New BS build available : DD-WRT v3.0-r33555 (10/20/17)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4, 5, 6, 7  Next
Author Message
labo
DD-WRT Guru


Joined: 30 Jan 2015
Posts: 675
Location: Texas, USA

PostPosted: Fri Oct 20, 2017 14:23    Post subject: New BS build available : DD-WRT v3.0-r33555 (10/20/17) Reply with quote
DD-WRT build Firmware: DD-WRT v3.0-r33555 std (10/20/17) has been released:

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2017/10-20-2017-r33555/

Changelog:
https://www.dd-wrt.com/phpBB2/viewtopic.php?t=279467
http://svn.dd-wrt.com/timeline


Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:

Disclaimer:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 33525_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless.
If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
ASUS RT-AX89X: Main gateway.
QNAP QSW-1208-8C 12-Port 10GbE Switch
Nighthawk SX10 10GbE Switch
1 X RAX120 WAP Bridge
1 X RAX75 WAP Bridge
Archer AX11000 WAP Bridge
2 X R7800 DD-WRT Mesh
2 X R9000 DD-WRT Mesh


Last edited by labo on Fri Oct 20, 2017 15:20; edited 2 times in total
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5314
Location: Texas

PostPosted: Fri Oct 20, 2017 14:24    Post subject: Reply with quote
E2500
DD-WRT v3.0-r33555 mega (10/20/17)
Linux 3.10.107 #16360 Fri Oct 20 11:07:53 CEST 2017 mips
[dd-wrt.v24-33555_NEWD-2_K3.x_mega.bin]
No Reset - previous r33215M
working -- seems ok
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 691
Location: Hung Hom, Hong Kong

PostPosted: Fri Oct 20, 2017 14:39    Post subject: Re: New BS build available : DD-WRT v3.0-r33555 (10/20/17) Reply with quote
labo wrote:
DD-WRT build Firmware: DD-WRT v3.0-r33555 std (10/20/17) has been released:

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2017/10-20-2017-r33555/

Changelog
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=279466
http://svn.dd-wrt.com/timeline


My bad .... how could I see all change-sets between 33525 and 33555? "http://svn.dd-wrt.com/changeset/33555" only shows change-set 33555.

Again, my bad...
The first post in "http://www.dd-wrt.com/phpBB2/viewtopic.php?t=279466" again has no news about 33555 but just "30805 --- 2016/10/27". You have to jump to the last few messages to see something about 33555. But the dates of that post was "Sat Oct 29, 2016"! It seemed that the post had been edited multiple times.

If that's the case, why not update the first, pinned post in that thread?

_________________
Router: Asus RT-N18U (rev. A1)

May the Force and farces be with you! Live long and proper!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832


Last edited by mwchang on Fri Oct 20, 2017 15:02; edited 1 time in total
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 691
Location: Hung Hom, Hong Kong

PostPosted: Fri Oct 20, 2017 14:53    Post subject: DD-WRT (BS) Build 33555 and Asus RT-N18U Reply with quote
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r33555 std (10/20/17)
Kernel: Linux 4.4.93 #2152 Fri Oct 20 06:41:05 CEST 2017 armv7l
Previous: DD-WRT v3.0-r33525 std (10/17/17)
Mode/Status: AP Working, Wireless working
Reset: NO reset during firmware upgrade
Issues/Errors: None (I don't use VPN nor USB)

1. LAN LED ... too lazy to check! Meow... >@.@<
2. DDNS function working normally and didn't crash like 31722
3. My router is NOT working 24/7

4. Kernel debugging messages logged when booting build 33555
Code:
System Log
Jan 1 08:00:17 RT-N18U syslog.info syslogd started: BusyBox v1.27.2
Jan 1 00:00:17 RT-N18U user.info : wland : WLAN daemon successfully started
Jan 1 00:00:17 RT-N18U kern.notice kernel: klogd started: BusyBox v1.27.2 (2017-10-20 06:42:03 CEST)
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:07.0: reg 0x10: [mem 0x18012000-0x18012fff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:07.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:08.0: [14e4:0501] type 00 class 0xffffff
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:08.0: reg 0x10: [mem 0x18013000-0x18013fff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:08.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:09.0: [14e4:0501] type 00 class 0xffffff
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:09.0: reg 0x10: [mem 0x18014000-0x18014fff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0a.0: [14e4:0510] type 00 class 0xffffff
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0a.0: reg 0x10: [mem 0x1800b000-0x1800bfff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0a.0: reg 0x14: [mem 0x1800c000-0x1800cfff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0b.0: [14e4:471a] type 00 class 0x0c0310
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0b.0: reg 0x10: [mem 0x18022000-0x18022fff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0b.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0b.1: [14e4:471a] type 00 class 0x0c0320
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0b.1: reg 0x10: [mem 0x18021000-0x18021fff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0b.1: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0c.0: [14e4:472a] type 00 class 0x0c0330
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0c.0: reg 0x10: [mem 0x18023000-0x18023fff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0c.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0d.0: [14e4:0503] type 00 class 0xffffff
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0d.0: reg 0x10: [mem 0x18020000-0x18020fff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0e.0: [14e4:0506] type 00 class 0xffffff
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0e.0: reg 0x10: [mem 0x18210000-0x1821ffff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0f.0: [14e4:0507] type 00 class 0xffffff
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0f.0: reg 0x10: [mem 0x18010000-0x18010fff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:0f.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:10.0: [14e4:0508] type 00 class 0xffffff
Jan 1 00:00:17 RT-N18U kern.info kernel: pci 0000:00:10.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:10.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:11.0: [14e4:0509] type 00 class 0xffffff
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:11.0: reg 0x10: [mem 0x18028000-0x18028fff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:11.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:12.0: [14e4:050a] type 00 class 0xffffff
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:12.0: reg 0x10: [mem 0x18029000-0x18029fff]
Jan 1 00:00:17 RT-N18U kern.debug kernel: pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
Jan 1 00:00:17 RT-N18U kern.warn kernel: PCI: Fixing up bus 0 domain 0
Jan 1 00:00:17 RT-N18U kern.info kernel: PCIE1 link=1
Jan 1 00:00:17 RT-N18U kern.info kernel: PCIE1 switching to GEN2
Jan 1 00:00:17 RT-N18U kern.info kernel: PCIE1 link=1
Jan 1 00:00:17 RT-N18U kern.info kernel: PCI host bridge to bus 0001:00
Jan 1 00:00:17 RT-N18U kern.info kernel: pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
Jan 1 00:00:17 RT-N18U kern.info kernel: pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]



speedof.me.asus.rt-n18u.dd-wrt.bs.33555.jpg
 Description:
Result of http://speedof.me/m using Asus RT-N18U and DD-WRT (BS) Build 33555
 Filesize:  10.43 KB
 Viewed:  18635 Time(s)

speedof.me.asus.rt-n18u.dd-wrt.bs.33555.jpg



_________________
Router: Asus RT-N18U (rev. A1)

May the Force and farces be with you! Live long and proper!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832


Last edited by mwchang on Fri Oct 20, 2017 14:58; edited 1 time in total
slobodan
DD-WRT Guru


Joined: 03 Nov 2011
Posts: 1551
Location: Zwolle

PostPosted: Fri Oct 20, 2017 14:58    Post subject: Reply with quote
E3000 and E4200 V1: working fine (don't know too much, since I only use them as switches/APs).
_________________
2 times RT-AC56U running 33772 with entware-ng, Yamon 3 (SFE disabled).

Asus RT-N16 running Merlin LTS fork RT-N16_3.0.0.4_374.43_2-25E8j9527.trx with entware-ng.

2 times Asus RT-N16 running dd-wrt.v24-33772_NEWD-2_K3.x_big.bin with entware-ng

E4200 V1 running dd-wrt.v24-33772_NEWD-2_K3.x_mega-e3000.bin

3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running dd-wrt.v24-33772_NEWD-2_K3.x_mega-e3000.bin (bridged with LAN cable)

slobodan
DD-WRT Guru


Joined: 03 Nov 2011
Posts: 1551
Location: Zwolle

PostPosted: Fri Oct 20, 2017 15:24    Post subject: Reply with quote
RT-AC56U: apparently ok, using as main router.
_________________
2 times RT-AC56U running 33772 with entware-ng, Yamon 3 (SFE disabled).

Asus RT-N16 running Merlin LTS fork RT-N16_3.0.0.4_374.43_2-25E8j9527.trx with entware-ng.

2 times Asus RT-N16 running dd-wrt.v24-33772_NEWD-2_K3.x_big.bin with entware-ng

E4200 V1 running dd-wrt.v24-33772_NEWD-2_K3.x_mega-e3000.bin

3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running dd-wrt.v24-33772_NEWD-2_K3.x_mega-e3000.bin (bridged with LAN cable)

wicket
DD-WRT Novice


Joined: 18 Jul 2017
Posts: 41
Location: Wisconsin, USA

PostPosted: Fri Oct 20, 2017 16:22    Post subject: Reply with quote
Router/Version: Linksys EA6500 v1
Firmware: DD-WRT v3.0-r33555 giga (10/20/17)
Kernel: Linux 3.10.107 #16344 Fri Oct 20 10:51:44 CEST 2017 mips
Previous: DD-WRT v3.0-r33525 giga (10/17/17)
Mode/Status: Gateway/AP
Reset: NO
Issues/Errors: None so far
peteroh
DD-WRT Novice


Joined: 03 Apr 2011
Posts: 7

PostPosted: Fri Oct 20, 2017 16:30    Post subject: Reply with quote
System
=====
Router Model : Asus RT-N18U
Firmware Version : DD-WRT v3.0-r33555 std (10/20/17)
Kernel Version : Linux 4.4.93 #2152 Fri Oct 20 06:41:05 CEST 2017 armv7l
Mode : Repeater Bridge with single Virtual Interface with NG-Mixed network
Status : So far working fine
Reset : None
Errors : DDNS & NTP daemon not auto start

System Log
========
Jan 1 08:00:12 Asus RT-N18U syslog.info syslogd started: BusyBox v1.27.2
Jan 1 00:00:12 Asus RT-N18U user.info : telnetd : telnet daemon successfully started
Jan 1 00:00:13 Asus RT-N18U user.info : wland : WLAN daemon successfully started
Jan 1 00:00:13 Asus RT-N18U user.info : VNCRepeater : repeater successfully started
Jan 1 00:00:13 Asus RT-N18U user.info : interface added successfully
Jan 1 00:00:13 Asus RT-N18U lpr.err p9100d[882]: socket: Address family not supported by protocol
Jan 1 00:00:13 Asus RT-N18U user.info : cron : cron daemon successfully started
Jan 1 00:00:13 Asus RT-N18U cron.info cron[909]: (CRON) STARTUP (fork ok)
Jan 1 00:00:13 Asus RT-N18U user.info : dropbear : ssh daemon successfully started
Jan 1 00:00:13 Asus RT-N18U authpriv.info dropbear[917]: Running in background
Jan 1 00:00:14 Asus RT-N18U user.info : vpn modules : vpn modules successfully unloaded
Jan 1 00:00:14 Asus RT-N18U user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Jan 1 00:00:14 Asus RT-N18U user.info : dnsmasq : dnsmasq daemon successfully started
Jan 1 00:00:14 Asus RT-N18U user.info : vpn modules : nf_nat_proto_gre successfully loaded
Jan 1 00:00:14 Asus RT-N18U user.info : vpn modules : nf_conntrack_pptp successfully loaded
Jan 1 00:00:15 Asus RT-N18U user.info : vpn modules : nf_nat_pptp successfully loaded
Jan 1 00:00:16 Asus RT-N18U user.info : httpd : https daemon successfully started
Jan 1 00:00:20 Asus RT-N18U user.info : NAS : NAS lan (wl0.1 interface) successfully started
Jan 1 00:00:20 Asus RT-N18U user.info : syslogd : syslog daemon successfully stopped
Jan 1 08:00:20 Asus RT-N18U syslog.info syslogd exiting
Jan 1 08:00:20 Asus RT-N18U syslog.info syslogd started: BusyBox v1.27.2
Jan 1 00:00:20 Asus RT-N18U user.info : httpd : http daemon successfully stopped
Jan 1 00:00:21 Asus RT-N18U user.info : httpd : https daemon successfully started
Jan 1 00:00:21 Asus RT-N18U user.info : resetbutton : resetbutton daemon successfully stopped
Jan 1 00:00:21 Asus RT-N18U user.info : resetbutton : resetbutton daemon successfully started

### Below log auto started by script for NTP & DDNS under "Administration" -> "Commands" -> "Startup" ###
ntpclient asia.pool.ntp.org
startservice process_monitor
startservice ddns

Jan 1 00:00:27 Asus RT-N18U user.info : process_monitor successfully started
Jan 1 00:00:27 Asus RT-N18U user.info : DDNS : inadyn daemon successfully started
Jan 1 00:00:28 Asus RT-N18U user.info : nas : NAS daemon successfully stopped
Jan 1 00:00:28 Asus RT-N18U user.info : NAS : NAS lan (wl0.1 interface) successfully started
Jan 1 00:00:32 Asus RT-N18U daemon.err process_monitor[1228]: Last update failed, we need to re-update after 30 seconds
Jan 1 00:00:32 Asus RT-N18U daemon.debug process_monitor[1228]: We need to re-update after 3600 seconds
Jan 1 00:00:32 Asus RT-N18U daemon.info process_monitor[1228]: set timer: 3600 seconds, callback: ntp_main()


DDNS Status
=========
Thu Jan 1 08:00:27 1970: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.
Thu Jan 1 08:00:27 1970: INADYN: IP read from cache file is 'XXX.XXX.XXX.XXX'. No update required.
Thu Jan 1 08:00:32 1970: INADYN:IP: Error '0x16' resolving host name 'checkip.dyndns.org'
Thu Jan 1 08:00:32 1970: W: DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
Thu Jan 1 08:00:32 1970: W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 0)

### Used Custom DDNS for DNS-O-Matic but look like it process wrongly on DynDNS ###
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2576
Location: Indy

PostPosted: Fri Oct 20, 2017 17:23    Post subject: Reply with quote
Router/Version: Linksys E1500
Firmware: DD-WRT v3.0-r33555 mega (10/20/17)
Kernel: Linux 3.10.107 mips (LEDE GCC 6.3.0 r3143-e982c4b) ) #16360 Fri Oct 20 11:07:53 CEST 2017
Previous: 33525 k3.10.107
Mode/Status: AP
Reset: No
Issues/Errors: No issues, up for 30min.

Thanks to redhawk for talking to BS about the k3x size issue!

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 20.7.1|FT2020.5: EA6900v1.1@1GHz, F7D8302@532|DD 44294: DIR-810L, WNDR4500v2 & 4000@533,
R6300v1, RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT 19.7.3: RT-ACRH13, R6220, WNDR3700v4
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1577
Location: Canada

PostPosted: Fri Oct 20, 2017 17:43    Post subject: Reply with quote
Router: Family E3000
Firmware: DD-WRT v3.0-r33555 mega (10/20/17)
Kernel: Linux 3.10.107 #16360 Fri Oct 20 11:07:53 CEST 2017 mips
Previous: DD-WRT v3.0-r33006 mega (08/03/17)
Status: Working, only issue is USB LED is off when in use.
Reset: No
Errors: No
Uptime: +1 hours

Services Enabled or Disabled from Default:
-Disabled SFE
-NTP Client with blank IP/Name
-2nd network on vlan3 & eth1
-IPv6 with HE Tunnelbroker for 2 networks
-DDNS via OpenDNS
-2x DNSCrypt-Proxy Servers via Entware-ng
-SSH via WAN with custom port
-Syslog
-Disabled WAN Traffic Counter
-USB Storage Only, set mount point as /opt
-Scandisk USB3.0 UltraFit 32GB - NTFS (for symlink support)
-Cron Job with custom script
-TCP Congestion Control - Vegas
-Max Ports - 16384
-TCP Timeout - 600
-Custom Startup, Shutdown & Firewall
-Entware-ng (loaded: curl, dnscrypt-proxy & ip-legacy)
-YAMon3

WAN Speed Tests Throughput:
Laptop HP 6730b on Ubuntu 16.04LTS
Ethernet: 70Mbps
WL1 HT40Mhz: 50Mbps
WL0 20Mhz: 20Mbps

_________________
Home Network on Telus PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r44406 Std
R7000 - Wired ISP 4K IPTV Gateway - DDWRT r44406 Std

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r44406 Std
WRT610Nv1 - Client Bridge - DDWRT r33679 Mega K2.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r44406 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 381

PostPosted: Fri Oct 20, 2017 17:55    Post subject: Reply with quote
Router/Version: Buffalo WZR-1750DHP & DHPD
Firmware: DD-WRT v3.0-r33555 std (10/20/17)
Kernel: Linux 4.4.93 #2148 SMP Thu Oct 19 09:17:43 CEST 2017 armv7l
Previous: BS r33525
Mode/Status: Gateway/Working
Reset: yes via the webGUI
Issues/Errors: None so far

Working without any issues so far. Overclocking is still not active anymore on this BS version but my OC from previous builds is not being reset to default.

EDIT:
I DLed my version from ftp://ftp.dd-wrt.com/betas/2017/10-20-2017-r33555/ and not the link provided by OP(original poster) but i suspect it is the same thing.
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2576
Location: Indy

PostPosted: Fri Oct 20, 2017 18:30    Post subject: Reply with quote
Brimmy wrote:
Overclocking is still not active anymore on this BS version but my OC from previous builds is not being reset to default.
I recall the problem is when the nvram parameter 'overclocking' is set, DD tries to reset to it after reboot, as I had issues when initially testing my E1500 (DD didn't provide several valid OC settings, so I had to custom-set 'clkfreq=353,176,88'). Once I changed 'overclocking=353', no more problems, but I think it being blank is also fine (thus a reset fixes DD from changes it after boot).

Router/Version: Netgear WNDR4500v2
Firmware: DD-WRT v3.0-r33555 mega (10/20/17)
Kernel: Linux 3.10.107 mips (LEDE GCC 6.3.0 r3143-e982c4b) #16344 Fri Oct 20 10:51:44 CEST 2017
Previous: 33492 k3.10
Mode/Status: 2.4 GHz CB + 5 GHz AP
Reset: No
Issues/Errors: Up 20min, no issues except time showed as not set, until I ran:
    ntpclient us.pool.ntp.org

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 20.7.1|FT2020.5: EA6900v1.1@1GHz, F7D8302@532|DD 44294: DIR-810L, WNDR4500v2 & 4000@533,
R6300v1, RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT 19.7.3: RT-ACRH13, R6220, WNDR3700v4


Last edited by jwh7 on Fri Oct 20, 2017 18:34; edited 1 time in total
mr3
DD-WRT Novice


Joined: 18 Oct 2017
Posts: 4

PostPosted: Fri Oct 20, 2017 18:33    Post subject: Reply with quote
Router: Linksys E3000 (BCM4716 rev 1)
Firmware: DD-WRT v3.0-r33555 mega (10/20/17)
Previous: DD-WRT v3.0-r33525 mini (10/17/17)
Kernel: Linux 3.10.107 #16360 Fri Oct 20 11:07:53 CEST 2017 mips
(previous kernel: Linux 2.6.24.111 #32810 Tue Oct 17 00:54:15 CEST 2017 mips)
Status: up ~3days now, no issues, wifi noticeably more stable than prev build
Reset: yes, erased nvram and chanced restoring config backup from DD-WRT v3.0-r33525 mini, no issues
Errors: none

Before the Oct builds I was running DD-WRT v3.0-r27453 (06/25/15), a suggested K3.x for the e3000. Tues I stepped up to the r33525 mini build, and it's been running mostly without issues for the last couple of days (it had trouble handling 30/30/30s but did fine after a 30s power cycle). This one's been up for almost an hour w/no issues, but I'm not using a lot of extra stuff yet. Wired and 2.6g/5g (default band) throughput look good. Thanks to all for the resources/help, and esp for brainslayer's late night slimming on this, looks like it's working here.


Last edited by mr3 on Mon Oct 23, 2017 16:35; edited 1 time in total
Whammy
DD-WRT User


Joined: 14 Aug 2007
Posts: 50

PostPosted: Fri Oct 20, 2017 18:43    Post subject: Reply with quote
jwh7 wrote:
Router/Version: Linksys E1500
Firmware: DD-WRT v3.0-r33555 mega (10/20/17)
Kernel: Linux 3.10.107 mips (LEDE GCC 6.3.0 r3143-e982c4b) ) #16360 Fri Oct 20 11:07:53 CEST 2017
Previous: 33525 k3.10.107
Mode/Status: AP
Reset: No
Issues/Errors: No issues, up for 30min.

Thanks to redhawk for talking to BS about the k3x size issue!


Yes!!!!! Thank you redhawk!!!
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2576
Location: Indy

PostPosted: Fri Oct 20, 2017 18:56    Post subject: Reply with quote
mr3 wrote:
Reset: yes, erased nvram and chanced restoring config backup from DD-WRT v3.0-r33525 mini
Fyi, restoring an old config exactly negates having erased nvram.

Router/Version: Netgear WNDR4000
Firmware: DD-WRT v3.0-r33555 mega (10/20/17)
Kernel: Linux 3.10.107 #16360 Fri Oct 20 11:07:53 CEST 2017 mips
Previous: 33215 k3.10
Mode/Status: 2.4 GHz CB + 5 GHz AP
Reset: No
Issues/Errors: Up 15min, no issues except time showed as not set, until I ran:
    ntpclient us.pool.ntp.org

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 20.7.1|FT2020.5: EA6900v1.1@1GHz, F7D8302@532|DD 44294: DIR-810L, WNDR4500v2 & 4000@533,
R6300v1, RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT 19.7.3: RT-ACRH13, R6220, WNDR3700v4
Goto page 1, 2, 3, 4, 5, 6, 7  Next Display posts from previous:    Page 1 of 7
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum