New Build 35244 (BS): 03-05-2018-r35244

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5  Next
Author Message
davidm2493
DD-WRT Novice


Joined: 12 Oct 2015
Posts: 4

PostPosted: Tue Mar 06, 2018 12:50    Post subject: Reply with quote
Router/Version: Dlink-DIR868L rev A
Firmware Version: DD-WRT v3.0-r35244 std (03/05/1Cool
Kernel Version: Linux 4.4.120 #2685 SMP Mon Mar 5 08:03:45 CET 2018 armv7l
Previous: r35034
Mode/Status: AP / working
Reset: no
Issues/Errors: Cant select a Wireless Channel any-more it changed to AUTO after upgrade no options in menu
Sponsor
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 381

PostPosted: Tue Mar 06, 2018 12:59    Post subject: Re: E1500 Reply with quote
Router/Version: Buffalo WZR-1750DHP/DHPD
Firmware: DD-WRT v3.0-r35244 std (03/05/1Cool
Kernel: Linux 4.4.120 #2685 SMP Mon Mar 5 08:03:45 CET 2018 armv7l
Previous: BSr34760
Mode/Status: Working
Reset: yes via webGUI
Issues/Errors: DNSCrypt kills internet connection and no overclocking support

Errors:- Internet access light on the router loads without any issues as long as i do not use DNSCrypt, if i do use it the Internet access light just won't load and i can't get internet access, so i am guessing that the issue is with the DNSCrypt.

Next error is the no overclocking support anymore only the down clocking is allowed, please bring that back.

jwh7 wrote:
I had assumed it was because the R7000P could use the R8000 firmware, though also odd there is no trailed build from BS, only Kong. But I have neither. The first MB or so of Kong's R7000P vs R8000 only has 4 bytes different: address 0x08-0B.

Anyone tried the BS build, or otherwise know what's up? BS? Kong? Smile

Router/Version: Linksys E1500
Firmware: DD-WRT v3.0-r35244 mega ( 03/05/18 )
Kernel: Linux 3.10.108-dd #17976 Mon Mar 5 14:32:56 CET 2018 mips
Previous: 35034 k3x
Mode/Status: AP
Reset: no
Issues/Errors: Only been 15min; got the laptop wired and Nexus 5X on the wireless. Will update tomorrow. Like the F7D8302 on the last build, running `cat /proc/mtd` from Admin->Commands does not output correctly, something w/ the name field is eftup:
    dev: size erasesize name
    mtd0: 00040000 00010000 namecfeot;
    mtd1: 007b0000 00010000 namelinux;
    mtd2: 00566400 00010000 namerootfs
    mtd3: 00010000 00010000 namenvram;
    mtd4: 00060000 00010000 nameddwrt;
Maybe another clue, if I instead do `cat /proc/mtd|grep mtd` I get:
    mtd0: 00040000 00010000 °#tw¤xcfeot;
    mtd1: 007b0000 00010000 °#tw¤xlinux;
    mtd2: 00566400 00010000 °#tw¤xrootfs
    mtd3: 00010000 00010000 °#tw¤xnvram;
    mtd4: 00060000 00010000 °#tw¤xddwrt;
Never ceases to amaze me how fast this E1500 boots, and upgrades...like 15sec.

This is what i get when i run the command in the webGUI

cat /proc/mtd

dev: size erasesize name
mtd0: 00100000 00010000 nameboott;
mtd1: 00010000 00010000 namenvram_cfe
mtd2: 00010000 00010000 namenvram;cfe
mtd3: 02000000 00020000 namelinux;cfe
mtd4: 01e60000 00020000 namerootfscfe
mtd5: 06000000 00020000 nameddwrt;cfe
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2576
Location: Indy

PostPosted: Tue Mar 06, 2018 13:22    Post subject: Reply with quote
davidm2493 wrote:
Router/Version: Dlink-DIR868L rev A
Issues/Errors: Cant select a Wireless Channel any-more it changed to AUTO after upgrade no options in menu
What is your Wireless Network Mode? Use "*-Mixed" instead of "*-only". Save twice, recheck the channel.
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 20.7.1|FT2020.5: EA6900v1.1@1GHz, F7D8302@532|DD 44294: DIR-810L, WNDR4500v2 & 4000@533,
R6300v1, RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT 19.7.3: RT-ACRH13, R6220, WNDR3700v4
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 761

PostPosted: Tue Mar 06, 2018 15:20    Post subject: Re: E1500 Reply with quote
Brimmy wrote:
Router/Version: Buffalo WZR-1750DHP/DHPD
Firmware: DD-WRT v3.0-r35244 std (03/05/1Cool
Kernel: Linux 4.4.120 #2685 SMP Mon Mar 5 08:03:45 CET 2018 armv7l
Previous: BSr34760
Mode/Status: Working
Reset: yes via webGUI
Issues/Errors: DNSCrypt kills internet connection and no overclocking support

Errors:- Internet access light on the router loads without any issues as long as i do not use DNSCrypt, if i do use it the Internet access light just won't load and i can't get internet access, so i am guessing that the issue is with the DNSCrypt.



Yes - Have issues with DNSCrypt too in recent builds. I'm running Kongs builds and everything was fine up until 33800. The problems, in my case, started with 33900. I managed to get a good working configuration by switching off 'Encrypt DNS' under Services. DNSCrypt still runs however but WAN access is restored.

_________________
AC-68U rev. C1 on Build 44340
AC-68U rev. A1 on Build 44340
AC-68U rev. A1 on Build 44340
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 381

PostPosted: Tue Mar 06, 2018 17:34    Post subject: Re: E1500 Reply with quote
wabe wrote:


Yes - Have issues with DNSCrypt too in recent builds. I'm running Kongs builds and everything was fine up until 33800. The problems, in my case, started with 33900. I managed to get a good working configuration by switching off 'Encrypt DNS' under Services. DNSCrypt still runs however but WAN access is restored.


I had to turn off DNSCrypt too for WAN access but i was of the view that if you disable DNSCrypt that it would not run, and if your own is still running then what is the server that is used and how do you see or change it. My issues started after BS r34760

I have not tried any of Kong's builds as he does not support OCing and my routers are OCed to 1200mhz from the default 800mhz and i do not know what errors may happen and i didn't want to risk it.
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 761

PostPosted: Tue Mar 06, 2018 18:10    Post subject: Re: E1500 Reply with quote
Brimmy wrote:

I had to turn off DNSCrypt too for WAN access but i was of the view that if you disable DNSCrypt that it would not run, and if your own is still running then what is the server that is used and how do you see or change it. My issues started after BS r34760

Have not investigated further but you may test by running “ps” from the console and check if DNSCrypt is running. On mine it does. My DNS calls are resolved by OpenDNS which correspond to what I set in “Encrypt dns” before disabling it.

_________________
AC-68U rev. C1 on Build 44340
AC-68U rev. A1 on Build 44340
AC-68U rev. A1 on Build 44340
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 381

PostPosted: Tue Mar 06, 2018 18:18    Post subject: Re: E1500 Reply with quote
wabe wrote:

Have not investigated further but you may test by running “ps” from the console and check if DNSCrypt is running. On mine it does. My DNS calls are resolved by OpenDNS which correspond to what I set in “Encrypt dns” before disabling it.


Mine only shows DNSmasq to be running which it is. I do not see any DNSCrypt reference after running the ps command, i did see a bunch of root 0 SW< [bioset] though what the hell is that?
jopiexjoker
DD-WRT Novice


Joined: 21 Oct 2017
Posts: 13

PostPosted: Tue Mar 06, 2018 19:26    Post subject: E3000 Reply with quote
Router: Linksys E3000
mode AP/gateway
Firmware: DD-WRT v3.0-r35244 mega (03/05/1Cool
Previous: DD-WRT v3.0-r35034 mega (02/17/18 )
Kernel: Linux 3.10.108-dd #17976 Mon Mar 5 14:32:56 CET 2018 mips
Reset: No
Errors: None yet

uptime 15 minutes.

Speedtests Ok.
homerforpres
DD-WRT Novice


Joined: 06 Mar 2018
Posts: 2

PostPosted: Tue Mar 06, 2018 22:16    Post subject: E3000 Reply with quote
Router/Version: Linksys E3000
Firmware: DD-WRT v3.0-r35244 mega (03/05/1Cool
Previous: DD-WRT v3.0-r33772 mega (11/16/17)
Kernel: Linux 3.10.108-dd #17976 Mon Mar 5 14:32:56 CET 2018 mips
Mode/Status: Gateway/AP
Reset: Yes
Issues/Errors: None

Speedtests: Ok
Everything running smooth so far.
blackraiin
DD-WRT Novice


Joined: 27 Dec 2017
Posts: 44

PostPosted: Wed Mar 07, 2018 1:05    Post subject: Reply with quote
Router/Version: D-Link DIR868L
Firmware: DD-WRT v3.0-r35244 std (03/05/1Cool
Previous: Kong's DD-WRT test build 35030M - 2018/02/19
Kernel: Linux 4.4.120 #2685 SMP Mon Mar 5 08:03:45 CET 2018 armv7l
Mode/Status: Gateway/AP
Reset: Yes
Issues/Errors: I restored my settings from a backup but I am unable to connect to vpn settings from previous build and setup. However I am connected to the internet.



Screen Shot 2018-03-06 at 5.14.42 PM.png
 Description:
 Filesize:  61.64 KB
 Viewed:  2935 Time(s)

Screen Shot 2018-03-06 at 5.14.42 PM.png


Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 810

PostPosted: Wed Mar 07, 2018 2:26    Post subject: Reply with quote
Router: Buffalo WZR-1750DHP
Firmware: buffalo-wzr-1750dhp-webflash.bin (v3.0-r35244 std)
Kernel: Linux 4.4.120 #2685 SMP Mon Mar 5 08:03:45 CET 2018 armv7l
Status: Working
Reset: No
Notes on configuration:

    FTP server
    DNSMasq
    USB v3.0
    DHCP reservation

Errors:

    1. No overclocking
    2. user.info : Authentication fail after each http login
    3. On every hour (should not be err): daemon.err process_monitor[]: cyclic NTP Update success



NTP is fixed!!! Very Happy Thank you devs!!
ian5142
DD-WRT Guru


Joined: 23 Oct 2013
Posts: 2135
Location: Canada

PostPosted: Wed Mar 07, 2018 3:11    Post subject: Upgrade Reply with quote
Router/Version: Asus N66u
Firmware: 35244
Previous: 35034
Mode/Status: Gateway, DHCP, QoS
Reset: No
Issues/Errors: None, so far.

_________________
Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.

Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one, I am trying to update them.

Atheros:
Netgear R7800 - gateway, DHCP, QoS, VPN
TP-Link Archer C7 v2 x2 - WDS AP, WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - WDS Station
D-Link 615 C1 x 4 - not used
D-Link 615 E3 x 2 - not used
D-Link 825 B1 - WDS Station
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - WDS Station
UBNT loco M2 x2 - airOS

Broadcom
Asus N66U - backup Gateway
Netgear r6300 v1 - AP
Linksys E2500 - not used
Linksys EA2700 - not used
Linksys 160N v3 x2 - not used
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - not used
E900
DD-WRT Novice


Joined: 05 Mar 2018
Posts: 24
Location: In your Heart

PostPosted: Wed Mar 07, 2018 9:53    Post subject: Reply with quote
Someone already tested it on an E900?

I am afraid to install it and can not recover the router.
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 692
Location: Hung Hom, Hong Kong

PostPosted: Wed Mar 07, 2018 12:35    Post subject: Reply with quote
E900 wrote:
Someone already tested it on an E900?
I am afraid to install it and can not recover the router.

No un-brick instructions? No recovery mode?

_________________
Router: Asus RT-N18U (rev. A1)

May the Force and farces be with you! Live long and proper!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2576
Location: Indy

PostPosted: Wed Mar 07, 2018 14:27    Post subject: Reply with quote
E900 wrote:
Someone already tested it on an E900?

I am afraid to install it and can not recover the router.
The E1500 is identical (besides a minor SoC revision; BCM5357 rev B0 vs C0) and both use nv64k firmware. I've been running this build for two days.

Edit: now updated a E2500 (nv60k) too...

Router/Version: Linksys E2500
Firmware: DD-WRT v3.0-r35244 mega ( 03/05/18 )
Kernel: Linux 3.10.108-dd #17976 Mon Mar 5 14:32:56 CET 2018 mips
Previous: 33772 k3x
Mode/Status: Gateway router, inside my LAN [and then, AP]
Reset: no [and then, yes]
Issues/Errors: ok, so after not being able to get the wireless to connect, I reset and setup as an AP. Got wireless to connect, didn't touch any Advanced settings. I think I enabled Bluetooth Coexistence before.

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 20.7.1|FT2020.5: EA6900v1.1@1GHz, F7D8302@532|DD 44294: DIR-810L, WNDR4500v2 & 4000@533,
R6300v1, RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT 19.7.3: RT-ACRH13, R6220, WNDR3700v4


Last edited by jwh7 on Thu Mar 08, 2018 2:00; edited 4 times in total
Goto page Previous  1, 2, 3, 4, 5  Next Display posts from previous:    Page 2 of 5
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum