Posted: Sat Feb 03, 2018 6:51 Post subject: D-Link DIR895L AC5300 - FW r34777 - WORKS
Just wanted to confirm, DIR-895L Works with FW r34777
All LAN and WAN port Accessible
All Wireless Radio (2,4Ghz-5GHz-5GHz) Accessible.
Haven't tried the usb yet.
You need to donwgrade it first to 1.13b before flashing it to DD-WRT.
Flashing Tutorial for D-link DIR-XXX Router
http://forums.dlink.com/index.php?topic=72749.0
Credit to FurryNutz @ D-Link Forum
Thank You
Hope it'll help for those with same router
Posted: Thu Apr 26, 2018 13:04 Post subject: Re: D-Link DIR895L AC5300 - FW r34777 - WORKS
Hi,
So what is your experience with DDWRT and this router. Just got mine and am wondering what FW to use?
swordfishx wrote:
Just wanted to confirm, DIR-895L Works with FW r34777
All LAN and WAN port Accessible
All Wireless Radio (2,4Ghz-5GHz-5GHz) Accessible.
Haven't tried the usb yet.
You need to donwgrade it first to 1.13b before flashing it to DD-WRT.
Flashing Tutorial for D-link DIR-XXX Router
http://forums.dlink.com/index.php?topic=72749.0
Credit to FurryNutz @ D-Link Forum
Thank You
Hope it'll help for those with same router
Posted: Sun Jun 24, 2018 17:31 Post subject: DIR-895L troubles...
Need some help here.. Just updated my DIR-895L to the latest DD-WRT and all is fine, except I keep getting the popup text below and once I reboot my router, my UID/PWD combination is not valid anymore. Does anyone have any thoughts on this?
Popup Text:
Invalid Key, must be between 8 and 63 ASCII characters or 64 hexadecimal digits
Using: Firmware: DD-WRT v3.0-r36168 (06/20/1. I may try and roll back to an older version.
figured out the issue, you cannot use chrome. I used Edge and it worked fine. Now new issue is performance. Some of the wireless bands are not performing well and have a TON of TX packet errors.. like 10x of thousands. So you are getting a choppy connection across all bands.
Posted: Thu Aug 08, 2019 21:27 Post subject: Re: D-Link DIR895L AC5300 - FW r34777 - WORKS
swordfishx wrote:
Just wanted to confirm, DIR-895L Works with FW r34777
All LAN and WAN port Accessible
All Wireless Radio (2,4Ghz-5GHz-5GHz) Accessible.
Haven't tried the usb yet.
You need to donwgrade it first to 1.13b before flashing it to DD-WRT.
Flashing Tutorial for D-link DIR-XXX Router
http://forums.dlink.com/index.php?topic=72749.0
Credit to FurryNutz @ D-Link Forum
Thank You
Hope it'll help for those with same router
Do you mind make a copy of your cfe.bin bootloader and share with me? I bricked my router, desperately need to find a match bootloader to jtag. Thanks in advance.
Posted: Fri Mar 19, 2021 6:06 Post subject: Re: D-Link DIR895L AC5300 - FW r34777 - WORKS
swordfishx wrote:
Just wanted to confirm, DIR-895L Works with FW r34777
All LAN and WAN port Accessible
All Wireless Radio (2,4Ghz-5GHz-5GHz) Accessible.
Haven't tried the usb yet.
You need to donwgrade it first to 1.13b before flashing it to DD-WRT.
Flashing Tutorial for D-link DIR-XXX Router
http://forums.dlink.com/index.php?topic=72749.0
Credit to FurryNutz @ D-Link Forum
Thank You
Hope it'll help for those with same router
It works with the hardware Rev A3 (DIR-895L-A3) too (only A1 is listed). It seems that revision A1 and A3 are similar enough to work the same.
Unlike what is said in that last link, I had to downgrade to D-Link firmware 1.13 (the firmware 1.20 would not allow me to switch to DD-WRT).
I got the firmware from D-Link Australia http://support.dlink.com.au/Download/download.aspx?product=DIR-895L&type=FirmwareRant: I don't understand why, in theses days of global economy, where equipment may be bought almost anywhere, the manufacturers maintain disconnected web sites, offering different range of products per country, with even different presentation per country.
After downgrading D-Link firmware to 1.13, I could load the factory-to-ddwrt and then the dir895-webflash firmwares.
Worth noting, after configuring the AP in such a way that I could not access it, I could use the emergency recovery to install back the D-link firmware 1.13 and start installing DD-WRT again.
. I may try and roll back to an older version.