WRT32X

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page Previous  1, 2, 3 ... 12, 13, 14, 15, 16  Next
Author Message
Latschenharry
DD-WRT Novice


Joined: 26 Apr 2018
Posts: 26
Location: Germany

PostPosted: Tue May 22, 2018 16:59    Post subject: Reply with quote
spuriousoffspring wrote:
What version of the Linksys Stock Venom Firmware are you on?
Do you have a WRT32X or a WRT32XB?

The current version for the WRT32X is: 1.0.180404.58


I got the normal Wrt32x with firmware: 1.0.180404.58
FLashing over serial also doesnt work :/

Venom>> setenv ipaddr 192.168.1.1
Venom>> setenv netmask 255.255.255.0
Venom>> setenv serverip 192.168.1.254
Venom>> run flash_alt_image
Using egiga0 device
TFTP from server 192.168.1.254; our IP address is 192.168.1.1
Filename 'venom.img'.
Load address: 0x2000000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
Venom>>
Sponsor
spuriousoffspring
DD-WRT Guru


Joined: 05 Apr 2017
Posts: 982
Location: South of Heaven, USA

PostPosted: Tue May 22, 2018 17:31    Post subject: Reply with quote
Before you flash double check TFTPD32 Server Interface. It sometimes automatically switches back to default 127.0.0.1 Software Loopback Interface.

Just re-select 192.168.1.254 from drop down menu.

_________________
DD-WRT Installation & Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117

WRT32X DD-WRT Installation Procedure
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=315569

IPVanish OpenVPN Client Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=308565

FIRMWARE: OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33)
MODEM: ARRIS SURFBoard SB8200
ROUTER: Linksys WRT32X
USB NAS: Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
Latschenharry
DD-WRT Novice


Joined: 26 Apr 2018
Posts: 26
Location: Germany

PostPosted: Tue May 22, 2018 17:57    Post subject: Reply with quote
spuriousoffspring wrote:
Before you flash double check TFTPD32 Server Interface. It sometimes automatically switches back to default 127.0.0.1 Software Loopback Interface.

Just re-select 192.168.1.254 from drop down menu.


Ok the Problem was my firewall, but still after the flash the router doesnt come up anymore.
spuriousoffspring
DD-WRT Guru


Joined: 05 Apr 2017
Posts: 982
Location: South of Heaven, USA

PostPosted: Tue May 22, 2018 18:06    Post subject: Reply with quote
Clear your browser history and reboot computer. Then go back to 192.168.1.1

What are the LEDs doing on WRT32X?

_________________
DD-WRT Installation & Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117

WRT32X DD-WRT Installation Procedure
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=315569

IPVanish OpenVPN Client Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=308565

FIRMWARE: OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33)
MODEM: ARRIS SURFBoard SB8200
ROUTER: Linksys WRT32X
USB NAS: Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
Latschenharry
DD-WRT Novice


Joined: 26 Apr 2018
Posts: 26
Location: Germany

PostPosted: Tue May 22, 2018 18:07    Post subject: Reply with quote
spuriousoffspring wrote:
Clear your browser history and reboot computer. Then go back to 192.168.1.1

i cant even ping the ip adress, so i dont think this changes anything
spuriousoffspring
DD-WRT Guru


Joined: 05 Apr 2017
Posts: 982
Location: South of Heaven, USA

PostPosted: Tue May 22, 2018 18:08    Post subject: Reply with quote
Latschenharry wrote:
spuriousoffspring wrote:
Clear your browser history and reboot computer. Then go back to 192.168.1.1

i cant even ping the ip adress, so i dont think this changes anything


Can you get back to first partition with 3x power switch?

_________________
DD-WRT Installation & Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117

WRT32X DD-WRT Installation Procedure
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=315569

IPVanish OpenVPN Client Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=308565

FIRMWARE: OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33)
MODEM: ARRIS SURFBoard SB8200
ROUTER: Linksys WRT32X
USB NAS: Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
Latschenharry
DD-WRT Novice


Joined: 26 Apr 2018
Posts: 26
Location: Germany

PostPosted: Tue May 22, 2018 18:10    Post subject: Reply with quote
spuriousoffspring wrote:
Latschenharry wrote:
spuriousoffspring wrote:
Clear your browser history and reboot computer. Then go back to 192.168.1.1

i cant even ping the ip adress, so i dont think this changes anything


Can you get back to first partition with 3x power switch?


Yes switching back works
spuriousoffspring
DD-WRT Guru


Joined: 05 Apr 2017
Posts: 982
Location: South of Heaven, USA

PostPosted: Tue May 22, 2018 18:36    Post subject: Reply with quote
Keep an eye on this LEDE Forum discussion:
https://forum.lede-project.org/t/need-new-davidc502-thread/14499/28

The part of the discussion I'm referring to is about the 32 byte offset.

There was a patch applied to correct the problem with the firmware not recognizing both partitions. I don't know if was applied to the current build, but if it was that may be the problem.

@ghoffman & I both applied the patch after we had the firmware already installed.

Maybe a future build will work for you from Venom GUI. He's been fixing them pretty quickly so it shouldn't be too long of a wait.

_________________
DD-WRT Installation & Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117

WRT32X DD-WRT Installation Procedure
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=315569

IPVanish OpenVPN Client Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=308565

FIRMWARE: OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33)
MODEM: ARRIS SURFBoard SB8200
ROUTER: Linksys WRT32X
USB NAS: Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
ghoffman
DD-WRT User


Joined: 03 Jan 2010
Posts: 453

PostPosted: Wed May 23, 2018 1:00    Post subject: Reply with quote
spuriousoffspring wrote:
Keep an eye on this LEDE Forum discussion:
https://forum.lede-project.org/t/need-new-davidc502-thread/14499/28

The part of the discussion I'm referring to is about the 32 byte offset.

There was a patch applied to correct the problem with the firmware not recognizing both partitions. I don't know if was applied to the current build, but if it was that may be the problem.

@ghoffman & I both applied the patch after we had the firmware already installed.

Maybe a future build will work for you from Venom GUI. He's been fixing them pretty quickly so it shouldn't be too long of a wait.


the davidc builds up today are the same that i originally flashed via the factory web interface.
please note that i have a wrt32xb. this is the same as some wrt32x (the ones with spansion rom) but not the same as the original wrt32x or wrt3200acm.

the advanced-reboot patch was added to the lede/openwrt build git, but that was after the davidc build.
spuriousoffspring
DD-WRT Guru


Joined: 05 Apr 2017
Posts: 982
Location: South of Heaven, USA

PostPosted: Thu May 24, 2018 23:41    Post subject: Reply with quote
New LEDE / OpenWRT builds here:
https://downloads.openwrt.org/snapshots/targets/mvebu/cortexa9/

_________________
DD-WRT Installation & Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117

WRT32X DD-WRT Installation Procedure
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=315569

IPVanish OpenVPN Client Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=308565

FIRMWARE: OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33)
MODEM: ARRIS SURFBoard SB8200
ROUTER: Linksys WRT32X
USB NAS: Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
Latschenharry
DD-WRT Novice


Joined: 26 Apr 2018
Posts: 26
Location: Germany

PostPosted: Fri May 25, 2018 9:02    Post subject: Reply with quote
spuriousoffspring wrote:
New LEDE / OpenWRT builds here:
https://downloads.openwrt.org/snapshots/targets/mvebu/cortexa9/


Maybe i need to revert some settings before flashing, because on partition 2 i flashed the wrt3200acm image?

which commands should work?
spuriousoffspring
DD-WRT Guru


Joined: 05 Apr 2017
Posts: 982
Location: South of Heaven, USA

PostPosted: Fri May 25, 2018 9:08    Post subject: Reply with quote
Yes, definitely! I took the u-boot environment from my stock WRT32X and posted the commands a page or two back in this thread.
_________________
DD-WRT Installation & Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117

WRT32X DD-WRT Installation Procedure
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=315569

IPVanish OpenVPN Client Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=308565

FIRMWARE: OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33)
MODEM: ARRIS SURFBoard SB8200
ROUTER: Linksys WRT32X
USB NAS: Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
Latschenharry
DD-WRT Novice


Joined: 26 Apr 2018
Posts: 26
Location: Germany

PostPosted: Fri May 25, 2018 12:57    Post subject: Reply with quote
spuriousoffspring wrote:
Based off the U-BOOT Environment of the stock WRT32X these should be the correct commands to return a converted WRT32X back to stock:

setenv mtdparts=mtdparts=armada-nand:2048K(uboot)ro,128K(u_env),256K(s_env),256K@8064K( devinfo),123m@9m(firmware1),123m@132m(firmware2)

setenv nandboot=setenv bootargs console=ttyS0,115200 root=/dev/mtdblock6;nand read $def aultLoadAddr $priKernAddr $priKernSize; bootz $defaultLoadAddr

setenv altnandboot=setenv bootargs console=ttyS0,115200 root=/dev/mtdblock8 $mtdparts;n and read $defaultLoadAddr $altKernAddr $altKernSize; bootz $defaultLoadAddr

setenv firmwareName venom.img

setenv priKernAddr=0x0900000

setenv altKernAddr=0x8400000

setenv altFwSize=0x7B00000

setenv priFwSize=0x7B00000

setenv ipaddr 192.168.1.1

setenv serverip 192.168.1.254

setenv netmask 255.255.255.0

setenv bootdelay 3

setenv silent

saveenv

run update_both_images

reset


This commands dont really work.

These Commands are not allowed to have an = in between:

setenv priKernAddr=0x0900000

setenv altKernAddr=0x8400000

setenv altFwSize=0x7B00000

setenv priFwSize=0x7B00000

This one needs to have the first = removed:
setenv mtdparts=mtdparts=armada-nand:2048K(uboot)ro,128K(u_env),256K(s_env),256K@8064K( devinfo),123m@9m(firmware1),123m@132m(firmware2)


And this command leeds to a kernel_panic event:
setenv altnandboot=setenv bootargs console=ttyS0,115200 root=/dev/mtdblock8 $mtdparts;n and read $defaultLoadAddr $altKernAddr $altKernSize; bootz $defaultLoadAddr

i dont know how to revert my 2. partition :/
spuriousoffspring
DD-WRT Guru


Joined: 05 Apr 2017
Posts: 982
Location: South of Heaven, USA

PostPosted: Fri May 25, 2018 13:11    Post subject: Reply with quote
I took the commands that were used to convert a WRT32X to a WRT3200ACM and just reversed them with the variables from a stock WRT32X U-BOOT environment.

I'm sure someone with A LOT more knowledge than me will jump in soon.

You may want to try asking here:
https://forum.lede-project.org/t/wrt32x-sysupgrade-broken/14600/20

https://forum.lede-project.org/t/need-new-davidc502-thread/14499/9

_________________
DD-WRT Installation & Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117

WRT32X DD-WRT Installation Procedure
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=315569

IPVanish OpenVPN Client Setup TUTORIAL
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=308565

FIRMWARE: OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33)
MODEM: ARRIS SURFBoard SB8200
ROUTER: Linksys WRT32X
USB NAS: Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
Latschenharry
DD-WRT Novice


Joined: 26 Apr 2018
Posts: 26
Location: Germany

PostPosted: Fri May 25, 2018 13:24    Post subject: Reply with quote
I got it working.

I booted to partition one with the stock WRT32x firmware and the used ssh for these commands:

    mtd erase kernel2

    mtd -f write venom.img kernel2

    fw_setenv verify 'no'

    fw_setenv altnandboot 'setenv bootargs console=ttyS0,11520
    0 root=/dev/mtdblock8 $mtdparts;nand read $defaultLoadAddr $altKernAddr $altKern
    Size; bootz $defaultLoadAddr'

    fw_setenv boot_part 2

    reboot



The venom.img is the factory image of davids build
Goto page Previous  1, 2, 3 ... 12, 13, 14, 15, 16  Next Display posts from previous:    Page 13 of 16
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum