DD-Wrt and Cyberghost

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Advanced Networking
Goto page 1, 2  Next
Author Message
mattygg
DD-WRT Novice


Joined: 02 Jan 2011
Posts: 8

PostPosted: Sat Feb 24, 2018 23:18    Post subject: DD-Wrt and Cyberghost Reply with quote
Good Evening All,

I was wondering whether anyone can help me, I have been trying all evening to get this working, but to no avail.

I currently have a Linksys E900 router running build 21061, which is the latest build for my router. The router works fine at the moment with no VPN added, so I know that my network is running fine. I am trying to install Cyberghost onto the router via the OpenVPN settings, however i cannot seem to do it. I have followed the guide on their website, which didn't work, and after looking through some forums i found that it appears to be quite old. I cannot even seem to get any information appearing on the "status" tab, so i cant even find any error codes to try and "google"

https://support.cyberghostvpn.com/hc/en ... RT-routers

I have also changed the DNS servers on the front page to the current google ones, as that was advised on a forum.

Due to this being an older build i have added the line "auth-user-pass /tmp/key.txt" and then added the username and password given from the website (not my log in detail).

I'm hoping that someone here has it working and could send me through their config.

Any help, guidance or things to try would be greatly appreciated

Thanks Matt
Sponsor
mattygg
DD-WRT Novice


Joined: 02 Jan 2011
Posts: 8

PostPosted: Sun Feb 25, 2018 21:15    Post subject: Nearly There Reply with quote
Thanks very much for the reply. I think I am nearly there, I'm hoping its just one box that I need to tick.

I have managed to update my firmware to the latest one and i have put all of my details into the Service>OpenVPN page. I also ticked the NAT box. I also port forwarded port 1194 on my main router too.

Im not sure whether this is correct or not but when i download my config files from the website i get 4 files , ca.crt (copied into CA Cert box), client.crt (copied into Piblic Client Cert box) and client.key (copied into Private Client Key box).

When i goto Status>OpenVPN i now have lots of writing which i didnt have before, however i think i have a TLS error. I was wondering whether you could help, i cannot seem to find any tls config files to input.

I have also copied the log from the file for you to see:

20180225 21:07:57 I [UNDEF] Inactivity timeout (--ping-restart) restarting
20180225 21:07:57 I SIGUSR1[soft ping-restart] received process restarting
20180225 21:07:57 Restart pause 5 second(s)
20180225 21:08:02 W WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
20180225 21:08:02 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
20180225 21:08:02 I TCP/UDP: Preserving recently used remote address: [AF_INET]217.151.98.47:1194
20180225 21:08:02 Socket Buffers: R=[114688->114688] S=[114688->114688]
20180225 21:08:02 I UDPv4 link local: (not bound)
20180225 21:08:02 I UDPv4 link remote: [AF_INET]217.151.98.47:1194
20180225 21:09:02 N TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
20180225 21:09:02 N TLS Error: TLS handshake failed
20180225 21:09:02 I SIGUSR1[soft tls-error] received process restarting
20180225 21:09:02 Restart pause 5 second(s)
20180225 21:09:07 W WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
20180225 21:09:07 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
20180225 21:09:07 I TCP/UDP: Preserving recently used remote address: [AF_INET]89.238.139.199:1194
20180225 21:09:07 Socket Buffers: R=[114688->114688] S=[114688->114688]
20180225 21:09:07 I UDPv4 link local: (not bound)
20180225 21:09:07 I UDPv4 link remote: [AF_INET]89.238.139.199:1194
20180225 21:09:32 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
20180225 21:09:32 D MANAGEMENT: CMD 'state'
20180225 21:09:32 MANAGEMENT: Client disconnected
20180225 21:09:32 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
20180225 21:09:32 D MANAGEMENT: CMD 'state'
20180225 21:09:32 MANAGEMENT: Client disconnected
20180225 21:09:32 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
20180225 21:09:32 D MANAGEMENT: CMD 'state'
20180225 21:09:32 MANAGEMENT: Client disconnected
20180225 21:09:32 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
20180225 21:09:32 D MANAGEMENT: CMD 'status 2'
20180225 21:09:32 MANAGEMENT: Client disconnected
20180225 21:09:32 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
20180225 21:09:32 D MANAGEMENT: CMD 'log 500'
20180225 21:09:32 MANAGEMENT: Client disconnected
20180225 21:10:07 N TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
20180225 21:10:07 N TLS Error: TLS handshake failed
20180225 21:10:07 I SIGUSR1[soft tls-error] received process restarting
20180225 21:10:07 Restart pause 5 second(s)
20180225 21:10:12 W WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.

Thanks again for your help
mattygg
DD-WRT Novice


Joined: 02 Jan 2011
Posts: 8

PostPosted: Sun Feb 25, 2018 21:21    Post subject: Reply with quote
Also, I'm not sure which Encryption cipher I need to use. The default was blowfish CBC, however I'm wondering whether I need AES-256 so it matches the hashing algorithm.

Cheers again
mattygg
DD-WRT Novice


Joined: 02 Jan 2011
Posts: 8

PostPosted: Sun Feb 25, 2018 23:39    Post subject: Reply with quote
I have looked in the config file and I have seen that its AES-256 and SHA256 for both values.

I have also checked and it is showing as gateway for operating mode.

I am still however getting tls-error messages.

Yes the router is using the LAN to WAN connection
mattygg
DD-WRT Novice


Joined: 02 Jan 2011
Posts: 8

PostPosted: Sun Feb 25, 2018 23:44    Post subject: Reply with quote
Also in the config file it says 443. I'm not sure whether this is the port number or not.

However when I change it within the settings from 1194 to 443 I seem to lose connection.

Not sure if that helps or not
mattygg
DD-WRT Novice


Joined: 02 Jan 2011
Posts: 8

PostPosted: Mon Feb 26, 2018 0:16    Post subject: Reply with quote
Hiya,

This is the config file from the website:

client
remote 1-gb.cg-dialup.net 443
dev tun
proto udp
auth-user-pass


resolv-retry infinite
redirect-gateway def1
persist-key
persist-tun
nobind
cipher AES-256-CBC
auth SHA256
ping 5
ping-exit 60
ping-timer-rem
explicit-exit-notify 2
script-security 2
remote-cert-tls server
route-delay 5
tun-mtu 1500
fragment 1300
mssfix 1300
verb 4
comp-lzo


ca ca.crt

cert client.crt

key client.key


I hope that helps
mattygg
DD-WRT Novice


Joined: 02 Jan 2011
Posts: 8

PostPosted: Mon Feb 26, 2018 12:03    Post subject: Reply with quote
Thanks very much for your help.

I have managed to get it working. Im not sure why, but the UK servers dont seem to like the OpenVPN however, i have changed to the US servers and it seems to be working ok.

The only other thing i did was looking on the config file it shows the "tunnel udp fragment" disabled as a default. however it looks at though I have the value of 1300 in my config file. I have changed it to 1300 also and it seems to be ok.

Thanks again for your help
spikey1973
DD-WRT Novice


Joined: 20 Feb 2017
Posts: 35

PostPosted: Fri May 24, 2019 23:00    Post subject: Reply with quote
hello Matt, Matt here Wink

unfortunately we do not only have the same name but also the same issue. unlike you i still cant seem to get it solved.

may i ask you to do for me what you asked for?
and send me a copy of your setup (without username and passw and other identifier markers)

you would seriously help me out there!

kind regards in advance!

Matt
spikey1973
DD-WRT Novice


Joined: 20 Feb 2017
Posts: 35

PostPosted: Fri May 24, 2019 23:37    Post subject: Reply with quote
i will add two screenshots of my settings
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Sat May 25, 2019 7:52    Post subject: Reply with quote
I am pretty sure you have to enable NAT
But that should be in the cyberghost instructions

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
spikey1973
DD-WRT Novice


Joined: 20 Feb 2017
Posts: 35

PostPosted: Sat May 25, 2019 9:24    Post subject: Reply with quote
Oke thank you,

NAT has now been enabled, even though in the cyberghost setup i wasn't enabled. never the less it doesn't make a difference, unfortunately.

Matt

ps. i don't see my screenshots anymore?
spikey1973
DD-WRT Novice


Joined: 20 Feb 2017
Posts: 35

PostPosted: Sat May 25, 2019 12:34    Post subject: Reply with quote
thank you for your comments, i will take that in account.

reply on ping 8.8.8.8: (with NAT enabled)

PING 8.8.8.8 (8.8.8.Cool: 56 data bytes
64 bytes from 8.8.8.8: seq=0 ttl=56 time=149.775 ms
64 bytes from 8.8.8.8: seq=1 ttl=56 time=14.267 ms
64 bytes from 8.8.8.8: seq=2 ttl=56 time=14.267 ms
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 14.267/59.436/149.775 ms

reply on ping cnn.com

PING cnn.com (151.101.65.67): 56 data bytes
64 bytes from 151.101.65.67: seq=0 ttl=56 time=226.482 ms
64 bytes from 151.101.65.67: seq=1 ttl=56 time=14.915 ms
64 bytes from 151.101.65.67: seq=2 ttl=56 time=14.390 ms
--- cnn.com ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 14.390/85.262/226.482 ms

which means i am indeed connected and DNS is working.
which is true cause i am online behind the router but i am on my own ip adress not the vpn's ip.

i will post the syslog directly in the post below.
spikey1973
DD-WRT Novice


Joined: 20 Feb 2017
Posts: 35

PostPosted: Sat May 25, 2019 12:38    Post subject: Reply with quote
System Log
Jan 1 01:00:10 DD-WRT syslog.info syslogd started: BusyBox v1.24.2
Jan 1 00:00:10 DD-WRT user.info : klogd : klog daemon successfully started
Jan 1 00:00:10 DD-WRT kern.notice kernel: klogd started: BusyBox v1.24.2 (2016-12-15 06:31:45 CET)
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.000000] Linux version 3.18.45 (root@nmndev) (gcc version 6.1.0 (LEDE GCC 6.1.0 r1259) ) #3077 Thu Dec 15 06:31:31 CET 2016
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.000000] cpu apb ddr apb cpu 720 ddr 600 ahb 200
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.000000] sys id = 1130 Qualcomm Atheros QCA9558 ver 1 rev 1.0 (0x1130)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.000000] Determined physical RAM map:
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.000000] memory: 04000000 @ 00000000 (usable)
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.000000] Zone ranges:
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.000000] Movable zone start for each node
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.000000] Early memory node ranges
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 0.000000] On node 0 totalpages: 16384
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 802df5d0, node_mem_map 81000000
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 128 pages used for memmap
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, linesize 32 bytes.
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.000000] Memory: 61488K/65536K available (2264K kernel code, 153K rwdata, 228K rodata, 160K init, 237K bss, 4048K reserved)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.000000] NR_IRQS:83
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.060000] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.060000] pid_max: default: 32768 minimum: 301
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.070000] NET: Registered protocol family 16
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 0.080000] ar71xx: using random MAC address for eth0
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 0.280000] ar71xx: using random MAC address for eth1
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.490000] ar724x-pci ar724x-pci.0: PCIe link is down
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.500000] registering PCI controller with io_map_base unset
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.500000] ar724x-pci ar724x-pci.1: PCIe link is down
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.510000] registering PCI controller with io_map_base unset
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.520000] PCI host bridge to bus 0000:00
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.520000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.530000] pci_bus 0000:00: root bus resource [io 0x0000]
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.530000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]

System Log
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.540000] PCI host bridge to bus 0000:01
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.540000] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.550000] pci_bus 0000:01: root bus resource [io 0x0001]
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.550000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 0.560000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.560000] Switched to clocksource MIPS
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.560000] NET: Registered protocol family 2
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.570000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.570000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.580000] TCP: Hash tables configured (established 1024 bind 1024)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.580000] TCP: reno registered
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.600000] NET: Registered protocol family 1
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 0.600000] PCI: CLS 0 bytes, default 32
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.600000] gpio_proc: module loaded and /proc/gpio/ created
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.610000] futex hash table entries: 256 (order: -1, 3072 bytes)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.620000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.620000] msgmni has been set to 120
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.630000] io scheduler noop registered
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.630000] io scheduler deadline registered (default)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.640000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.640000] console [ttyS0] disabled
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.670000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.680000] console [ttyS0] enabled
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.680000] bootconsole [early0] disabled
Jan 1 00:00:10 DD-WRT kern.emerg kernel: [ 0.690000] guessed flashsize = 8M
Jan 1 00:00:10 DD-WRT kern.emerg kernel: [ 0.700000] scanning for root partition
Jan 1 00:00:10 DD-WRT kern.emerg kernel: [ 0.700000] tplink uboot detected
Jan 1 00:00:10 DD-WRT kern.emerg kernel: [ 0.700000] guessed bootloader size = 20000
Jan 1 00:00:10 DD-WRT kern.emerg kernel: [ 0.720000]
Jan 1 00:00:10 DD-WRT kern.emerg kernel: [ 0.720000] found squashfs at 110000
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.730000] adjusted length 760000, original length 75E762
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.740000] Creating 9 MTD partitions on "ar7240-nor0":
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.740000] 0x000000000000-0x000000020000 : "RedBoot"
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.750000] 0x000000020000-0x0000007e0000 : "linux"
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.750000] 0x000000110000-0x000000760000 : "rootfs"
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.760000] mtd: partition "rootfs" set to be root filesystem
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.760000] 0x000000760000-0x0000007e0000 : "ddwrt"
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.770000] 0x0000007e0000-0x0000007f0000 : "nvram"
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.770000] 0x0000007f0000-0x000000800000 : "board_config"
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.780000] 0x000000000000-0x000000800000 : "fullflash"
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.790000] 0x000000000000-0x000000020000 : "fullboot"
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.790000] 0x000000010000-0x000000020000 : "uboot-env"
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.800000] libphy: Fixed MDIO Bus: probed
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.800000] tun: Universal TUN/TAP device driver, 1.6
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.810000] tun: (C) 1999-2004 Max Krasnyansky
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.820000] u32 classifier
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.820000] Performance counters on

System Log
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.830000] Actions configured
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.830000] Netfilter messages via NETLINK v0.30.
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.840000] nf_conntrack version 0.5.0 (960 buckets, 3840 max)
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.840000] nf_conntrack_rtsp v0.7 loading
Jan 1 00:00:10 DD-WRT kern.warn kernel: [ 0.850000] nf_nat_rtsp v0.7 loading
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.850000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.860000] TCP: westwood registered
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.860000] TCP: hybla registered
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.860000] TCP: vegas registered
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.870000] NET: Registered protocol family 17
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.870000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 0.890000] Bridge firewalling registered
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.890000] 8021q: 802.1Q VLAN Support v1.8
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.890000] searching for nvram
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.900000] nvram size = 0
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.950000] Atheros AR71xx hardware watchdog driver version 0.1.0
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.950000] ar71xx-wdt: timeout=15 secs (max=107) ref freq=40000000
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.980000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 0.990000] Freeing unused kernel memory: 160K (802f8000 - 80320000)
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 3.390000] ar71xx-wdt: enabling watchdog timer
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 3.460000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 4.110000] libphy: ag71xx_mdio: probed
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 4.700000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 4.710000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 5.300000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 6.010000] eth1: link up (1000Mbps/Full duplex)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 6.080000] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 6.090000] Backport generated by backports.git backports-20160324-9-g0e38f5c
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 6.840000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 6.840000] ath: EEPROM regdomain: 0x0
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 6.840000] ath: EEPROM indicates default country code should be used
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 6.840000] ath: doing EEPROM country->regdmn map search
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 6.840000] ath: country maps to regdmn code: 0x3a
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 6.840000] ath: Country alpha2 being used: US
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 6.840000] ath: Regpair used: 0x3a
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 6.850000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.debug kernel: [ 6.860000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 6.870000] gpiochip_find_base: cannot find free range
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 6.880000] gpiochip_add: GPIOs -1..22 (ath9k-phy0) failed to register
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 6.880000] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=79
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 7.700000] eth0: link up (1000Mbps/Full duplex)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.080000] device br0 entered promiscuous mode
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.110000] eth1: link down
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.120000] eth1: link up (1000Mbps/Full duplex)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.140000] eth1: link down
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.150000] eth1: link up (1000Mbps/Full duplex)
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.160000] device eth1 entered promiscuous mode
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.160000] br0: port 1(eth1) entered forwarding state
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.170000] br0: port 1(eth1) entered forwarding state

System Log
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.180000] device br0 entered promiscuous mode
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.200000] device br0 left promiscuous mode
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.700000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.700000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 4 is up
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 9.710000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 5 is up
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 11.170000] br0: port 1(eth1) entered forwarding state
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 13.730000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 13.750000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 13.780000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 15.000000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 15.010000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 16.240000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 16.380000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 16.610000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 16.620000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 16.630000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 16.640000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 16.660000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 16.680000] device ath0 entered promiscuous mode
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 16.780000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.notice kernel: [ 16.970000] random: hostapd urandom read with 32 bits of entropy available
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 16.980000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 16.990000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.err kernel: [ 17.010000] Halt ACK timeout
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 17.020000] br0: port 2(ath0) entered forwarding state
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 17.030000] br0: port 2(ath0) entered forwarding state
Jan 1 00:00:10 DD-WRT user.info : dnsmasq : dnsmasq daemon successfully started
Jan 1 00:00:10 DD-WRT user.info : cron : cron daemon successfully started
Jan 1 00:00:10 DD-WRT cron.info cron[850]: (CRON) STARTUP (fork ok)
Jan 1 00:00:10 DD-WRT user.info : wland : WLAN daemon successfully started
Jan 1 00:00:10 DD-WRT kern.info kernel: [ 17.830000] device eth0 entered promiscuous mode
Jan 1 00:00:12 DD-WRT kern.info kernel: [ 19.030000] br0: port 2(ath0) entered forwarding state
Jan 1 00:00:12 DD-WRT daemon.warn openvpn[834]: Note: option tun-ipv6 is ignored because modern operating systems do not need special IPv6 tun handling anymore.
Jan 1 00:00:12 DD-WRT daemon.err openvpn[834]: Options error: Unrecognized option or missing or extra parameter(s) in [CMD-LINE]:1: down-pre (2.4_rc1)
Jan 1 00:00:12 DD-WRT daemon.warn openvpn[834]: Use --help for more information.
Jan 1 00:00:12 DD-WRT kern.warn kernel: [ 19.620000] ipt_TRIGGER: module license 'unspecified' taints kernel.
Jan 1 00:00:12 DD-WRT kern.warn kernel: [ 19.630000] Disabling lock debugging due to kernel taint
Jan 1 00:00:12 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Jan 1 00:00:12 DD-WRT user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Jan 1 00:00:12 DD-WRT user.info : vpn modules : nf_nat_proto_gre successfully loaded
Jan 1 00:00:12 DD-WRT user.info : vpn modules : nf_conntrack_pptp successfully loaded
Jan 1 00:00:12 DD-WRT user.info : vpn modules : nf_nat_pptp successfully loaded
Jan 1 00:00:13 DD-WRT kern.info kernel: [ 20.430000] eth0: link down
Jan 1 00:00:13 DD-WRT kern.info kernel: [ 20.440000] device eth0 left promiscuous mode
Jan 1 00:00:13 DD-WRT user.info : ttraff : traffic counter daemon successfully started
Jan 1 00:00:13 DD-WRT user.info : klogd : kernel log daemon successfully stopped
Jan 1 00:00:13 DD-WRT kern.notice kernel: klogd: exiting
Jan 1 00:00:13 DD-WRT user.info : resetbutton : resetbutton daemon successfully stopped
Jan 1 00:00:13 DD-WRT user.info : syslogd : syslog daemon successfully stopped

System Log
Jan 1 01:00:14 DD-WRT syslog.info syslogd started: BusyBox v1.24.2
Jan 1 00:00:14 DD-WRT kern.notice kernel: klogd started: BusyBox v1.24.2 (2016-12-15 06:31:45 CET)
Jan 1 00:00:14 DD-WRT user.info : resetbutton : resetbutton daemon successfully started
Jan 1 00:00:14 DD-WRT kern.info kernel: [ 21.750000] eth0: link up (1000Mbps/Full duplex)
Jan 1 00:00:15 DD-WRT kern.info kernel: [ 22.770000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Jan 1 00:00:18 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Jan 1 00:00:18 DD-WRT user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Jan 1 00:00:18 DD-WRT user.info : vpn modules : nf_nat_proto_gre successfully loaded
Jan 1 00:00:18 DD-WRT user.info : vpn modules : nf_conntrack_pptp successfully loaded
Jan 1 00:00:18 DD-WRT user.info : vpn modules : nf_nat_pptp successfully loaded
Jan 1 00:00:18 DD-WRT user.info : process_monitor successfully started
Jan 1 00:00:18 DD-WRT user.info : wland : WLAN daemon successfully stopped
Jan 1 00:00:18 DD-WRT user.info : wland : WLAN daemon successfully started
May 25 12:31:55 DD-WRT user.info : WAN is up. IP: 192.168.1.28
May 25 12:31:55 DD-WRT user.info : openvpn : OpenVPN daemon (Client) starting/restarting...
May 25 12:31:55 DD-WRT user.info : cron : cron daemon successfully stopped
May 25 12:31:55 DD-WRT daemon.warn openvpn[1567]: Note: option tun-ipv6 is ignored because modern operating systems do not need special IPv6 tun handling anymore.
May 25 12:31:55 DD-WRT daemon.err openvpn[1567]: Options error: Unrecognized option or missing or extra parameter(s) in [CMD-LINE]:1: down-pre (2.4_rc1)
May 25 12:31:55 DD-WRT daemon.warn openvpn[1567]: Use --help for more information.
May 25 12:31:56 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
May 25 12:31:56 DD-WRT user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
May 25 12:31:56 DD-WRT user.info : vpn modules : nf_nat_proto_gre successfully loaded
May 25 12:31:56 DD-WRT user.info : vpn modules : nf_conntrack_pptp successfully loaded
May 25 12:31:56 DD-WRT user.info : vpn modules : nf_nat_pptp successfully loaded
May 25 12:31:56 DD-WRT daemon.debug process_monitor[1561]: Restarting cron (time sync change)
May 25 12:31:56 DD-WRT daemon.debug process_monitor[1561]: We need to re-update after 3600 seconds
May 25 12:31:56 DD-WRT daemon.info process_monitor[1561]: set timer: 3600 seconds, callback: ntp_main()
May 25 12:31:56 DD-WRT kern.notice kernel: [ 27.000000] random: nonblocking pool is initialized
May 25 12:31:56 DD-WRT user.info : cron : cron daemon successfully started
May 25 12:31:56 DD-WRT cron.info cron[1942]: (CRON) STARTUP (fork ok)
May 25 12:31:56 DD-WRT user.info : process_monitor : Process Monitor successfully stopped
May 25 12:31:56 DD-WRT user.info : process_monitor successfully started
May 25 12:31:56 DD-WRT user.info : wland : WLAN daemon successfully stopped
May 25 12:31:56 DD-WRT daemon.debug process_monitor[1986]: We need to re-update after 3600 seconds
May 25 12:31:56 DD-WRT daemon.info process_monitor[1986]: set timer: 3600 seconds, callback: ntp_main()
May 25 12:31:56 DD-WRT user.info : wland : WLAN daemon successfully started
May 25 12:31:56 DD-WRT user.info : WAN is up. IP: 192.168.1.28
May 25 12:31:56 DD-WRT user.info : openvpn : OpenVPN daemon (Client) starting/restarting...
May 25 12:31:56 DD-WRT daemon.warn openvpn[1991]: Note: option tun-ipv6 is ignored because modern operating systems do not need special IPv6 tun handling anymore.
May 25 12:31:56 DD-WRT daemon.err openvpn[1991]: Options error: Unrecognized option or missing or extra parameter(s) in [CMD-LINE]:1: down-pre (2.4_rc1)
May 25 12:31:56 DD-WRT daemon.warn openvpn[1991]: Use --help for more information.
May 25 12:32:05 DD-WRT user.debug : ttraff: data collection started
May 25 12:36:28 DD-WRT daemon.info hostapd: ath0: STA 48:2c:a0:68:9c:6b IEEE 802.11: authenticated
May 25 12:36:28 DD-WRT daemon.info hostapd: ath0: STA 48:2c:a0:68:9c:6b IEEE 802.11: associated (aid 1)
May 25 12:36:28 DD-WRT daemon.info hostapd: ath0: STA 48:2c:a0:68:9c:6b RADIUS: starting accounting session 00000009-00000000
May 25 12:36:28 DD-WRT daemon.info hostapd: ath0: STA 48:2c:a0:68:9c:6b WPA: pairwise key handshake completed (WPA)
May 25 12:36:28 DD-WRT daemon.info hostapd: ath0: STA 48:2c:a0:68:9c:6b WPA: group key handshake completed (WPA)
spikey1973
DD-WRT Novice


Joined: 20 Feb 2017
Posts: 35

PostPosted: Sat May 25, 2019 12:46    Post subject: Reply with quote
i hope that is infromative.
spikey1973
DD-WRT Novice


Joined: 20 Feb 2017
Posts: 35

PostPosted: Sat May 25, 2019 13:29    Post subject: Reply with quote
yea it has been ran from the router itself.

the problem is that the vpn is "not" working, my ip (the ip's behind the router are)is the ip of my service provider, not the ip of my vpn. which is kinda the idea of a VPN.

kind greats

Matt
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum