DD-WRT :: View topic - Kong please update DNSCrypt to v2 because v1 is down

Kong please update DNSCrypt to v2 because v1 is down

DD-WRT Forum Index -> Broadcom SoC based Hardware

Goto page Previous 1, 2

View previous topic :: View next topic

Author

Message

Dr_K
DD-WRT User

Joined: 23 Mar 2018
Posts: 445

Posted: Fri Dec 28, 2018 20:09 Post subject:

Maybe my point got lost in the details...

When you leave the NTP box blank....like <Kong> said to do....it always works

The log states it's using 216.229.0.49 it seams to also check 212.183.19 and 88.99.174.22...all aparently hard-coded into the firmware when "NTP box" is left blank

The 4 servers referenced in the last line of my last post are referring to DNScrypt servers not NTP servers

Not doubting your method works also, just stating that the only time I've had sporadic NTP issues is when I thought I knew better and specified my own
_________________
Location 1
R7800- DD-WRT v3.0-r53562 (10/03/23) Gateway
WNDR3400v1 DD-WRT v3.0-r35531_mega-nv64k (03/26/18 ) Access Point
WRT160Nv3 DD-WRT ?v3?.0-r35531 mini (03/26/18 ) Access Point
WRT54GSv5 DD-WRT v24-r33555_micro_generic (10/20/17) Repeater
Location 2
R7800- DD-WRT v3.0-r51855 (02/25/23) Gateway
R6300v2- DD-WRT v3.0-r50671 (10-26-22) Access Point
WNDR3700v2 DD-WRT v3.0-r35531 std (03/26/18 ) Access Point
E1200 v2 DD-WRT v3.0-r35531 mega-nv64k (03/26/18 ) Gateway(for trivial reasons)
RBWAPG-5HACT2HND-BE RouterOS-v6.46.4 (2/21/20) Outdoor Access Point
2x RBSXTG-5HPACD RouterOS-v6.46.4 (2/21/20) PTP Bridge 866.6Mbps-1GbpsLAN
Location 3
2x R7000- DD-WRT v3.0-r50671 (10/26/22) Access Points
2x RBWAPG-60AD RouterOS-v6.45.9 (04/30/20) PTP Bridge 2.3Gbps-1GbpsLAN
2x RBSXTsqG-5acD RouterOS-v6.49.7 (10/14/22) PTP Bridge 866.6Mbps-1GbpsLAN
Thank You BrainSlayer for ALL that you do & have done, also to "most" everyone here that shares their knowledge

Sponsor

Brimmy
DD-WRT User

Joined: 29 Mar 2015
Posts: 398

Posted: Fri Dec 28, 2018 21:18 Post subject:

Dr_K wrote:

Maybe my point got lost in the details...

It did not get lost in the details, it just never worked for me and i have been trying for months to get DNSCrypt up and running and now that i have entered the IP that Alozaros mentioned, i now have DNSCrypt up and running.

Thank you very much Alozaros.

Dr_K
DD-WRT User

Joined: 23 Mar 2018
Posts: 445

Posted: Fri Dec 28, 2018 21:43 Post subject:

Brimmy wrote:

I think it did

Dr_K wrote:

You have to leave the box blank and only select a timezone

Now here is the catch that seems to get many

In my testing in the past...once you enter anything...whether it be a name or ip address....then delete it...something gets left behind in the nvram....causing it to not work properly

Only solution is to "erase nvram" if on an older firmware or "nvram erase" if on a more current build......gui reset to default may also work...but personally I never tested it for this issue

But hey..do whatever you think you have to do to make it work
_________________
Location 1
R7800- DD-WRT v3.0-r53562 (10/03/23) Gateway
WNDR3400v1 DD-WRT v3.0-r35531_mega-nv64k (03/26/18 ) Access Point
WRT160Nv3 DD-WRT ?v3?.0-r35531 mini (03/26/18 ) Access Point
WRT54GSv5 DD-WRT v24-r33555_micro_generic (10/20/17) Repeater
Location 2
R7800- DD-WRT v3.0-r51855 (02/25/23) Gateway
R6300v2- DD-WRT v3.0-r50671 (10-26-22) Access Point
WNDR3700v2 DD-WRT v3.0-r35531 std (03/26/18 ) Access Point
E1200 v2 DD-WRT v3.0-r35531 mega-nv64k (03/26/18 ) Gateway(for trivial reasons)
RBWAPG-5HACT2HND-BE RouterOS-v6.46.4 (2/21/20) Outdoor Access Point
2x RBSXTG-5HPACD RouterOS-v6.46.4 (2/21/20) PTP Bridge 866.6Mbps-1GbpsLAN
Location 3
2x R7000- DD-WRT v3.0-r50671 (10/26/22) Access Points
2x RBWAPG-60AD RouterOS-v6.45.9 (04/30/20) PTP Bridge 2.3Gbps-1GbpsLAN
2x RBSXTsqG-5acD RouterOS-v6.49.7 (10/14/22) PTP Bridge 866.6Mbps-1GbpsLAN
Thank You BrainSlayer for ALL that you do & have done, also to "most" everyone here that shares their knowledge

blaser
DD-WRT Guru

Joined: 16 Jul 2006
Posts: 525

Posted: Sun Jan 06, 2019 16:32 Post subject:
No matter what I do, leave NTP blank of put that IP address I still get in the messages file Insecure DS reply received, do upstream DNS servers support DNSSEC? I tried cisco and adguard servers, any ideas why? _________________ Netgear R9000 main router RAX80 as AP

Dr_K
DD-WRT User

Joined: 23 Mar 2018
Posts: 445

Posted: Sun Jan 06, 2019 16:45 Post subject:

blaser wrote:

No matter what I do, leave NTP blank of put that IP address I still get in the messages file
Insecure DS reply received, do upstream DNS servers support DNSSEC?

I tried cisco and adguard servers, any ideas why?

Take a look at your "dnscrypt-resolvers.csv" file..

Located @ /etc/dnscrypt/

See if your choice of servers actually supports DNSSEC....or turn it off

Not sure why you're relating that to NTP though?
_________________
Location 1
R7800- DD-WRT v3.0-r53562 (10/03/23) Gateway
WNDR3400v1 DD-WRT v3.0-r35531_mega-nv64k (03/26/18 ) Access Point
WRT160Nv3 DD-WRT ?v3?.0-r35531 mini (03/26/18 ) Access Point
WRT54GSv5 DD-WRT v24-r33555_micro_generic (10/20/17) Repeater
Location 2
R7800- DD-WRT v3.0-r51855 (02/25/23) Gateway
R6300v2- DD-WRT v3.0-r50671 (10-26-22) Access Point
WNDR3700v2 DD-WRT v3.0-r35531 std (03/26/18 ) Access Point
E1200 v2 DD-WRT v3.0-r35531 mega-nv64k (03/26/18 ) Gateway(for trivial reasons)
RBWAPG-5HACT2HND-BE RouterOS-v6.46.4 (2/21/20) Outdoor Access Point
2x RBSXTG-5HPACD RouterOS-v6.46.4 (2/21/20) PTP Bridge 866.6Mbps-1GbpsLAN
Location 3
2x R7000- DD-WRT v3.0-r50671 (10/26/22) Access Points
2x RBWAPG-60AD RouterOS-v6.45.9 (04/30/20) PTP Bridge 2.3Gbps-1GbpsLAN
2x RBSXTsqG-5acD RouterOS-v6.49.7 (10/14/22) PTP Bridge 866.6Mbps-1GbpsLAN
Thank You BrainSlayer for ALL that you do & have done, also to "most" everyone here that shares their knowledge

blaser
DD-WRT Guru

Joined: 16 Jul 2006
Posts: 525

Posted: Sun Jan 06, 2019 18:27 Post subject:

Dr_K wrote:

blaser wrote:

OK, thanks about dnssec.
NTP, I was reading above that time server needs to be empty or that specific ip.
_________________
Netgear R9000 main router
RAX80 as AP

x3r0iD
DD-WRT Novice

Joined: 11 Jan 2020
Posts: 1

Posted: Sat Jan 11, 2020 20:19 Post subject: Anonymized DNSCryptv2 via dnscrypt-proxy

I just wanted to update an older post in case others stumbled upon it and were interested. Fully anonymized DNScryptv2 is available for DD-WRT via the dnscrypt-proxy project. To reduce the binary's filesize, you have to pack it using UPX (or another packer).

Here is a link to the documentation and current release:

https://github.com/DNSCrypt/dnscrypt-proxy/wiki/Installation-on-OpenWRT

Here is the announcement link with more details:

https://github.com/DNSCrypt/dnscrypt-proxy/issues/960

Enjoy!

Alozaros
DD-WRT Guru

Joined: 16 Nov 2015
Posts: 6435
Location: UK, London, just across the river..

Posted: Sun Jan 12, 2020 7:10 Post subject:

for running dnscrypt-proxy 2 via Entware on DDWRT.. have a look here..

https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1172544#1172544

the old DNScrypt 1.95 is still running on DDWRT via GUI on high class, large flash size routers...
_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55779 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913

E-TARD
DD-WRT Novice

Joined: 17 Oct 2015
Posts: 9
Location: Silicon Valley, California

Posted: Mon May 29, 2023 11:31 Post subject: The only way to get dnscrypt-proxy2

From what I see the only way to get to dnscrypt-proxy v2.
Is to walk away from dd-wrt Rolling Eyes

& go to: OpenWrt

https://openwrt.org/docs/guide-user/services/dns/dnscrypt_dnsmasq_dnscrypt-proxy2

https://openwrt.org/packages/pkgdata/dnscrypt-proxy2
_________________
https://mastodon.online/@ETARD_The_LifeCaster
https://twitter.com/etard_webcam/
Router Model: Linksys WRT3200ACM
CPU: Marvell Armada 88F6820-A0 C180
WLAN: Marvell 88W8964
Flash: 256MB (NAND)
RAM: 512MB (DDR3)
SWAP: 9GB (USB)
Firmware: DD-WRT v3.0-r54682 std (01/02/24)

Alozaros
DD-WRT Guru

Joined: 16 Nov 2015
Posts: 6435
Location: UK, London, just across the river..

Posted: Mon May 29, 2023 12:32 Post subject: Re: The only way to get dnscrypt-proxy2

E-TARD wrote:

From what I see the only way to get to dnscrypt-proxy v2.
Is to walk away from dd-wrt Rolling Eyes

& go to: OpenWrt

https://openwrt.org/docs/guide-user/services/dns/dnscrypt_dnsmasq_dnscrypt-proxy2

https://openwrt.org/packages/pkgdata/dnscrypt-proxy2

From what I see..you click on the green link in my signature and run DNScrypt-proxy v2 via Entware
and you dont need to go to OpenWRT... Laughing

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55779 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913

dale_gribble39
DD-WRT Guru

Joined: 11 Jun 2022
Posts: 1927

Posted: Mon May 29, 2023 15:19 Post subject: Re: The only way to get dnscrypt-proxy2

E-TARD wrote:

From what I see the only way to get to dnscrypt-proxy v2.
Is to walk away from dd-wrt Rolling Eyes

& go to: OpenWrt

https://openwrt.org/docs/guide-user/services/dns/dnscrypt_dnsmasq_dnscrypt-proxy2

https://openwrt.org/packages/pkgdata/dnscrypt-proxy2

Which is not included in their default build configuration, either. So, the point is moot.
_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.
--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5

Goto page Previous 1, 2

Display posts from previous:

Page 2 of 2

DD-WRT Forum Index -> Broadcom SoC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum

Log in

Kong please update DNSCrypt to v2 because v1 is down

Quick Links

Log in