Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.10 and newer 2. krack fixes for Broadcom were completed in 33678, including k26 (33655) & k24 (33656).
3. BS made a couple NTP changes in changesets 35454 and 35455; hopefully that fixes those issues.
Tickets closed as 'fixed' (Broadcom-related and general): 6233: LZO Frame Compression option not working
6239: LZO detection logic is wrong
Issues, observations, and/or workarounds reported: 1. (egc) Policy-Based Routing broken if SFE enabled: http://svn.dd-wrt.com/ticket/5900 quarkysg's PBR+SFE fix: http://svn.dd-wrt.com/ticket/5986 2. (egc) "OpenVPN 2.4 is stable but you have to tweak your config" with: `mtu-disc yes` & `proto udp4` 3.Many router builds too big to flash: http://svn.dd-wrt.com/ticket/6144
35531: build sizes are reduced, but appears not enough 4. (Brimmy) WZR-1750DHP/DHPD DNSCrypt kills internet connection, no overclocking, NTP does not load
Template to copy (after "Code:") for posting a reply:
WARNING:This build thread is for reporting success and/or problems with loading this experimental test build.
This is important info for developers and users. Always state your hardware model, version, and SPECIFIC build (e.g. dd-wrt.v24-33555_NEWD-2_K3.x_mega-nv64k.bin). Create your own thread to discuss any specific problems or questions, and refrain to respond as this thread is for reporting, not support. Posts not meeting this criteria may be deleted or moved. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't understand the risk or know what build to flash and how to flash properly, with a means of recovery if it bricks, do NOT flash this experimental test build. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Last edited by jwh7 on Wed May 02, 2018 19:49; edited 3 times in total
Router/Version: Asus RT-AC87U
Firmware: DD-WRT v3.0-r35531 std (03/26/1 Kernel: Linux 4.4.124 #2815 SMP Mon Mar 26 08:07:31 CEST 2018 armv7l
Reset: Yes
Issues/Errors: Yes
With both this build mentioned above and the previous build (03-20-2018-r35452) ipv6 doesn't work anymore. I have tried plugging my modem straight into my computer and I get an ipv6 address. When I plug it into the router ipv6 doesn't work anymore. It was last working for me on build 03-05-2018-r35244
Joined: 13 Jun 2006 Posts: 1608 Location: SE Michigan USA
Posted: Mon Mar 26, 2018 20:50 Post subject:
Router/Version: Netgear r8000 Firmware: DD-WRT v3.0-r35531 std (03/26/1 Kernel: Linux 4.4.124 #2813 SMP Mon Mar 26 07:52:16 CEST 2018 armv7l Reset?/Mode: Reset/gateway Issues/Errors: none
Running well so far on the r8000, but installed less then an hour ago so too early to really tell. _________________ Unifi Security Gateway:Unifi Firmware Netgear r7800:Voxel Firmware Modem:Netgear CM500V voice and Data. ISP:Comcast tutorial for flashing "WRT" series: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=287813 DD-WRT Installation, Upgrade & Basic Setup–Cliff Notes: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117 Kong DD-WRT Config Tutorial: http://www.instructables.com/id/Install-and-Configure-a-DD-WRT-Kong-Router/ I tried to be normal once. Worst 2 minutes ever.
If you can get there with a web browser, I suggest using it to download and then copy the file to /tmp with scp, WinSCP, etc....That is if your route to the server is not broken. _________________ -----------------------------------
Netgear R7000
Router Model: Buffalo WZR-1750DHP
Version: DD-WRT v3.0-r35531 std (03/26/18)
Kernel Version: Linux 4.4.124 #2808 SMP Mon Mar 26 07:20:58 CEST 2018 armv7l
Temperatures: CPU 90.2 °C / WL0 58.5 °C / WL1 50.3 °C
Previous: Linux 4.4.116-rc1 #530 SMP Mon Feb 19 23:02:30 CET 2018 armv7l
Status:: AP / Static DHCP x12 / QoS HFSC - FQ-CODEL
Reset: GUI reset before Flash
Errors: Speed tests erratic, especially Upload & buffer bloat (AT&T 18/1.5).
Same result witn Kong 33530M. Reverting to 35030M which is somewhat erratic but not as extreme.
Posted: Mon Mar 26, 2018 23:06 Post subject: WNDR4000 CB+AP
Router/Version: Netgear WNDR4000
Firmware: DD-WRT v3.0-r35531 mega ( 03/26/18 )
Kernel: Linux 3.10.108-dd #18336 Mon Mar 26 12:37:55 CEST 2018 mips
Reset?/Mode: No reset / 2.4 GHz CB + 5 GHz AP + guest VAP
Issues/Errors: Was on 34929 before, no nvram reset like was reported with 35452. Otherwise working fine after 15 min. Just connected to the wireless, to test for a while. Update: wireless was still working fine this morning _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Last edited by jwh7 on Tue Mar 27, 2018 13:21; edited 1 time in total
Router/Version: Buffalo WZR-1750DHP/DHPD Firmware: DD-WRT v3.0-r35531 std (03/26/1 Kernel: Linux 4.4.124 #2808 SMP Mon Mar 26 07:20:58 CEST 2018 armv7l Previous: BSr34760 Mode/Status: A bit better Reset: yes via webGUI Issues/Errors: DNSCrypt kills internet connection only if i use a resolver that is not IPV6, no overclocking support and NTP does not load only if i use a DNSCrypt resolver that is not IPV6
Error one, Internet access light on the router loads without any issues as long as i do not use DNSCrypt reslover that is IPV6, if i use a resolver that is not IPV6 the Internet access light just won't load and i can't get internet access, so i am guessing that the issue is with the resolver now, IDK. Syslog shows the following in RED when i reset to factory....Jan 1 00:00:29 DD-WRT daemon.info dnscrypt-proxy[957]: This certificate has not been activated yet
Jan 1 00:00:29 DD-WRT daemon.err dnscrypt-proxy[957]: No useable certificates found
Jan 1 00:00:32 DD-WRT daemon.info dnscrypt-proxy[957]: Refetching server certificates
Jan 1 00:00:33 DD-WRT daemon.info dnscrypt-proxy[957]: Server certificate with serial #1519853401 received
Jan 1 00:00:33 DD-WRT daemon.info dnscrypt-proxy[957]: This certificate has not been activated yet
Jan 1 00:00:33 DD-WRT daemon.err dnscrypt-proxy[957]: No useable certificates found
Jan 1 00:00:39 DD-WRT daemon.info dnscrypt-proxy[957]: Refetching server certificates
Jan 1 00:00:39 DD-WRT daemon.info dnscrypt-proxy[957]: Server certificate with serial #1519853401 received
Jan 1 00:00:39 DD-WRT daemon.info dnscrypt-proxy[957]: This certificate has not been activated yet
Jan 1 00:00:39 DD-WRT daemon.err dnscrypt-proxy[957]: No useable certificates found
and if i do not reset to factory defaults i get this in RED Mar 27 04:05:22 DD-WRT daemon.err process_monitor[1043]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Error two, NTP servers does not load and syslog record shows this in RED....Mar 27 04:05:22 DD-WRT daemon.err process_monitor[1043]: and Current Time = Not available is shown on the Status page.
Error three, error is the no overclocking support anymore only the down clocking is allowed, please bring that back.
The first two errors go away if i use a DNSCrypt resolver that is IPV6
Things i tried to resolve this with no luck are, 30/30/30, telnet and erase nvram, erase nvram through the wbeGUI command box.
I will be using this build to see if any other issues arise and if they do i will report on it.
Joined: 18 Jul 2017 Posts: 45 Location: Wisconsin, USA
Posted: Tue Mar 27, 2018 14:13 Post subject:
Router/Version: Linksys EA6500 v1
Firmware: DD-WRT v3.0-r35531 giga ( 03/26/18 )
Kernel: Linux 3.10.108-dd #18320 Mon Mar 26 12:23:30 CEST 2018 mips
Previous: DD-WRT v3.0-r35452 giga ( 03/20/18 )
Mode/Status: Gateway/AP
Setup: Using IPv6 via DNSMasq, DDNS, & Port Range Forward.
Reset: No
Issues/Errors: None so far
Stable, uptime of 20:30 so far. CPU load still seems high at startup but other than that everything appears to be working normally. _________________
Joined: 05 Mar 2018 Posts: 21 Location: In your Heart
Posted: Tue Mar 27, 2018 16:12 Post subject:
Router/Version:Linksys E900 Firmware: DD-WRT v3.0-r35531 mega (03/26/18) -> K3.x_mega-nv64k.bin Kernel: Linux 3.10.108-dd #18336 Mon Mar 26 12:37:55 CEST 2018 mips
Previous: DD-WRT v3.0-r35244 mega (03/05/18) -> K3.x_mega-nv64k.bin Mode/Status: Access Point/Repeater/Client, works without problem -> Linking Routers Reset: Factory Defaults and 30/30/30
Issues/Errors: None
Uptime: 1 days
Last edited by E900 on Thu Apr 09, 2020 1:13; edited 1 time in total
Router Name
DD-WRT
Router-Modell
TP-Link Archer C9
Firmware-Version
DD-WRT v3.0-r35531 (03/26/1
Kernel Version
Linux 4.4.124 #2810 SMP Mon Mar 26 07:38:19 CEST 2018 armv7l
reset yes 0/0/0 soft
yes 30/30/30
Error: wlan timer doesn't work on my router. it's been around a while, but i need it now.
Joined: 26 Mar 2013 Posts: 1857 Location: Hung Hom, Hong Kong
Posted: Tue Mar 27, 2018 17:32 Post subject: DD-WRT BS Build 35531 and Asus RT-N18U
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r35531 std (03/26/1 Kernel: Linux 4.4.124 #2812 Mon Mar 26 07:45:56 CEST 2018 armv7l
Previous: DD-WRT v3.0-r35244 std (03/05/18 )
Mode/Status: Access Point (AP), Wired Working
Reset: NO reset during firmware upgrade
Issues/Errors:
1. The ping to www.google.com increased from 2ms to 13ms
2. root@rt-n18u:/tmp/var/log# grep -i error messages
Code:
Mar 27 17:22:42 rt-n18u daemon.err httpd[1077]: Request Error Code 404: File not found.
Mar 27 17:22:44 rt-n18u daemon.err httpd[1077]: Request Error Code 404: File not found.
Mar 27 17:22:45 rt-n18u daemon.err httpd[1077]: Request Error Code 404: File not found.
Mar 27 17:22:47 rt-n18u daemon.err httpd[1077]: Request Error Code 404: File not found.
Mar 27 17:22:48 rt-n18u daemon.err httpd[1077]: Request Error Code 404: File not found.
Mar 27 17:22:50 rt-n18u daemon.err httpd[1077]: Request Error Code 404: File not found.
Mar 27 17:24:40 rt-n18u daemon.err httpd[1077]: Request Error Code 404: File not found.
Mar 27 17:24:49 rt-n18u daemon.err httpd[1077]: Request Error Code 404: File not found.
Mar 27 17:24:56 rt-n18u daemon.err httpd[1077]: Request Error Code 404: File not found.
Mar 27 18:22:39 rt-n18u daemon.err process_monitor[1223]: cyclic NTP Update success (servers time.hko.hk)
Mar 27 19:15:24 rt-n18u daemon.err httpd[2286]: Request Error Code 404: File not found.
Mar 27 19:15:25 rt-n18u daemon.err httpd[2286]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Mar 27 19:15:30 rt-n18u daemon.err httpd[2286]: Request Error Code 404: File not found.
Mar 27 19:15:32 rt-n18u daemon.err httpd[2286]: Request Error Code 404: File not found.
Mar 27 19:15:40 rt-n18u daemon.err httpd[2286]: Request Error Code 404: File not found.
Mar 27 19:15:42 rt-n18u daemon.info mstpd: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 7
Miscellaneous:
- Router not using IPv6, VPN nor USB
- Router is NOT working 24/7
- LAN LED ... too lazy to check! Meow... >@.@<
- Wireless function is off for the meantime
Old problems:
a. DDNS (inadyn) crashed in build 31722
b. Testing port-forwarding via WAN IP from within LAN not working in builds 34411-34760. Needed external proxy server.
c. NTP client not working in builds 34886-34876,35034 (affecting process_monitor?)
d. The ping to www.google.com increased from 2ms to 13ms after setting a defunct
WINS server in Setup->Basic Setup->DHCP->WINS
speedtest.net.asus.rt-n18u.dd-wrt.bs.35531.png
Description:
speedtest.net result for asus.rt-n18u and dd-wrt.bs.35531 (re-tested)
Filesize:
10.47 KB
Viewed:
15788 Time(s)
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r35531 std (03/26/18 )
Kernel: Linux 4.4.124 #2812 Mon Mar 26 07:45:56 CEST 2018 armv7l
Previous: r35452
Mode/Status: Gateway/Working
Reset: No
Issues/Errors: Yes
Same errors in Syslog as with number of previous builds.
Quote:
Mar 26 21:34:49 router daemon.info httpd[1131]: Authentication fail
Mar 26 21:34:49 router daemon.err httpd[1131]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Mar 26 21:34:54 router daemon.err httpd[1131]: Request Error Code 404: File not found.
Router/Version: Netgear WNDR4500v2
Firmware: DD-WRT v3.0-r35531 giga ( 03/26/18 )
Kernel: Linux 3.10.108-dd #18320 Mon Mar 26 12:23:30 CEST 2018 mips
Reset?/Mode: No / 2.4GHz CB + 5GHz + guest VAP
Issues/Errors: Up 30 min; NTP time works:
Jan 1 00:00:21 WNDR4500v2 user.info : nas : NAS daemon successfully stopped
Jan 1 00:00:21 WNDR4500v2 user.info : NAS : NAS wan (wl0 interface) successfully started
Jan 1 00:00:22 WNDR4500v2 user.info : NAS : NAS lan (wl1 interface) successfully started
Jan 1 00:00:22 WNDR4500v2 user.info : NAS : NAS lan (wl1.1 interface) successfully started
Jan 1 00:00:29 WNDR4500v2 daemon.debug ntpclient[1615]: Connecting to us.pool.ntp.org [96.244.96.19] ...
Mar 28 00:05:06 WNDR4500v2 daemon.info ntpclient[1615]: Time set from us.pool.ntp.org [96.244.96.19].
Been up two days, no issues; connected to work on 5 GHz all morning, then on it's VAP all afternoon. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Last edited by jwh7 on Thu Mar 29, 2018 23:54; edited 2 times in total
