New Build 35452 (BS): 03-20-2018-r35452

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3, 4  Next
Author Message
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6388
Location: UK, London, just across the river..

PostPosted: Tue Mar 20, 2018 18:39    Post subject: New Build 35452 (BS): 03-20-2018-r35452 Reply with quote
ftp://ftp.dd-wrt.com/betas/2018/03-20-2018-r35452/

Please report errors on this topic.


Release Notes:
http://svn.dd-wrt.com/timeline

Router Model:

Status:
Reset:
Errors:

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55363 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55363 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Sponsor
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1628
Location: Belgrade

PostPosted: Tue Mar 20, 2018 19:56    Post subject: Reply with quote
Router Model GL.iNet-AR150
Firmware Version DD-WRT v3.0-r35452 std (03/20/1Cool
Kernel Version Linux 3.18.100 #10348 Tue Mar 20 07:35:11 CET 2018 mips




Status: Ok (sees to me that works very fast - low latency)
Reset: No
Errors: None (I use basic config)


Thx BS!!!
Bloodlessplace
DD-WRT Novice


Joined: 17 Jun 2017
Posts: 3

PostPosted: Tue Mar 20, 2018 21:10    Post subject: Reply with quote
Router Model ------- TP-Link ARCHER-C7 v2
Firmware Version --- DD-WRT v3.0-r35452 std 03/20/18
Kernel Version ----- Linux 3.18.100 #10316 Tue Mar 20 06:23:57 CET 2018 mips

Status: Multiple Wireless Issues
Reset: No (Will attempt very soon)
Errors: See below for devices tested and issues.

Device Name --- LG G3 D855
OS ------------ Android 6.0
Issue 01 ---- Fails to connect when router using "VHT80 (80 MHz)"
Issue 02 ---- Fails to connect when router using "AC Only"
Issue 03 ---- Fails to connect when router using "Wide HT40 (40MHz)"

Device Name --- Lenovo Yoga Tab 3 Pro
OS ------------ Android 6.0
Issue 01 ------ Can connect and operate on all 5GHz network modes and channel widths (Occurrences of disconnections and internet issues have been recorded)

Device Name --- Apple iPad Mini 2
OS ------------ IOS 11.2.6
Issue 01 ---- Fails to connect when router using "VHT80 (80 MHz)"
Issue 02 ---- Fails to connect when router using "AC Only"
Issue 03 ---- Fails to connect when router using "Wide HT40 (40MHz)"
------------- When using above bands and channel widths ipad reports incorrect password

Devices that are able to connect when using "Wide HT40 (40MHz)", "VHT80 (80 MHz)" seem to have low link speeds of 150M and lower (Device tested has max capable link speed of 866M).

Devices have also been tested using "Jperf2.0" and only achive max transfer speed of roughly 200Mbps (When using "AC/N-Mixed" & "Dynamic (20/40 MHz)"). Increasing settings and testing results in much lower sub 100Mbps results.

Other than this i have located no other issues and will continue testing.

If you would like to conduct any further tests for the above issues or give you any other information please let me know and i shall do what i can.
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Tue Mar 20, 2018 21:12    Post subject: Reply with quote
read the wifi settings link below, 96% sure i know what u set wrong already
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55416 std
[QUALCOMM] DIR-862L --------------------------------> r55416 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Tue Mar 20, 2018 21:21    Post subject: Reply with quote
Router Model: dir-862L, dir-862L, wndr4300, r7800

Status: it runs
Reset: no
Errors: see tickets below

http://svn.dd-wrt.com/ticket/3616
http://svn.dd-wrt.com/ticket/5118 *
http://svn.dd-wrt.com/ticket/5225 *
http://svn.dd-wrt.com/ticket/5279
http://svn.dd-wrt.com/ticket/5600
http://svn.dd-wrt.com/ticket/5603 *
http://svn.dd-wrt.com/ticket/5699
http://svn.dd-wrt.com/ticket/5817
http://svn.dd-wrt.com/ticket/5845
http://svn.dd-wrt.com/ticket/5848
http://svn.dd-wrt.com/ticket/5875
http://svn.dd-wrt.com/ticket/5913
http://svn.dd-wrt.com/ticket/5933
http://svn.dd-wrt.com/ticket/5938
http://svn.dd-wrt.com/ticket/5942
http://svn.dd-wrt.com/ticket/5992
http://svn.dd-wrt.com/ticket/6006
http://svn.dd-wrt.com/ticket/6023 *
http://svn.dd-wrt.com/ticket/6036
http://svn.dd-wrt.com/ticket/6059
http://svn.dd-wrt.com/ticket/6113 *
http://svn.dd-wrt.com/ticket/6115 *
http://svn.dd-wrt.com/ticket/6180
http://svn.dd-wrt.com/ticket/6183
http://svn.dd-wrt.com/ticket/6214
http://svn.dd-wrt.com/ticket/6229
http://svn.dd-wrt.com/ticket/6239

k4 qos/ipq will never be fixed

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55416 std
[QUALCOMM] DIR-862L --------------------------------> r55416 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

Bloodlessplace
DD-WRT Novice


Joined: 17 Jun 2017
Posts: 3

PostPosted: Tue Mar 20, 2018 21:44    Post subject: Reply with quote
Hello, i have just made some adjustments based on the "wifi settings link" that you informed me about and there seems to be some improvement.

The Lenovo Yoga tab 3 pro is now getting an average download speed of 250Mbps using "Jperf2.0", although still no where near its theoretical rated maximum of 866Mbps.

The LG G3 D855 is now able to connect to the channel width "VHT80 (80MHz)" and receives average download speed of 10Mbps using "Jperf2.0".

Apple ipad mini 2 however still is unable to connect.

I will attach screenshot of settings for you to verify and do apologise if i have misread your instructions.
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Tue Mar 20, 2018 21:47    Post subject: Reply with quote
cause thats all it is.. a theoretical max that is impossible to get wifi has always been like this, its got overhead. 250mbps is acceptable for a tablet, as its a low power device & i dont know what hardware is in it (cpu power matters here) an also router tx power is low. there is other settings mentioned that i see arent changed, like short preamble.

try a 36-48 or 149-161 channel (with proper extension setting) the ipad probably doesnt support dfs channels (52-144)

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55416 std
[QUALCOMM] DIR-862L --------------------------------> r55416 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

nyddwrtuser330
DD-WRT User


Joined: 05 Mar 2018
Posts: 217

PostPosted: Tue Mar 20, 2018 22:35    Post subject: still buggy Reply with quote
1 - still broken massively logging - last 3 releaased builds --
daemon.err httpd[1078]: Request Error Code 408: No request appeared within a reasonable time period.

2. SSH with certificate is still broken in last 3 releases. not sure if these are related.

Router ModelTP-Link ARCHER-C7 v2
Firmware Version DD-WRT v3.0-r35452 std (03/20/1Cool
Kernel VersionLinux 3.18.100 #10316 Tue Mar 20 06:23:57 CET 2018 mips
Bloodlessplace
DD-WRT Novice


Joined: 17 Jun 2017
Posts: 3

PostPosted: Tue Mar 20, 2018 22:41    Post subject: Reply with quote
Ok, everything seems to be working well now, ive set the channel to 36, seems that anything but the tablet has trouble operating on channel 50 and above, i would try the channel 149-161 which you recommended, however i could not seem to get the option to display.

Anyway, thank you for the support and help, i do really appreciate the time which you have taken out to assist me in learning something new and finding a resolution to my problem.
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Tue Mar 20, 2018 23:46    Post subject: Reply with quote
cause ur using UK reg domain, switch it to US/canada/haiti and they will appear (must have the same reg domain for both bands). depending on where ur devices were bought they may have a region lock on them for a country that doesnt support those channels so they wont see or connect to them, if that happens just select a lower 36-48 channel again. reg domain dont matter for that, a channel is a channel (when a common channel is used that all support), only for tx power limits and channel availability it matters
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55416 std
[QUALCOMM] DIR-862L --------------------------------> r55416 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

AKA_SK
DD-WRT User


Joined: 11 Jan 2018
Posts: 122

PostPosted: Tue Mar 20, 2018 23:56    Post subject: Reply with quote
Router Model: D-Link DIR-859 A3

Firmware Version: DD-WRT v3.0-r35452 std (03/20/1Cool
Kernel Version: Linux 3.18.100 #10322 Tue Mar 20 06:34:15 CET 2018 mips

Status:OK
Reset: 1
Errors: None with basic configuration.

Fixes:
LZO compression frame option is fixed for 2.4GHz AP.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6264
Location: Texas

PostPosted: Wed Mar 21, 2018 0:26    Post subject: Reply with quote
EA8500
DD-WRT v3.0-r35452 std [03/20/18]
Linux 4.9.88 #64 SMP PREEMPT Sun Mar 18 18:56:11 CET 2018 armv7l
9980 still on ath10k 10.4-3.5.3-00050
and yea it has 128k nvram ... for whatever reason.
ovpn server good
VLAN good
static leases good
SAMBA share Ext4 good
local DNS good
radios good
LZO Frame Compression is still disabled both radio and GUI
Wireless Nodes now do not show any LZO so guess that is fixed....have to look into that afterlater.

still using 3 sets openNIC (non-logging) DNS servers ...aint even gonna turn on unbound.

QOS seems decent so far -- only run the two test from da winders machine looks lot better for me than BS last build Smile
FF
http://www.dslreports.com/speedtest/31170179
chrome
http://www.dslreports.com/speedtest/31170226

not really sure why I updated over Kong 35400M --- now I have to contend with the k4.x FTP noworking no-loopback bullcrap.

only up 27 min but she tis running okydokey I reckon

yea I played with it some on the other EA8500 before installing on mian

had to run one more just see that QOS hasn't jumped the fence
http://www.dslreports.com/speedtest/31171509
still looks good too me --- 'bout all I know
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Wed Mar 21, 2018 2:36    Post subject: Reply with quote
mrjcd wrote:
EA8500
DD-WRT v3.0-r35452 std [03/20/18]
Linux 4.9.88 #64 SMP PREEMPT Sun Mar 18 18:56:11 CET 2018 armv7l
9980 still on ath10k 10.4-3.5.3-00050
and yea it has 128k nvram ... for whatever reason.
ovpn server good
VLAN good
static leases good
SAMBA share Ext4 good
local DNS good
radios good
LZO Frame Compression is still disabled both radio and GUI
Wireless Nodes now do not show any LZO so guess that is fixed....have to look into that afterlater.

still using 3 sets openNIC (non-logging) DNS servers ...aint even gonna turn on unbound.

QOS seems decent so far -- only run the two test from da winders machine looks lot better for me than BS last build Smile
FF
http://www.dslreports.com/speedtest/31170179
chrome
http://www.dslreports.com/speedtest/31170226

not really sure why I updated over Kong 35400M --- now I have to contend with the k4.x FTP noworking no-loopback bullcrap.

only up 27 min but she tis running okydokey I reckon

yea I played with it some on the other EA8500 before installing on mian

had to run one more just see that QOS hasn't jumped the fence
http://www.dslreports.com/speedtest/31171509
still looks good too me --- 'bout all I know


can u show output of "tc -d qdisc" on the ea8500 that does the qos? if its still on this bs build

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55416 std
[QUALCOMM] DIR-862L --------------------------------> r55416 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6264
Location: Texas

PostPosted: Wed Mar 21, 2018 2:41    Post subject: Reply with quote
tatsuya46 wrote:
can u show output of "tc -d qdisc" on the ea8500 that does the qos? if its still on this bs build

:~# tc -d qdisc
qdisc noqueue 0: dev lo root refcnt 2
qdisc hfsc 1: dev imq0 root refcnt 3 default 30
qdisc fq_codel 30: dev imq0 parent 1:30 limit 10240p flows 1024 quantum 1500 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc fq_codel 100: dev imq0 parent 1:100 limit 10240p flows 1024 quantum 1500 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc fq_codel 10: dev imq0 parent 1:10 limit 10240p flows 1024 quantum 1500 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc fq_codel 40: dev imq0 parent 1:40 limit 10240p flows 1024 quantum 1500 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc fq_codel 20: dev imq0 parent 1:20 limit 10240p flows 1024 quantum 1500 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc mq 0: dev imq1 root
qdisc fq_codel 0: dev imq1 parent :2 limit 10240p flows 1024 quantum 16000 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc fq_codel 0: dev imq1 parent :1 limit 10240p flows 1024 quantum 16000 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc fq_codel 0: dev eth0 root refcnt 2 limit 10240p flows 1024 quantum 1514 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc fq_codel 0: dev eth1 root refcnt 2 limit 10240p flows 1024 quantum 1514 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc noqueue 0: dev vlan1 root refcnt 2
qdisc hfsc 1: dev vlan2 root refcnt 2 default 30
qdisc fq_codel 30: dev vlan2 parent 1:30 limit 10240p flows 1024 quantum 1518 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc fq_codel 100: dev vlan2 parent 1:100 limit 10240p flows 1024 quantum 1518 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc fq_codel 10: dev vlan2 parent 1:10 limit 10240p flows 1024 quantum 1518 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc fq_codel 40: dev vlan2 parent 1:40 limit 10240p flows 1024 quantum 1518 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc fq_codel 20: dev vlan2 parent 1:20 limit 10240p flows 1024 quantum 1518 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
qdisc noqueue 0: dev br0 root refcnt 2
qdisc noqueue 0: dev br1 root refcnt 2
qdisc noqueue 0: dev ath0 root refcnt 2
qdisc noqueue 0: dev ath0.1 root refcnt 2
qdisc noqueue 0: dev ath1 root refcnt 2
qdisc noqueue 0: dev ath1.1 root refcnt 2
qdisc noqueue 0: dev vlan4 root refcnt 2
qdisc fq_codel 0: dev tun2 root refcnt 2 limit 10240p flows 1024 quantum 1500 target 5.0ms interval 100.0ms memory_limit 4Mb ecn

ha that tickled the WRT54G I had to go thru to get at the EA8500 ---imma playing with old routers with the new build over in the brcm dark side Razz
zen1932
DD-WRT User


Joined: 22 Feb 2018
Posts: 77

PostPosted: Wed Mar 21, 2018 3:12    Post subject: Reply with quote
Routers: TP-Link TL-WR841ND v5, v7.1, v7.2
Firmware: v3.0-r35452 std (03/20/18 )
Kernel: 3.10.108-dd #51880
Previous: 35384
Reset: No
Status: OK
Goto page 1, 2, 3, 4  Next Display posts from previous:    Page 1 of 4
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum