Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29440_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ Unofficial Kong's release repository : http://ddwrt-kong.clonevince.fr/
So I know there are issues with the KRACK vulnerability in router mode for Netgear broadcom devices, but if my understanding is correct, devices running as client ARE patched because they use the new wpa_supplicant, as for the routers, do we know if/when we will see a patch, or will they never see one?
Joined: 16 Nov 2015 Posts: 6437 Location: UK, London, just across the river..
Posted: Sat Nov 04, 2017 7:16 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r33675M kongac (11/03/17)
Kernel Version Linux 4.4.95 #472 SMP Fri Nov 3 23:27:37 CET 2017 armv7l
update: 33655>33675 via ddup
reset: no
status: operational
errors: none, still a bit laggy loading pages _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Posted: Sat Nov 04, 2017 7:55 Post subject: Bufferbloat
Yes a bit laggy but bufferbloat is ok
for me, one's of the best. _________________ Router name: Buffalo WZR-600DHP2 - ADSL modem: Draytek 2820Vn, BT Voyager 220V IAD
dd-wrt.v24-K3_AC_ARM_STD.bin or
dd-wrt.v24-K3_AC_ARM_STD_128K.bin
I need a 100% stable and reliable OpenVPN-Client running on the router. (Able to auto-reconnect on connection loss etc.) Can you tell me from your experience how the kong-ddwrt is doing here?
Posted: Sat Nov 04, 2017 11:49 Post subject: v3.0-r33675M 3-11-2017
Hello
Router: Asus RT-AC3200
Firmware: DD-WRT v3.0-r33675M kongac (11/03/17)
Kernel: Linux 4.4.95 #472 SMP Fri Nov 3 23:27:37 CET 2017 armv7l
Status: working
Reset: NO
Errors: NO
Based on the previous releases this one looks good.
The WI-fi 2.4ghz w/ wap2 is working much better.
I will now jump into advanced config`s like VPN and freeradius to know if they also are working.
Joined: 18 Mar 2014 Posts: 12885 Location: Netherlands
Posted: Sat Nov 04, 2017 11:53 Post subject:
Router Model: Netgear R6400
Firmware Version: DD-WRT v3.0-r33675M kongac (11/03/17)
Kernel Version: Linux 4.4.95 #472 SMP Fri Nov 3 23:27:37 CET 2017 armv7l
Upgraded: from DD-WRT v3.0-r33655M kongac (11/03/17)via ddup --flash-latest
Reset: No not this time
Status: Up and running for 4 hours, basic setup as AP, static leases, OpenVPN client ( on PIA) up and running, 2,4GHz, 5Ghz USB storage and DLNA working.
I have shuffled more than 40 GB through WIFI during 4 hours and everything is working and stable, no apparent disconnect. All wired and wireless clients can see each other. (In previous builds I had no problems either maybe because wireless were plain old intel NIC's?)
Errors: Yes, OpenVPN with Policy Based Routing does not forward HTTP(s) traffic to the PBR clients with SFE on see: http://svn.dd-wrt.com/ticket/5900.
The GUI sometimes does not respond and I have to manually refresh this was also the case in previous builds.
OK, I'll give them a shot. I need a stable working router
(in fact there are around 15 R7000 devices for branch offices) with working openvpn(client) and Wifi (WPA2-ENT Radius EAP-TLS Auth)
I'll flash one device and jump the testing-train.
Router: Netgear R8000 (MAIN+AP)
Firmware: DD-WRT v3.0-r33675M kongac (11/03/17)
Kernel: Linux 4.4.95 #472 SMP Fri Nov 3 23:27:37 CET 2017 armv7l
Previous: DD-WRT v3.0-r33630M kongac (11/01/17)
Status: Working so far, better than the previous version
Reset: No (ddup --flash-latest)
Errors: None so far - 8hrs ...
seems much better than the previous build where various devices had disconnects at times as well as DNS seemed to die over time or delay responses .. _________________ Netgear X6 R8000 - DD-WRT v3.0-r34320M kongac
Posted: Sat Nov 04, 2017 16:45 Post subject: Asus RT-AC68U
Router: Asus RT-AC68U (H/W Ver: A1)
Firmware: DD-WRT v3.0-r33675M kongac (11/03/17)
Previous: DD-WRT v3.0-r33655M kongac (11/03/17)
Kernel: Linux 4.4.95 #472 SMP Fri Nov 3 23:27:37 CET 2017 armv7l
Previous: Linux 4.4.95 #470 SMP Fri Nov 3 00:38:04 CET 2017 armv7l
Status: ok
Reset: no (ddup --flash-latest)
Errors: no
Uptime: 11:13
Router: R7000
Firmware: from 33655 Kong to 33675 Kong
Kernel: 4.4.95
Status: Not right
Something definitely seems wrong since 33525.
Privoxy is acting very strange, it's not snappy, it randomly slows down on requests. Some times it takes forever to load a page, but an F5 makes it load instantly. Another example, on pages with thumbnails grid, some thumbnails won't load, if you refresh different thumbnails won't load, even if they loaded fine on first try.
Also, after a random time some services hang and don't respond anymore, not all at once, only one service randomly stops and then I have to ssh in and stopservice/startservice. It happened with privoxy, dnsmasq, samba3 and ssh.
Today, after 12h uptime, router seemed to hang on several services at once, GUI was still responding, but other services including ssh and pppoe stopped. I run ps command though GUI and noticed those processes were missing.
What is strange that after reboot, router seems good, but after few hours those symptoms appears. Also, I checked memory consumption and there's plenty of free ram.
Posted: Sat Nov 04, 2017 18:39 Post subject: Better than the last 2 builds
Router Model Netgear R8000
Firmware Version DD-WRT v3.0-r33675M kongac (11/03/17)
Kernel Version Linux 4.4.95 #472 SMP Fri Nov 3 23:27:37 CET 2017 armv7l
Time: 14:35:35 up 51 min, load average: 0.11, 0.04, 0.00
Received (RX) 100% 50288 OK, 3 errors
Transmitted (TX) 100% 131373 OK, 489 errors
Wireless seems more stable. I have yet to have the cameras go down and lose connectivity.
There is still an issue at hand, where one of the cameras drops connectivity after being viewed live for 5 minutes or more. The camera stream just dies.
Wifi errors still exist, but I dont think they are of interest.
RDP connection is better, and it seems to maintain the connection, but performance wise, RDP was better on the October build.