netgear R6400v2 - official?

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... 12, 13, 14, 15, 16, 17  Next
Author Message
deslatha
DD-WRT User


Joined: 12 Jul 2016
Posts: 190

PostPosted: Wed Aug 22, 2018 13:10    Post subject: Reply with quote
UnclePino wrote:
Hi all, I also have a R6400v2 and I am more than happy to help as much as I can. In attachment the output of "nvram show" and dmesg commands.

You should contribute a router to Kong and let him build a BS fw better. while on waiting you able to porting r6400vx to r7000 not r7000P. just retore r6400vx to OEM firmware,from that point you need copy and back up nvram and factory mtd.When you look at wikidev on both model v1 and v2. little different is cpu and flash ic but both are arm cortex. also on log nand should be 0x0800.0000 in hex or 128MiB but it is
nand: AMD/Spansion NAND 128MiB 3,3V 8-bit
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Spare area=64 eccbytes 56, ecc bytes located at:
2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Available 7 bytes at (off,len):
(1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
Scanning device for bad blocks
Options: NO_SUBPAGE_WRITE,
Creating 1 MTD partitions on "brcmnand":
0x000007280000-0x000107000000 : "ddwrt"
or 500 MiB.
all you need replace xvotex r7000 cfe. if you want down grade to r6300v2 then change board rev and type for compatible with fw of r6300v2. also you can able upgrade to r7000 not r7000p by same way. If board data from cfe not math then fw may going boot loop.You can not used both fw ,only down grade or upgrade until Kong fix and release new build one.
note:use at your own risk.
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7209
Location: Texas, USA

PostPosted: Wed Aug 22, 2018 13:16    Post subject: Reply with quote
deslatha wrote:
You should contribute a router to Kong and let him build a BS fw better.


You must've just completely skipped over the last few posts. I'm pretty sure there's a donation in the process Cool
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6219
Location: Netherlands

PostPosted: Wed Aug 22, 2018 13:19    Post subject: Reply with quote
Yes, first donation is received.

Keep up the good work.

We are getting there!!

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7209
Location: Texas, USA

PostPosted: Wed Aug 22, 2018 13:32    Post subject: Reply with quote
egc wrote:
Yes, first donation is received.

Keep up the good work.

We are getting there!!


I guess the price jumped, or there is shipping involved? 25 Euros added to goal... not surprised, since I know how much that device costs here locally. At least the original goal has been covered.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6219
Location: Netherlands

PostPosted: Wed Aug 22, 2018 13:40    Post subject: Reply with quote
Yes shipping costs Sad
_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
bigjohn
DD-WRT User


Joined: 08 Jun 2006
Posts: 123

PostPosted: Wed Aug 22, 2018 14:02    Post subject: Reply with quote
since I started this thread, contributed to sending the first one to BrainSlayer, and have a bricked router (probably all my fault, by the way - my board ID ends in 20...) - I just kicked in another 10 euro.
Cool

_________________
support DD-WRT and get great hosting!
Xeon2k8
DD-WRT Guru


Joined: 11 Feb 2016
Posts: 1281

PostPosted: Wed Aug 22, 2018 14:32    Post subject: Reply with quote
egc wrote:
Yes shipping costs Sad

115 why that much? Can't we just buy it online and directly send it to his home? I live in Germany if that helps of anything I can take care of some logistic.

_________________
R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS)
R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS)
R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS)
R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7209
Location: Texas, USA

PostPosted: Wed Aug 22, 2018 15:03    Post subject: Reply with quote
Xeon2k8 wrote:
egc wrote:
Yes shipping costs Sad

115 why that much? Can't we just buy it online and directly send it to his home? I live in Germany if that helps of anything I can take care of some logistic.


Verifying that it's in fact a V2 prior to shipment is probably ideal, I would think.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6219
Location: Netherlands

PostPosted: Wed Aug 22, 2018 15:09    Post subject: Reply with quote
Exactly must be sure that it is v2 and with the new board_id of U12H332T30_NETGEAR.

As we have now sufficient money to order one, I just did order one Smile.

Will get back about shipping but I am confident we will get there one way or the other.

I already informed Kong and I promised him a beer at the Munich oktoberfest (small one)

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Xeon2k8
DD-WRT Guru


Joined: 11 Feb 2016
Posts: 1281

PostPosted: Wed Aug 22, 2018 15:11    Post subject: Reply with quote
egc wrote:
Exactly must be sure that it is v2 and with the new board_id of U12H332T30_NETGEAR.

As we have now sufficient money to order one, I just did order one Smile.

Will get back about shipping but I am confident we will get there one way or the other.

I already informed Kong and I promised him a beer at the Munich oktoberfest (small one)

There is already enough money?? With only 2 contributions?

_________________
R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS)
R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS)
R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS)
R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6219
Location: Netherlands

PostPosted: Wed Aug 22, 2018 15:15    Post subject: Reply with quote
Yes, my next career will be fundraiser Smile

But we can/must still have some extra for shipping

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Xeon2k8
DD-WRT Guru


Joined: 11 Feb 2016
Posts: 1281

PostPosted: Wed Aug 22, 2018 15:52    Post subject: Reply with quote
egc wrote:
Yes, my next career will be fundraiser Smile

But we can/must still have some extra for shipping

How much extra? I will deposit right now

Edit: ah you don't know yet

_________________
R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS)
R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS)
R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS)
R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6219
Location: Netherlands

PostPosted: Thu Aug 23, 2018 7:45    Post subject: Reply with quote
R6400v2 with boardid of U12H332T30_NETGEAR has been sent to KONG Very Happy

Total cost including shipping E108, E 100 has already been donated, Thanks to John and David.

Thank you all for the support

We have to be a little patient as Kong is a busy man and it will take some time to sort out this boardid mess.

Oh and Kong works best when he can work in silence so do not bother him.

I have started on working on an install guide for the R6400v2 see: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399 contributions are welcome

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Xeon2k8
DD-WRT Guru


Joined: 11 Feb 2016
Posts: 1281

PostPosted: Thu Aug 23, 2018 9:26    Post subject: Reply with quote
egc wrote:
R6400v2 with boardid of U12H332T30_NETGEAR has been sent to KONG Very Happy

Total cost including shipping E108, E 100 has already been donated, Thanks to John and David.

Thank you all for the support

We have to be a little patient as Kong is a busy man and it will take some time to sort out this boardid mess.

Oh and Kong works best when he can work in silence so do not bother him.

I have started on working on an install guide for the R6400v2 see: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399 contributions are welcome

Done, buy yourself a beer Smile

_________________
R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS)
R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS)
R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS)
R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6219
Location: Netherlands

PostPosted: Thu Aug 23, 2018 9:49    Post subject: Reply with quote
Many thanks, I just saw your contribution and when I visit the Oktoberfest in Munchen I will buy one.

I will keep you all informed the packet has track and trace and should be delivered in 2 to 3 days.

Again many thanks to you all especially the ones who have contributed: (big)John, David and Xeon2K8.

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Goto page Previous  1, 2, 3 ... 12, 13, 14, 15, 16, 17  Next Display posts from previous:    Page 13 of 17
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum