New BS build available : DD-WRT v3.0-r33555 (10/20/17)

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6, 7  Next
Author Message
rnelson
DD-WRT Novice


Joined: 22 Oct 2017
Posts: 1

PostPosted: Sun Oct 22, 2017 18:03    Post subject: Reply with quote
Router/Version: Asus RT-AC88U
Firmware: DDD-WRT v3.0-r33555 std (10/20/17)
Flashed: asus_rt-ac88u-firmware.trx
Kernel: Linux 4.4.93 #2153 SMP Fri Oct 20 06:46:54 CEST 2017 armv7l
Previous: ASUS firmware
Mode/Status: AP
Reset: 30/30/30

new router, loaded firmware from ASUS mini-loader. 2.4/5GHz test good, DDNS to zoneEdit updated, port forwarding services working.
Sponsor
captincookie@gmail.com
DD-WRT Novice


Joined: 23 Oct 2017
Posts: 8

PostPosted: Mon Oct 23, 2017 6:40    Post subject: Reply with quote
Router: RT-AC68U
Firmware: DD-WRT v3.0-r33555 std (10/20/17)

Issue/Errors: changing overclock setting to 800 -> 600 crashed and sort of bricked the router.

Context : Upgraded to this version and it was working but I changed the over clock setting from 800 to 600, applied settings and the router shutdown and never came back up.

I managed to get to ASUS CFE(emergency recovery mode) but started flashing DDWRT but the power went out and now I cant get back to the CFE to reflash. Router keeps on rebooting for some reason. Can an interrupted flash screw with the CFE bootloader ?
Xeon2k8
DD-WRT Guru


Joined: 11 Feb 2016
Posts: 1288

PostPosted: Mon Oct 23, 2017 10:24    Post subject: Reply with quote
captincookie@gmail.com wrote:
Router: RT-AC68U
Firmware: DD-WRT v3.0-r33555 std (10/20/17)

Issue/Errors: changing overclock setting to 800 -> 600 crashed and sort of bricked the router.

Context : Upgraded to this version and it was working but I changed the over clock setting from 800 to 600, applied settings and the router shutdown and never came back up.

I managed to get to ASUS CFE(emergency recovery mode) but started flashing DDWRT but the power went out and now I cant get back to the CFE to reflash. Router keeps on rebooting for some reason. Can an interrupted flash screw with the CFE bootloader ?

The power went out while flashing??? Man I think that's the only way I know to brick an Asus.

_________________
R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS)
R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS)
R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS)
R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6868
Location: Romerike, Norway

PostPosted: Mon Oct 23, 2017 12:02    Post subject: Reply with quote
Press abd hold the button while you turn power on.
Not the reset button, but the other.
Sadguy
DD-WRT Novice


Joined: 23 Oct 2017
Posts: 7

PostPosted: Mon Oct 23, 2017 13:21    Post subject: Reply with quote
Router: TPLINK Archer C9 v3
Firmware: DD-WRT v3.0-r33555 std (10/20/17)
Kernel: Linux 4.4.93 #2150 SMP Fri Oct 20 06:34:34 CEST 2017 armv7l
Previous: DD-WRT v3.0-r33525 std (10/17/17)
Status: Working
Reset: No

System Log
...
Jan 1 00:00:11 DD-WRT kern.info kernel: brd: module loaded
Jan 1 00:00:11 DD-WRT kern.info kernel: loop: module loaded
Jan 1 00:00:11 DD-WRT kern.notice kernel: bcmsflash: squash filesystem found at block 34
Jan 1 00:00:11 DD-WRT kern.notice kernel: Creating 6 MTD partitions on "bcmsflash":
Jan 1 00:00:11 DD-WRT kern.notice kernel: 0x000000000000-0x000000080000 : "boot"
Jan 1 00:00:11 DD-WRT kern.notice kernel: 0x000000080000-0x000000ff0000 : "linux"
Jan 1 00:00:11 DD-WRT kern.notice kernel: 0x000000220000-0x000000e00000 : "rootfs"
Jan 1 00:00:11 DD-WRT kern.notice kernel: 0x000000e00000-0x000000ff0000 : "ddwrt"
Jan 1 00:00:11 DD-WRT kern.notice kernel: 0x000000ff0000-0x000001000000 : "nvram_cfe"
Jan 1 00:00:11 DD-WRT kern.notice kernel: 0x000000fe0000-0x000000ff0000 : "nvram"
Jan 1 00:00:11 DD-WRT kern.err kernel: nflash: found no supported devices
Jan 1 00:00:11 DD-WRT kern.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan 1 00:00:11 DD-WRT kern.info kernel: tun: (C) 1999-2004 Max Krasnyansky
Jan 1 00:00:11 DD-WRT kern.info kernel: PPP generic driver version 2.4.2
Jan 1 00:00:11 DD-WRT kern.info kernel: PPP BSD Compression module registered
Jan 1 00:00:11 DD-WRT kern.info kernel: PPP Deflate Compression module registered
Jan 1 00:00:11 DD-WRT kern.info kernel: PPP MPPE Compression module registered
Jan 1 00:00:11 DD-WRT kern.info kernel: NET: Registered protocol family 24
Jan 1 00:00:11 DD-WRT kern.info kernel: GACT probability NOT on
Jan 1 00:00:11 DD-WRT kern.info kernel: Mirror/redirect action on
Jan 1 00:00:11 DD-WRT kern.info kernel: Simple TC action Loaded
Jan 1 00:00:11 DD-WRT kern.info kernel: netem: version 1.3
Jan 1 00:00:11 DD-WRT kern.info kernel: u32 classifier
Jan 1 00:00:11 DD-WRT kern.info kernel: input device check on
Jan 1 00:00:11 DD-WRT kern.info kernel: Actions configured
Jan 1 00:00:11 DD-WRT kern.info kernel: Netfilter messages via NETLINK v0.30.
Jan 1 00:00:11 DD-WRT kern.info kernel: nf_conntrack version 0.5.0 (1941 buckets, 7764 max)
Jan 1 00:00:11 DD-WRT kern.warn kernel: nf_conntrack_rtsp v0.7 loading
Jan 1 00:00:11 DD-WRT kern.info kernel: xt_time: kernel timezone is -0000
Jan 1 00:00:11 DD-WRT kern.info kernel: ip_set: protocol 6
Jan 1 00:00:11 DD-WRT kern.info kernel: gre: GRE over IPv4 demultiplexor driver
Jan 1 00:00:11 DD-WRT kern.warn kernel: nf_nat_rtsp v0.7 loading
Jan 1 00:00:11 DD-WRT kern.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:11 DD-WRT kern.info kernel: NET: Registered protocol family 17
Jan 1 00:00:11 DD-WRT kern.info kernel: bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Jan 1 00:00:11 DD-WRT kern.notice kernel: Bridge firewalling registered
Jan 1 00:00:11 DD-WRT kern.info kernel: 8021q: 802.1Q VLAN Support v1.8
Jan 1 00:00:11 DD-WRT kern.notice kernel: Registering SWP/SWPB emulation handler
Jan 1 00:00:11 DD-WRT kern.emerg kernel: found cfe nvram
Jan 1 00:00:11 DD-WRT kern.info kernel: check if nvram copy is required CFE Size is 65536
Jan 1 00:00:11 DD-WRT kern.info kernel: nvram copy magic is 48534C46
Jan 1 00:00:11 DD-WRT kern.info kernel: max nvram space = 131072
Jan 1 00:00:11 DD-WRT kern.info kernel: read 65536 bytes to offset 0
Jan 1 00:00:11 DD-WRT kern.notice kernel: Key type encrypted registered
Jan 1 00:00:11 DD-WRT kern.info kernel: Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
Jan 1 00:00:11 DD-WRT kern.err kernel: brcmnand: found no supported devices
Jan 1 00:00:11 DD-WRT kern.info kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Jan 1 00:00:11 DD-WRT kern.info kernel: Freeing unused kernel memory: 348K
Jan 1 00:00:11 DD-WRT kern.warn kernel: et: module license 'Proprietary' taints kernel.
Jan 1 00:00:11 DD-WRT kern.warn kernel: Disabling lock debugging due to kernel taint
Jan 1 00:00:11 DD-WRT kern.warn kernel: et_module_init: passivemode set to 0x0
Jan 1 00:00:11 DD-WRT kern.warn kernel: et_module_init: txworkq set to 0x0
Jan 1 00:00:11 DD-WRT kern.warn kernel: et_module_init: et_txq_thresh set to 0x400
Jan 1 00:00:11 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Jan 1 00:00:11 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Jan 1 00:00:11 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Jan 1 00:00:11 DD-WRT kern.info kernel: ET Corerev 5
Jan 1 00:00:11 DD-WRT kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
Jan 1 00:00:11 DD-WRT kern.info kernel: roboswitch: Probing device 'eth0'
Jan 1 00:00:11 DD-WRT kern.info kernel: roboswitch: trying a 53012! at eth0
Jan 1 00:00:11 DD-WRT kern.info kernel: detected CPU Port is 5
Jan 1 00:00:11 DD-WRT kern.info kernel: roboswitch: found a 53012! at eth0
Jan 1 00:00:11 DD-WRT kern.info kernel: detected CPU Port is 5
Jan 1 00:00:11 DD-WRT kern.warn kernel: wl_module_init: passivemode set to 0x0
Jan 1 00:00:11 DD-WRT kern.warn kernel: wl_module_init: txworkq set to 0x0
Jan 1 00:00:11 DD-WRT kern.warn kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
Jan 1 00:00:11 DD-WRT kern.warn kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
Jan 1 00:00:11 DD-WRT kern.warn kernel: eth0: mixed HW and IP checksum settings.
Jan 1 00:00:11 DD-WRT kern.info kernel: device br0 entered promiscuous mode
Jan 1 00:00:11 DD-WRT kern.info kernel: device vlan1 entered promiscuous mode
Jan 1 00:00:11 DD-WRT kern.info kernel: device eth0 entered promiscuous mode
Jan 1 00:00:11 DD-WRT kern.info kernel: device eth1 entered promiscuous mode
...
captincookie@gmail.com
DD-WRT Novice


Joined: 23 Oct 2017
Posts: 8

PostPosted: Mon Oct 23, 2017 15:03    Post subject: Reply with quote
Per Yngve Berg wrote:
Press abd hold the button while you turn power on.
Not the reset button, but the other.

the wps button? I tried but it isn't letting me get into CFE recovery mode. If I leave the router on it will reboot every 30 seconds so I think its stuck in a boot loop

ASlso yeah, dont change clocksetting for this version of ddwrt is the main takeaway. I know this isnt a help thread but thanks.
droid-I
DD-WRT User


Joined: 10 Oct 2014
Posts: 101
Location: 60th parallel N.

PostPosted: Mon Oct 23, 2017 15:40    Post subject: Reply with quote
Router/Version: Linksys EA6900 v.1.1
Firmware: DD-WRT v3.0-r33555 std (10/20/17)

Previous: DD-WRT v3.0-r33529 std
Status: Working
Reset: yes

Upgraded via XvortexCFE, XVT CFE miniWebServer

_________________
EA6900 v3.0-r52217 std ░ WZR-HP-AG300H-DD-WRT v3.0-r52095 std ░ WHR3-G54 v3.0-r29193 mini ░ WLI-TX4-G54HP ░ WBMR-HP-GNV2 ░ TL-MR3420v²
Idi74
DD-WRT Novice


Joined: 17 Oct 2017
Posts: 4

PostPosted: Mon Oct 23, 2017 17:37    Post subject: Reply with quote
Router: Asus rt-n66u
Firmware: DD-WRT v3.0-r33555 big (previous r21625)
Status: Working great (main router)
Reset: No
Errors: None
c4os
DD-WRT Novice


Joined: 06 Jan 2010
Posts: 17

PostPosted: Mon Oct 23, 2017 17:55    Post subject: Reply with quote
Router: e4200
Firmware: DD-WRT v3.0-r33555 mega (previous 33006 mega)
Kernel: Linux 3.10.107 #16360 Fri Oct 20
Status: online, main router
Reset: 30/30/30
Errors: none so far
Uptime: 1 day, 5:42
wl1 5ghz: Received (RX) 631001 OK, 13 errors Transmitted (TX) 1435000 OK, 16 errors

all good for me
alienlovesecrets
DD-WRT Novice


Joined: 06 Oct 2017
Posts: 8

PostPosted: Mon Oct 23, 2017 18:01    Post subject: Linksys E3200 Reply with quote
Router/Version: Linksys E3200
Firmware: DD-WRT v3.0-r33555 mega (10/20/17)
Kernel: Linux 3.10.107 #16360 Fri Oct 20 11:07:53 CEST 2017 mips 2017
Previous: dd-wrt.v24-33215_NEWD-2_K3.x_mega-e3200.bin 25-Aug-2017 12:52
Mode/Status: Wireless Repeater,Bridge
Reset: No
Issues/Errors: None so far, update over GUI
mbze430
DD-WRT User


Joined: 14 May 2012
Posts: 239

PostPosted: Mon Oct 23, 2017 21:00    Post subject: Reply with quote
Router: Asus RT-AC66U A1
Firmware: DD-WRT v3.0-r33555 giga (10/20/17)
Previous: DD-WRT v3.0-r33525
Kernel: Linux 3.10.107 #16344 Fri Oct 20 10:51:44 CEST 2017 mips
Status: Gateway, working
Reset: No
Errors/Notes: still no 5ghz wifi after a restore factory reset

_________________
ASUS RT-AC3200 - Deployed Client's site
ASUS RT-AC5200 - Merlin
ASUS RT-AX88U - Merlin
danielwritesback
DD-WRT User


Joined: 29 Aug 2011
Posts: 240

PostPosted: Tue Oct 24, 2017 5:56    Post subject: WRT54G Reply with quote
EDIT: Sorry, I had posted before realizing that the Security update for Broadcom is scheduled for completion at 3357X.

Last edited by danielwritesback on Wed Oct 25, 2017 5:30; edited 4 times in total
ShanX
DD-WRT Novice


Joined: 18 Jul 2014
Posts: 16

PostPosted: Tue Oct 24, 2017 7:27    Post subject: Reply with quote
Router: ASUS RT-N12 D1
Firmware: DD-WRT v3.0-r33555 mega (10/20/17)
Kernel: Linux 3.10.107 #16360 Fri Oct 20 11:07:53 CEST 2017 mips
Status: WORKING
Reset: NO
Note: I am using it as a switch and AP.

It works very smooth. Wi-Fi signal and speed stable. Best firmware ever.


Keep up the work. Smile
Greetings from Hungary
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 314
Location: Bakersfield, CA

PostPosted: Tue Oct 24, 2017 17:00    Post subject: Reply with quote
Router: 2x Linksys E3000
Firmware: dd-wrt.v24-33555_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-33006_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.107 #16360 Fri Oct 20 11:07:53 CEST 2017 mips
Status: Working as client bridges.
Reset: No.
Errors: ntpclient doesn't work by default, hack fix below.

Router: Trendnet TEW811DRU
Firmware: DD-WRT v3.0-r33555 mini (10/20/17)
Previous: DD-WRT v3.0-r33006 mini (08/03/17)
Kernel: Linux 4.4.93 #2151 Fri Oct 20 06:38:42 CEST 2017 armv7l
Status: Working as a client bridge.
Reset: No.
Errors: ntpclient doesn't work by default, hack fix below.

Fixing the ntpclient issue at startup, the time is then shown correctly in the top right corner. Enter this into the startup script:
Code:

# Set the ntpclient (hack fix)
while true; do
  sleep 2
  ntpclient 0.us.pool.ntp.org
  break;
done &

_________________

Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
adasch
DD-WRT User


Joined: 02 Jan 2015
Posts: 69
Location: Gdansk, Poland

PostPosted: Tue Oct 24, 2017 19:17    Post subject: Reply with quote
Router: WRT600N
Firmware: DD-WRT v3.0-r33555 mega-special (10/20/17)
Kernel: Linux 2.4.37 #47031 Fri Oct 20 05:26:17 CEST 2017 mips
Status: working
Reset: no
Errors: probably not, but few previous versions drop wan/lan connections (router reset helps)
Goto page Previous  1, 2, 3, 4, 5, 6, 7  Next Display posts from previous:    Page 4 of 7
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum