Posted: Mon Dec 04, 2017 18:55 Post subject: New Build Is Up : 12-04-2017-r33986
How is it running for you?
ftp://ftp.dd-wrt.com/betas/2017/ _________________ My "WRT" rant, and why I have gone ddwrt on x86, no more consumer routers. ( ac86u as access points & bridges )
Posted: Mon Dec 04, 2017 21:09 Post subject: One hour ok
I made a webflash installation, keeping all settings on my WRT1900ACS V2.
Everything works fine. Only 1 hour uptime so far. _________________ Linksys WRT1900ACS V2 dd-wrt bs r35034
Netgear R8000 dd-wrt kongac r36440M
Joined: 11 Feb 2016 Posts: 198 Location: South London
Posted: Mon Dec 04, 2017 22:12 Post subject:
Been running for about 3 hours now without any problems _________________ | Netgear Nighthawk X4S R7800 | Linksys WRT1900ACS V1 | Huawei Echolife HG612 3B |
Installed r33986 on my WRT1900ACSv1 as a flash upgrade, keeping existing config. Will post if I have any issues.
(I am going to play with a new/first setup of OpenVPN - I'll probably break something but probably not because of any build issues .
________________
Linksys WRT1900ACS v1 - r33986
I just upgraded about an hour ago, the only issue I saw initially it didn't update time via NTP which caused my VPN to fail coming up. Another reboot solved it. May have been a network glitch, we'll see if it happens again at my 4am scheduled reboot.
Happened to me as well. As you mentioned, a reboot solved it. _________________ WRT3200ACM - Firmware: DD-WRT v3.0-r35681 std (04/06/18).
WRT160N - Repeater - Firmware: DD-WRT v24-sp2 (02/02/15) mini.
Another problem, QoS was not working. Had to disable the QoS, then re-enable it and it started working.
Looks like some services do not come up and have to be re-started. _________________ WRT3200ACM - Firmware: DD-WRT v3.0-r35681 std (04/06/18).
WRT160N - Repeater - Firmware: DD-WRT v24-sp2 (02/02/15) mini.
Joined: 05 Apr 2017 Posts: 981 Location: Louisiana, USA
Posted: Tue Dec 05, 2017 5:02 Post subject:
For those with a WRT1900AC v1:
I looked through the Changesets made from the last build to this one and as far as I can tell there is nothing for the WRT1900AC v1 reboot issue.
http://svn.dd-wrt.com/
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
I'm tempted to upgrade but hearing the issue with NTP update which I also use, I guess I'll just stay with r33772 for now.
To those who confirmed this issue, any plans of submitting a ticket in http://svn.dd-wrt.com/? _________________ Router: Linksys WRT1200AC v2
Firmware: DD-WRT v3.0-r44048 std [08/02/20]
Joined: 13 Jun 2006 Posts: 1608 Location: SE Michigan USA
Posted: Tue Dec 05, 2017 18:20 Post subject:
spuriousoffspring wrote:
For those with a WRT1900AC v1:
I looked through the Changesets made from the last build to this one and as far as I can tell there is nothing for the WRT1900AC v1 reboot issue.
http://svn.dd-wrt.com/
From everything I read BS needs to incorporate a 4.4 kernel on the wrt1900ac v1. I think you know that davidc502 on LEDE site makes a LEDE build with the 4.4 kernel for the wrt1900ac v1. Looks like Openwrt/LEDE and Brainslayer have not figured out how to get the newer firmware to run on the wrt1900ac v1 with 4.9 kernel without causing reboots. Too bad as there are lots of folks that have them. My first wrt was a wrt1900ac v1. Hind site says I should have been smart enough to run the other direction rather then sticking with the wrt's seing how long it took Marvel to put out a decent driver. Seems like it takes about a year or a little longer for a decent driver. Ran my wrt3200 for several months on OEM firmware. It was purchased on Ebay from a disgruntled purchaser. He got tired of waiting for a decent build of dd-wrt. At least the current builds Brainslayer is putting out seem to run well for me on my wrt3200 and others.
--bill _________________ Unifi Security Gateway:Unifi Firmware Netgear r7800:Voxel Firmware Modem:Netgear CM500V voice and Data. ISP:Comcast tutorial for flashing "WRT" series: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=287813 DD-WRT Installation, Upgrade & Basic Setup–Cliff Notes: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117 Kong DD-WRT Config Tutorial: http://www.instructables.com/id/Install-and-Configure-a-DD-WRT-Kong-Router/ I tried to be normal once. Worst 2 minutes ever.
Joined: 05 Apr 2017 Posts: 981 Location: Louisiana, USA
Posted: Tue Dec 05, 2017 20:02 Post subject:
myersw wrote:
From everything I read BS needs to incorporate a 4.4 kernel on the wrt1900ac v1. I think you know that davidc502 on LEDE site makes a LEDE build with the 4.4 kernel for the wrt1900ac v1. Looks like Openwrt/LEDE and Brainslayer have not figured out how to get the newer firmware to run on the wrt1900ac v1 with 4.9 kernel without causing reboots. Too bad as there are lots of folks that have them. My first wrt was a wrt1900ac v1. Hind site says I should have been smart enough to run the other direction rather then sticking with the wrt's seing how long it took Marvel to put out a decent driver. Seems like it takes about a year or a little longer for a decent driver. Ran my wrt3200 for several months on OEM firmware. It was purchased on Ebay from a disgruntled purchaser. He got tired of waiting for a decent build of dd-wrt. At least the current builds Brainslayer is putting out seem to run well for me on my wrt3200 and others.
--bill
That's really what I was hoping for. I was going to reference the LEDE Build you mentioned when I opened Ticket #6010, but I didn't want it to be taken as an insult to Brainslayer. I was concerned it would read like "Why don't you do it like these guys over here...".
I'm sure he will come up with something in the next build or two. Hopefully the additional info from the U-Boot output will help. _________________ DD-WRT Installation & Setup TUTORIAL http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
Posted: Tue Dec 05, 2017 20:26 Post subject: For the 3200 how is vht80 and vht160 connections?
How is 5ghz vht80 and vht160 connectivity for the 3200acm with this version? Have the connectivity difficulties for 5ghz been fixed in this version for the 3200?
.