Posted: Mon Jan 27, 2020 18:54 Post subject: New Build - R6700 unstable
I just flashed my brand new Netgear Nighthawk 6700v3 with dd-wrt.K3_6700V3.chk. It all seemed to go well. I configured the router as a client bridge and got everything connected. On initial reboot, everything works as designed. I can ping all devices and reach the internet. Then things slowly start to deteriorate. I will be able to ping the router but the gui fails. Then the internet through the router gets slow. And finally, I will no longer be able to ping the device. Telnet fails as well. Internet will continue to work but slowly. Once I reset the router the cycle starts all over again. Any suggestions? Thanks for the help!
Ok, which build number version of DD-WRT? Looks like you maybe flashed a Kong build? Kinda lost over here. Also, CB and RB (and even Repeater) may not even work on ARM devices. I know Client mode does without a doubt on my R7000P running 40270M kongac.
Thank you for the response! I flashed it with build DD-WRT v3.0-r39960M kongac (06/08/19)
It is the Kong version. Think I should try another build?
Joined: 18 Mar 2014 Posts: 6360 Location: Netherlands
Posted: Wed Jan 29, 2020 8:51 Post subject:
^^^^^ There we go. Sorry, I didn't think to pull up your profile and copy and paste the link, egc
Also, FWIW, BS 42132 posted today, so if you felt up to migrating, there is that option as well. My R7000P is used semi-infrequently for my PC workbench these days, so it still has 40270M which works well for my purposes.