco wrote:
when will they really repair the main problems? Rolling Eyes

I have seen people complaining about the 5GHz wireless LAN.... maybe this is the priority as those routers are more expensive. Smile

_________________
Router: Asus RT-N18U (rev. A1)

May the Force and farces be with you! Live long and proper!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum