New Kong test build: DD-WRT 33525M - 2017/10/16

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5  Next
Author Message
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1848
Location: Canada

PostPosted: Tue Oct 17, 2017 12:03    Post subject: Re: New Kong test build: DD-WRT 33525M - 2017/10/16 Reply with quote
christian1980nrw wrote:
Is this WPA2 Krack Hotfix already integrated?
http://svn.dd-wrt.com/changeset/33525


Changeset 33525 does show fixes Krack Issues with wpa retransmission.

But, looking at the changsets the Krack HotFix was fixed on 33526 on Oct 17...

http://svn.dd-wrt.com/changeset/33526

But it looks to update hostapd for Qualcomm Atheros. Is Broadcom fine or more to come?

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
Sponsor
pOo
DD-WRT Novice


Joined: 16 Oct 2017
Posts: 9

PostPosted: Tue Oct 17, 2017 12:24    Post subject: Reply with quote
Router: 1 x Netgear R7000
Firmware: DD-WRT v3.0-r33525M kongac (10/16/17)
Previous: DD-WRT v24-sp2 (06/06/14) kongac (SVN revision 24200M)
Kernel: Linux 4.4.92 #454 SMP Mon Oct 16 21:39:05 CEST 2017 armv7l
Status: Working
Reset: No
Errors: Yes, complete Network down. Had to repower.
Update method : Command ddup --flash-latest

I just had once after 1 hour a network downtime. Had to manually power / reset.
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1848
Location: Canada

PostPosted: Tue Oct 17, 2017 12:50    Post subject: Reply with quote
pOo wrote:
Router: 1 x Netgear R7000
Firmware: DD-WRT v3.0-r33525M kongac (10/16/17)
Previous: DD-WRT v24-sp2 (06/06/14) kongac (SVN revision 24200M)
Kernel: Linux 4.4.92 #454 SMP Mon Oct 16 21:39:05 CEST 2017 armv7l
Status: Working
Reset: No
Errors: Yes, complete Network down. Had to repower.
Update method : Command ddup --flash-latest

I just had once after 1 hour a network downtime. Had to manually power / reset.


I have over 15 hours of uptime with build 33525 on both R7000s.

Looks like your coming from a very old build I would document all settings and reset nvram with this command...

erase nvram && reboot

Then, manually configure your R7000.

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
sideup66
DD-WRT User


Joined: 26 Nov 2016
Posts: 112

PostPosted: Tue Oct 17, 2017 12:53    Post subject: Reply with quote
router: netgear r6300v2
running current firmware
status: up and running
reset: no
Vpn: working
samba: working

All good here, router is up and seems to be happy. Thanks for the prompt patching!
christian1980nrw
DD-WRT Novice


Joined: 17 Sep 2006
Posts: 4

PostPosted: Tue Oct 17, 2017 15:12    Post subject: Re: New Kong test build: DD-WRT 33525M - 2017/10/16 Reply with quote
mac913 wrote:
christian1980nrw wrote:
Is this WPA2 Krack Hotfix already integrated?
http://svn.dd-wrt.com/changeset/33525


Changeset 33525 does show fixes Krack Issues with wpa retransmission.

But, looking at the changsets the Krack HotFix was fixed on 33526 on Oct 17...

http://svn.dd-wrt.com/changeset/33526

But it looks to update hostapd for Qualcomm Atheros. Is Broadcom fine or more to come?


...so we have to wait for a new build...?
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1848
Location: Canada

PostPosted: Tue Oct 17, 2017 16:17    Post subject: Re: New Kong test build: DD-WRT 33525M - 2017/10/16 Reply with quote
christian1980nrw wrote:
mac913 wrote:
christian1980nrw wrote:
Is this WPA2 Krack Hotfix already integrated?
http://svn.dd-wrt.com/changeset/33525


Changeset 33525 does show fixes Krack Issues with wpa retransmission.

But, looking at the changsets the Krack HotFix was fixed on 33526 on Oct 17...

http://svn.dd-wrt.com/changeset/33526

But it looks to update hostapd for Qualcomm Atheros. Is Broadcom fine or more to come?


...so we have to wait for a new build...?


BrainSlayer has release 33525 for Broadcom, so the Krack must be fixed for Broadcom to see a release from him. The 33526 is for more Atheros fixes.

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
eywong
DD-WRT User


Joined: 21 Jul 2010
Posts: 120
Location: USA

PostPosted: Tue Oct 17, 2017 16:41    Post subject: Asus RT-AC68U Reply with quote
Router: Asus RT-AC68U (H/W Ver: A1)
Firmware: DD-WRT v3.0-r33525M kongac (10/16/17)
Previous: DD-WRT v3.0-r33520M kongac (10/14/17)
Kernel: Linux 4.4.92 #454 SMP Mon Oct 16 21:39:05 CEST 2017 armv7l
Previous: Linux 4.4.92 #452 SMP Sat Oct 14 15:20:11 CEST 2017 armv7l
Status: ok
Reset: no (ddup --flash-remote http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/dd-wrt.v24-K3_AC_ARM_STD.bin)
Errors: no
Uptime: 1:00
r4nd0m
DD-WRT User


Joined: 01 Dec 2006
Posts: 84
Location: UK

PostPosted: Tue Oct 17, 2017 18:19    Post subject: Re: New Kong test build: DD-WRT 33525M - 2017/10/16 Reply with quote
[quote="mac913"][quote="christian1980nrw"]
mac913 wrote:


BrainSlayer has release 33525 for Broadcom, so the Krack must be fixed for Broadcom to see a release from him. The 33526 is for more Atheros fixes.


to be fair - patching either side is fine AP or client ...

_________________
Netgear X6 R8000 - DD-WRT v3.0-r34320M kongac
tkrupa
DD-WRT Novice


Joined: 17 Oct 2017
Posts: 1

PostPosted: Tue Oct 17, 2017 19:07    Post subject: Reply with quote
Router: R7000
Firmware: DD-WRT v3.0-r33525M
Previous: DD-WRT v3.0-r31160M
Kernel: Linux 4.4.92 #454 SMP Mon Oct 16 21:39:05 CEST 2017 armv7l DD-WRT
Status: Working
Reset: No
Errors: No
Update method : Command ddup --flash-latest
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4339
Location: Germany

PostPosted: Tue Oct 17, 2017 19:08    Post subject: Re: New Kong test build: DD-WRT 33525M - 2017/10/16 Reply with quote
mac913 wrote:
christian1980nrw wrote:
Is this WPA2 Krack Hotfix already integrated?
http://svn.dd-wrt.com/changeset/33525


Changeset 33525 does show fixes Krack Issues with wpa retransmission.

But, looking at the changsets the Krack HotFix was fixed on 33526 on Oct 17...

http://svn.dd-wrt.com/changeset/33526

But it looks to update hostapd for Qualcomm Atheros. Is Broadcom fine or more to come?


It does not make sense to read commit messages if you do not understand them.

The change in 33526 only switches some older targets, to the patched version from yesterday.

Units like Marvel/IPQ have always been on our latest hostapd, which he already fixed yesterday:-)

If you look at:

http://svn.dd-wrt.com/browser/src/router

you will see the different hostapd versions, some older targets still used the older hostapd versions.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
James2k
DD-WRT Guru


Joined: 23 Oct 2011
Posts: 549

PostPosted: Tue Oct 17, 2017 19:19    Post subject: Reply with quote
Quote:
Router: Netgear R7000
Firmware: Firmware: DD-WRT v3.0-r33525M kongac (10/16/17)
Kernel: 4.4.92
Status: Good
Reset: No
Errors: None


After over 100+ uptime on 32170M, I updated because of the KRACK vulnerability.

Updated with ddup. Flash went well.

I did have an issue with NTP, but I believe that was DNSCrypt. I removed my previous set NTP server hostname and left it blank and applied settings and this allowed NTP to sync. I believe there is actually a few NTP hosts configured by default in the firmware to workaround this issue now.

Otherwise, did not observe any further problems.

All the main services us on my router in my signature are working as far as I can tell.

Thanks devs!

_________________
James

Main router:

Netgear R7000 overclocked to 1.2GHz - DD-WRT v3.0-r35965M kongac

IPv6 6in4 (HE.net), OpenVPN (with PBR and split tunnelling), Entware, dnsmasq with ipset

Easy ipset support for the R7000

VPN speed: Download: 77.96 Mbps Upload: 5.00 Mbps (AES-128-CBC HMAC-SHA1)

Yes you can get 50 Mbps+ with OpenVPN on a R7000 if you configure it properly!

Previous routers:

ASUS RT-N66U - The Dark Knight
WNR2000v3 - Bought on the cheap for someone else, neutered crap
WNR3500Lv1 - First venture into the DD-WRT world
tickerguy
DD-WRT Novice


Joined: 15 Dec 2016
Posts: 13

PostPosted: Tue Oct 17, 2017 20:40    Post subject: Reply with quote
Router: Asus RT-AC68R
Firmware: DD-WRT v3.0-r33525M kongac (10/16/17)
Kernel: Linux 4.4.92 #454 SMP Mon Oct 16 21:39:05 CEST 2017 armv7l
Status: OK
Reset: No
Errors: No

Previous firmware was 11-14-2016-STD (NOT Kong) and the router did not require a reset or reconfiguration -- it came up clean on a straight upgrade.
zfil
DD-WRT Novice


Joined: 12 Oct 2014
Posts: 31

PostPosted: Tue Oct 17, 2017 21:28    Post subject: Reply with quote
Router: R7000
Firmware: DD-WRT v3.0-r33525M kongac (10/16/17)
Kernel: Linux r7000 4.4.92 #454 SMP Mon Oct 16 21:39:05 CEST 2017 armv7l DD-WRT
Upgraded: from r33520M via ddup --flash-remote http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/dd-wrt.v24-K3_AC_ARM_STD.bin
Reset: no
Status: error

Hello Guys

My R7000 was running fine 28815M, lately I've upgraded to 32170M, then all the late Kong TEST firmware up to 33525M.

The good: download is must faster thanks to the Shortcut Forwarding Engine and now KRACK is patched
The bad: I can't get a stable router, after a couple of hours it freeze with out of memory errors.

I've erased the config (using web ui's factory erase), cleaned jjfs but still the same issues.

Anybody as an idea of what I could try to fix or at least troubleshoot the issue ?

Thanks


Code:

Oct 17 23:07:20 r7000 kern.warn kernel: wland invoked oom-killer: gfp_mask=0x26040c0, order=0, oom_score_adj=0
Oct 17 23:07:20 r7000 kern.warn kernel: CPU: 1 PID: 1179 Comm: wland Tainted: P                4.4.92 #454
Oct 17 23:07:20 r7000 kern.warn kernel: Hardware name: Northstar Prototype
Oct 17 23:07:20 r7000 kern.warn kernel: Backtrace:
Oct 17 23:07:21 r7000 kern.warn kernel: [<8001b2cc>] (dump_backtrace) from [<8001b4a0>] (show_stack+0x18/0x1c)
Oct 17 23:07:21 r7000 kern.warn kernel:  r7:00000005 r6:60000013 r5:00000000 r4:80515920
Oct 17 23:07:21 r7000 kern.warn kernel: [<8001b488>] (show_stack) from [<8016484c>] (dump_stack+0x8c/0xa0)
Oct 17 23:07:21 r7000 kern.warn kernel: [<801647c0>] (dump_stack) from [<8009c0bc>] (dump_header.constprop.5+0x54/0x164)
Oct 17 23:07:21 r7000 kern.warn kernel:  r7:00000005 r6:865bcb50 r5:00000000 r4:86799e54
Oct 17 23:07:21 r7000 kern.warn kernel: [<8009c068>] (dump_header.constprop.5) from [<8009c3f8>] (oom_kill_process+0x94/0x4bc)
Oct 17 23:07:21 r7000 kern.warn kernel:  r10:8050c638 r9:8050c638 r8:86799e54 r7:00000005 r6:865bcb50 r5:0000f892
Oct 17 23:07:21 r7000 kern.warn kernel:  r4:865bc800
Oct 17 23:07:21 r7000 kern.warn kernel: [<8009c364>] (oom_kill_process) from [<8009cb70>] (out_of_memory+0x2e4/0x370)
Oct 17 23:07:21 r7000 kern.warn kernel:  r10:8050c638 r9:8050c638 r8:8050c794 r7:0000f892 r6:00000162 r5:86799e54
Oct 17 23:07:21 r7000 kern.warn kernel:  r4:865bc800
Oct 17 23:07:21 r7000 kern.warn kernel: [<8009c88c>] (out_of_memory) from [<800a07b0>] (__alloc_pages_nodemask+0x670/0x738)
Oct 17 23:07:21 r7000 kern.warn kernel:  r10:026040c0 r9:00400000 r8:00000000 r7:00000000 r6:00000000 r5:86798000
Oct 17 23:07:21 r7000 kern.warn kernel:  r4:00000000
Oct 17 23:07:21 r7000 kern.warn kernel: [<800a0140>] (__alloc_pages_nodemask) from [<800c63f4>] (cache_alloc_refill+0x2a8/0x4f0)
Oct 17 23:07:21 r7000 kern.warn kernel:  r10:804f4b18 r9:00400000 r8:00000000 r7:878003c0 r6:00000000 r5:87801240
Oct 17 23:07:21 r7000 kern.warn kernel:  r4:024000c0
Oct 17 23:07:21 r7000 kern.warn kernel: [<800c614c>] (cache_alloc_refill) from [<800c6790>] (kmem_cache_alloc+0x74/0xc8)
Oct 17 23:07:21 r7000 kern.warn kernel:  r10:00000000 r9:86798000 r8:00000000 r7:00000000 r6:40000013 r5:878003c0
Oct 17 23:07:21 r7000 kern.warn kernel:  r4:024000c0
Oct 17 23:07:21 r7000 kern.warn kernel: [<800c671c>] (kmem_cache_alloc) from [<800d76e8>] (getname_flags+0x30/0x150)
Oct 17 23:07:21 r7000 kern.warn kernel:  r7:00000000 r6:76e6c118 r5:80503a20 r4:00020000
Oct 17 23:07:21 r7000 kern.warn kernel: [<800d76b8>] (getname_flags) from [<800d7820>] (getname+0x18/0x1c)
Oct 17 23:07:21 r7000 kern.warn kernel:  r10:00000000 r9:86798000 r8:800096e4 r7:fffff000 r6:00000000 r5:ffffff9c
Oct 17 23:07:21 r7000 kern.warn kernel:  r4:00020000 r3:00020000
Oct 17 23:07:21 r7000 kern.warn kernel: [<800d7808>] (getname) from [<800c9330>] (do_sys_open+0x118/0x1d4)
Oct 17 23:07:21 r7000 kern.warn kernel: [<800c9218>] (do_sys_open) from [<800c940c>] (SyS_open+0x20/0x24)
Oct 17 23:07:21 r7000 kern.warn kernel:  r9:86798000 r8:800096e4 r7:00000005 r6:00000000 r5:76e6bf35 r4:76f09629
Oct 17 23:07:21 r7000 kern.warn kernel: [<800c93ec>] (SyS_open) from [<80009540>] (ret_fast_syscall+0x0/0x34)
Oct 17 23:07:21 r7000 kern.warn kernel: Mem-Info:
Oct 17 23:07:21 r7000 kern.warn kernel: active_anon:421 inactive_anon:0 isolated_anon:0
Oct 17 23:07:21 r7000 kern.warn kernel:  active_file:592 inactive_file:400 isolated_file:0
Oct 17 23:07:21 r7000 kern.warn kernel:  unevictable:36 dirty:0 writeback:0 unstable:0
Oct 17 23:07:21 r7000 kern.warn kernel:  slab_reclaimable:112 slab_unreclaimable:2452
Oct 17 23:07:21 r7000 kern.warn kernel:  mapped:606 shmem:0 pagetables:62 bounce:0
Oct 17 23:07:21 r7000 kern.warn kernel:  free:31670 free_pcp:155 free_cma:0
Oct 17 23:07:21 r7000 kern.warn kernel: Normal free:1320kB min:1400kB low:1748kB high:2100kB active_anon:544kB inactive_anon:0kB active_file:20kB inactive_file:0kB unevictable:144kB isolated(anon):0kB isolated(file):0kB present:131072kB managed:123464kB mlocked:0kB di
Oct 17 23:07:21 r7000 kern.warn kernel: lowmem_reserve[]: 0 1024 1024
Oct 17 23:07:21 r7000 kern.warn kernel: HighMem free:125360kB min:128kB low:500kB high:872kB active_anon:1140kB inactive_anon:0kB active_file:2364kB inactive_file:1576kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:131072kB managed:131072kB mlocked:0k
Oct 17 23:07:21 r7000 kern.warn kernel: lowmem_reserve[]: 0 0 0
Oct 17 23:07:21 r7000 kern.warn kernel: Normal: 32*4kB (UM) 31*8kB (UM) 60*16kB (UM) 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 1336kB
Oct 17 23:07:21 r7000 kern.warn kernel: HighMem: 22*4kB (UM) 83*8kB (UM) 64*16kB (UM) 30*32kB (UM) 16*64kB (UM) 8*128kB (UM) 1*256kB (M) 3*512kB (UM) 2*1024kB (U) 1*2048kB (M) 28*4096kB (M) = 125360kB
Oct 17 23:07:21 r7000 kern.warn kernel: 1031 total pagecache pages
Oct 17 23:07:21 r7000 kern.warn kernel: 0 pages in swap cache
Oct 17 23:07:21 r7000 kern.warn kernel: Swap cache stats: add 0, delete 0, find 0/0
Oct 17 23:07:21 r7000 kern.warn kernel: Free swap  = 0kB
Oct 17 23:07:21 r7000 kern.warn kernel: Total swap = 0kB
Oct 17 23:07:21 r7000 kern.warn kernel: 65536 pages RAM
Oct 17 23:07:21 r7000 kern.warn kernel: 32768 pages HighMem/MovableOnly
Oct 17 23:07:21 r7000 kern.warn kernel: 1902 pages reserved
Oct 17 23:07:21 r7000 kern.info kernel: [ pid ]   uid  tgid total_vm      rss nr_ptes nr_pmds swapents oom_score_adj name
Oct 17 23:07:21 r7000 kern.info kernel: [  615]     0   615      189      118       4       0        0             0 hotplug2
Oct 17 23:07:21 r7000 kern.info kernel: [  619]     0   619      200      113       3       0        0             0 mstpd
Oct 17 23:07:21 r7000 kern.info kernel: [  948]     0   948      215      101       3       0        0             0 dropbear
Oct 17 23:07:21 r7000 kern.info kernel: [ 1001]     0  1001      387      203       3       0        0             0 dnsmasq
Oct 17 23:07:21 r7000 kern.info kernel: [ 1171]     0  1171      360      183       3       0        0             0 process_monitor
Oct 17 23:07:21 r7000 kern.info kernel: [ 1175]     0  1175      352      200       3       0        0             0 upnp
Oct 17 23:07:21 r7000 kern.info kernel: [ 1179]     0  1179      343      148       4       0        0             0 wland
Oct 17 23:07:21 r7000 kern.info kernel: [ 1193]     0  1193      233      167       3       0        0             0 dropbear
Oct 17 23:07:21 r7000 kern.info kernel: [ 1202]     0  1202      182       84       4       0        0             0 cron
Oct 17 23:07:21 r7000 kern.info kernel: [ 1203]     0  1203      291      151       4       0        0             0 sh
Oct 17 23:07:21 r7000 kern.info kernel: [ 1234]     0  1234      547      258       5       0        0             0 radio_timer
Oct 17 23:07:21 r7000 kern.info kernel: [ 1242]     0  1242      290      159       3       0        0             0 syslogd
Oct 17 23:07:21 r7000 kern.info kernel: [ 1244]     0  1244      290      154       3       0        0             0 klogd
Oct 17 23:07:21 r7000 kern.info kernel: [ 1258]     0  1258     1034      360       4       0        0             0 httpd
Oct 17 23:07:21 r7000 kern.info kernel: [ 1260]     0  1260      296      120       3       0        0             0 resetbutton
Oct 17 23:07:21 r7000 kern.info kernel: [ 7719]     0  7719      357      205       4       0        0             0 nas
Oct 17 23:07:21 r7000 kern.info kernel: [ 8994]     0  8994      290      126       3       0        0             0 tail
Oct 17 23:07:21 r7000 kern.err kernel: Out of memory: Kill process 1258 (httpd) score 5 or sacrifice child
Oct 17 23:07:21 r7000 kern.err kernel: Killed process 1258 (httpd) total-vm:4136kB, anon-rss:472kB, file-rss:968kB
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4339
Location: Germany

PostPosted: Tue Oct 17, 2017 22:00    Post subject: Reply with quote
diogosena wrote:
LZ4 compression in Openvpn server is broken.

"Options error: bad comp option: lz4"


I checked the sources for openvpn it is a problem with the configure script, it tries to use my hosts lz4 lib, I guess BS does not have liblz4 installed . If openvpn configure does not detect lz4 it switches to internal compat lz4, which is supplied by openvpn.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
JAMESMTL
DD-WRT Guru


Joined: 13 Mar 2014
Posts: 856
Location: Montreal, QC

PostPosted: Tue Oct 17, 2017 22:35    Post subject: Reply with quote
Kong will you be re-adding lz4? While not the end of the world it would be nice to have all my openvpn servers running identical configs. I run multiple (min 2) openvpn servers manually via script on each ddwrt router.
Goto page Previous  1, 2, 3, 4, 5  Next Display posts from previous:    Page 2 of 5
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum