New build is out 33525 (BS) 2017-10-17

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4, 5  Next
Author Message
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Tue Oct 17, 2017 15:31    Post subject: New build is out 33525 (BS) 2017-10-17 Reply with quote
ftp://ftp.dd-wrt.com/betas/2017/10-17-2017-r33525/


This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 33525_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless.
If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
[I prefer answere in whole sentence]
Sponsor
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11430
Location: Wherever the wind blows- North America

PostPosted: Tue Oct 17, 2017 16:01    Post subject: Reply with quote
K3.x Broadcom too big for 8M flash...I've been in touch with BS over this. He's looking into it.

Standby

redhawk

_________________
Donations have dwindled so testing is limited to C/CB and R/RB modes on just a few newer models. No old router testing performed any longer.

Looking for more test units (newer models only) for the project...got a brick?...PM me to make a hardware donation. (USA) A donation is not a debricking service....it is a way to "Give back" to the dd-wrt project.

I do NOT provide personal assistance through chat or phone....so please don't ask.
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1235
Location: Canada

PostPosted: Tue Oct 17, 2017 16:10    Post subject: Reply with quote
redhawk0 wrote:
K3.x Broadcom too big for 8M flash...I've been in touch with BS over this. He's looking into it.

Standby

redhawk


TIA!!

_________________
Home Network on Telus PureFibre - Wired GigaBit Backbone
| SSH | DDNS | DNSCrypt-Proxy | DHCP/Static IPs | Ad-Blocking |
| USB Storage - Scripts Only | VLANs/BRs | WiFi - APs/VAPs |
| OpenVPN-Client | YAMon3 | Telus-IPv6 | ebtables | ip6tables |

Multi 2x R7000 Setup - KONGAC 35550M Release 2018-03-28 (k4.4.124#548SMP)

______________________
YAMon 3.0 | Ad-Blocking for DD-WRT
DDWRT 60-day Timeline/changelogs
Kong Builds | DD-WRT Beta Builds
CloneVince's copies of Kong's Arm Firmware
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 1900
Location: Indy

PostPosted: Tue Oct 17, 2017 16:19    Post subject: Reply with quote
33492 thread wrote:
1. (redhawk0) K3X builds still too big for (most*) 8 MB flash routers: http://svn.dd-wrt.com/ticket/5936
* E1200v2 and E1500 work since they have 64KB more (7872 KB total); so should E900 and E800 (untested)
I'll try on my E1500 tonight.
Edit...you beat me Razz
redhawk0 wrote:
K3.x Broadcom too big for 8M flash...I've been in touch with BS over this. He's looking into it.
Thanks redhawk! Btw, please also advise BS/Kong on these, if not aware, to help reduce size:
1. http://svn.dd-wrt.com/ticket/5999 (tatsuya46) possible flash space saver [regards help files and samba]
2. http://svn.dd-wrt.com/ticket/6003 (Mile-Lile) include drill (ldns) instead of nslookup (12kb difference)

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: Builds, Types, Modes, Changelog, Peacock, Demo #
x64 OPNsense 18.7r10|EA6900v1.1 Xwrt 380.70|DD: 36247 WNDR4500v2, WNDR4000@533, E1500@353, R6300v1,
2*E2500, WRT54*@250: GLv1.1 nks, GSv6 µ
|RT-N66U@663 Merlin 380.70|OEM: WGR614v10@400-WNR1000v3 mod


Last edited by jwh7 on Wed Oct 18, 2017 2:51; edited 1 time in total
tickerguy
DD-WRT Novice


Joined: 15 Dec 2016
Posts: 4

PostPosted: Tue Oct 17, 2017 17:11    Post subject: Reply with quote
DOES NOT BOOT ON RT-AC68R

Forced me back to 11/14/16 (r30880) via the rescue utility.
xarvox
DD-WRT Novice


Joined: 29 Dec 2009
Posts: 12

PostPosted: Tue Oct 17, 2017 18:30    Post subject: Reply with quote
Asus rt-n13U V1

Upgraded from V3.0 r31024, did not reset router before nor after update.

Everything seems to work just fine!

However i seem to have dropped the USB stick i had mounted as /opt and some other paths (/mnt and /jffs i belive).
The mount path fields under Services/USB are gone too..
(it might be my memory that´s failing tho, just as likely...)

I used ftp://ftp.dd-wrt.com/betas/2017/10-17-2017-r33525/asus-rtn13u/Asus-RTN13U-webflash.bin

I probably used some "non-standard" distro to enable my usb storage some months ago, havent the faintest idea of exactly what distro, exept that it was "dd-wrt", r31024.

But that´s not a dealbreaker for me, the number one priority is to close the krack!

From the bottom of my heart, thank you VERY much for this VERY swift security fix, you guys (and gals?) are the best!
..Apple still havent dropped a patch for their wifi products and they´re a multi-billion-dollar enterprise..
And you guys are WAY ahead of that dinosaur!!! Very Happy
Whammy
DD-WRT User


Joined: 14 Aug 2007
Posts: 50

PostPosted: Tue Oct 17, 2017 18:52    Post subject: Reply with quote
redhawk0 wrote:
K3.x Broadcom too big for 8M flash...I've been in touch with BS over this. He's looking into it.

Standby

redhawk


Thank you!!
dreammaster1975
DD-WRT Novice


Joined: 31 Jan 2012
Posts: 22

PostPosted: Tue Oct 17, 2017 18:58    Post subject: broadcom_K3X works for me on E4200 V1 Reply with quote
flashed broadcom_K3X build:

dd-wrt.v24-33525_NEWD-2_K3.x_mega-e4200.bin 17-Oct-2017 11:38 filesize in byte 8000512
--> flash via WebUi

--> up and running even with this size

Sysinfo show
Router-ModellLinksys E4200
Firmware-Version DD-WRT v3.0-r33525 mega (10/17/17)
Kernel VersionLinux 3.10.107 #16316 Tue Oct 17 10:35:29 CEST 2017 mips
CPU-ModellBroadcom BCM4716 chip rev 1

Maybe because the E4200 has a 16MB flash chip

DD-wrt WIKI tec. specs

CPU Broadcom BCM4718
CPU Speed 480 MHz
Flash ROM 16 MB -->!!
Macronix MX25L12845E

So that mean that on any 8MB (e3000 e.g) this may not work, but for an E4200 V1 this build works.

:D fix for CVE-2017-13080 should included :D
shadowlmd
DD-WRT Novice


Joined: 27 Sep 2017
Posts: 5

PostPosted: Tue Oct 17, 2017 19:05    Post subject: Reply with quote
Successfully flashed Asus RT-N66U from r33492 using dd-wrt.v24-33525_NEWD-2_K3.x-big-RT-N66U.trx, no issues.
mbze430
DD-WRT User


Joined: 14 May 2012
Posts: 163

PostPosted: Tue Oct 17, 2017 19:25    Post subject: Reply with quote
After upgrade and doing a factory reset. The 2nd WiFi on my ASUS AC66U still say 2.4ghz and no 5ghz

And none of my 5ghz clients are UNABLE to connect when set to 5ghz Only

[/img]



EDIT: corrected from ABLE to UNABLE

_________________
ASUS RT-AC66U - Deployed Client's site
ASUS RT-AC3200 - Merlin
ASUS RT-AC5200 - Merlin


Last edited by mbze430 on Tue Oct 17, 2017 21:02; edited 1 time in total
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 1900
Location: Indy

PostPosted: Tue Oct 17, 2017 19:43    Post subject: Reply with quote
mbze430 wrote:
And none of my 5ghz clients are able to connect when set to 5ghz Only
The router or clients are set to '5GHz only'? If the router, try using NA-Mixed mode.
dreammaster1975 wrote:
So that mean that on any 8MB (e3000 e.g) this may not work, but for an E4200 V1 this build works.
Some 8MB routers (like the E1500, E1200v2, E900, and E800) have 8060928 bytes flash (7872 KB), and should also work, as with 33492.
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: Builds, Types, Modes, Changelog, Peacock, Demo #
x64 OPNsense 18.7r10|EA6900v1.1 Xwrt 380.70|DD: 36247 WNDR4500v2, WNDR4000@533, E1500@353, R6300v1,
2*E2500, WRT54*@250: GLv1.1 nks, GSv6 µ
|RT-N66U@663 Merlin 380.70|OEM: WGR614v10@400-WNR1000v3 mod


Last edited by jwh7 on Wed Oct 18, 2017 2:49; edited 1 time in total
Newbrain
DD-WRT User


Joined: 28 Dec 2013
Posts: 150

PostPosted: Tue Oct 17, 2017 20:40    Post subject: ASUS RT-AC68U bricks with this build Reply with quote
tickerguy wrote:
DOES NOT BOOT ON RT-AC68R

Forced me back to 11/14/16 (r30880) via the rescue utility.


Same for me (on a 68U)

(And out of sheer stupidity I was posting in the Atheros forum) Embarassed
wicket
DD-WRT Novice


Joined: 18 Jul 2017
Posts: 35
Location: Wisconsin, USA

PostPosted: Tue Oct 17, 2017 20:47    Post subject: Reply with quote
Router/Version: Linksys EA6500 v1
Firmware: DD-WRT v3.0-r33525 giga (10/17/17)
Kernel: Linux 3.10.107 #16300 Tue Oct 17 10:20:33 CEST 2017 mips
Previous: DD-WRT v3.0-r33492 std (10/10/17)
Mode/Status: Gateway/AP
Reset: NO
Issues/Errors: None so far
mbze430
DD-WRT User


Joined: 14 May 2012
Posts: 163

PostPosted: Tue Oct 17, 2017 21:03    Post subject: Reply with quote
jwh7 wrote:
mbze430 wrote:
And none of my 5ghz clients are able to connect when set to 5ghz Only
The router or clients are set to '5GHz only'? If the router, try using NA-Mixed mode.



My bad, I meant UNABLE. None of the client set to 5GHZ can connect to the router, only if they are set to 2.4ghz


plus no NA-Mix or anything to do with AC

_________________
ASUS RT-AC66U - Deployed Client's site
ASUS RT-AC3200 - Merlin
ASUS RT-AC5200 - Merlin
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 293

PostPosted: Tue Oct 17, 2017 21:22    Post subject: Reply with quote
Router/Version: Buffalo WZR-1750DHP & DHPD
Firmware: DD-WRT v3.0-r33525 std (10/17/17)
Kernel: Linux 4.4.92 #2126 SMP Mon Oct 16 15:01:29 CEST 2017 armv7l
Previous: BS r33413
Mode/Status: Gateway/Working
Reset: yes via the webGUI
Issues/Errors: None so far

All what i use is working so far and i'll report back if any issue arise. Overclocking is still not enabled/supported anymore but this version is not resetting the CPU back to default speeds so i'll use it.

Thanks Devs.
Goto page 1, 2, 3, 4, 5  Next Display posts from previous:    Page 1 of 5
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum