Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Wed Oct 11, 2017 0:18 Post subject:
BrainSlayer wrote:
other people reported its fixed and your ticket list is insane full of old tickets which are no way reproduceable. see apply over wan etc. i do this every day
and your spiking latencies is maybe a indicator of a broken cable? its just the switch which works indepenend from any os
reported what is fixed exactly?
old tickets, yes cause they arent getting fixed. applying settings over wan still isnt fixed it causes a empty white page for a very long time. qca wifi channels are still incorrectly listed (i think i found where u did not understand, but u didnt reply anymore). beamformee u removed it from qca, all other vendors are fine just qca its half broken beamforming now. qca units have inconsistent gui, missing fragmentation threshold (& u have rts threshold & frag threshold values reversed), qca units have no option for controling 802.11d/h ath10k ac/n-mixed for some reason force enables it, "mixed" and its off, check the beacon info. aittime fairness is missing still, but stock has it. check the tickets please.. cause i dont think u looked at many of them in detail..
i already tried multiple cables & pcs, there is something wrong in the ipq806x switch, why just ipq806x & no other switches in other routers? why is wifi fine? like i said i need to have a fast wan to even see this, even 60mbps is not enough & u will think theres no issue.. consider some setting in the switch is wrong like missing flow control, or inturrupt moderation is incorrect, or rx buffers too high/low etc..
i would reduce the list if they were fixed..
there is also more issues i didnt even make a ticket for yet, like more qos, its very poor at high speeds like this 150mbps i have
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Oct 11, 2017 1:50 Post subject:
airtime fairness from mac80211 is included and always on. for the rest i will check. beamformee / er is shown as chipset reports support for it by vht flags. 988x has no support for it, but 9984 or 998x has support for it. and apply over wan has no issue. doing this every day
same for switch issue. i have a r7800 which is connected by the switch to a eth to fiber converter and i get no spikes and full speed
edit:
about beamformee on 9984. its removed because it causes a firmware crash on 9984 chipsets _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Oct 11, 2017 2:01 Post subject:
but at least your qos issue seem to be fixed now in my latest internal version _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
root@Archer-C7:/tmp# write tplink_archer-c7-v2-IL.bin linux
function stop_snmp not found
Image too big for partition: linux
linux: Invalid argument
root@Archer-C7:/tmp#
Nothing.
will check that
can you post the output of cat /proc/mtd ?
same thing as B@R, cannot upgrade via webgui, and via telnet the image is too big; for both "33492" and "33413".
"33375" is the latest i could load; webgui failed, but telnet successful.
TP-Link TL-WDR3600v1
Code:
root@tl-wdr3600:/tmp# write tl-wdr3600-webflash.bin linux
function stop_freeradius not found
Image too big for partition: linux
linux: Invalid argument
root@tl-wdr3600:/tmp#
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Oct 11, 2017 2:56 Post subject:
the issue i described with the last firmware release and the missdetected partition size does not just apply to the archer c7. alot of tplink devices are affected.
this has been fixed with the newest but causes now upgrading troubles
there is a way out. just need to write a safe instruction for upgrading to avoid fatal bricks. if you're able to recover with any bootloader recovery method. just do it. this is safe _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Router Model:TP-Link Archer C7 V2
Status:Web Upgraded from build 30082 to r33492 via google chrome
Reset:No
Errors:None,
if i go to Wireless tab kinda lag other tab fine, alot of new feature i dont know yet this version, what is Cache DNSSEC data means? PPPoE, IPv6, DDNS, QOS work fine, wifi 2.4 ghz work fine 5 ghz work too, but my setting is mixed wide HT40 auto channel,my STB work with 5 ghz now usually not working i dont really now what cause it
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Oct 11, 2017 3:25 Post subject:
dioey wrote:
Router Model:TP-Link Archer C7 V2
Status:Web Upgraded from build 30082 to r33492 via google chrome
Reset:No
Errors:None,
if i go to Wireless tab kinda lag other tab fine, alot of new feature i dont know yet this version, what is Cache DNSSEC data means? PPPoE, IPv6, DDNS, QOS work fine, wifi 2.4 ghz work fine 5 ghz work too, but my setting is mixed wide HT40 auto channel,my STB work with 5 ghz now usually not working i dont really now what cause it
auto channel select the best channel based on the selected country. but that could also mean that your stb does not support the selected channel. dont know its capabilties.
cache dnssec data means. ahm how to describe. it caches and validates dnssec data. dnssec is a security extension for dns which signs dns replies to proof its origin. this option basicly supports dnssec validation and caching (dnsmasq is a dns cache as you may know)
Router Model:TP-Link Archer C7 V2
Status:Web Upgraded from build 30082 to r33492 via google chrome
Reset:No
Errors:None,
if i go to Wireless tab kinda lag other tab fine, alot of new feature i dont know yet this version, what is Cache DNSSEC data means? PPPoE, IPv6, DDNS, QOS work fine, wifi 2.4 ghz work fine 5 ghz work too, but my setting is mixed wide HT40 auto channel,my STB work with 5 ghz now usually not working i dont really now what cause it
auto channel select the best channel based on the selected country. but that could also mean that your stb does not support the selected channel. dont know its capabilties.
cache dnssec data means. ahm how to describe. it caches and validates dnssec data. dnssec is a security extension for dns which signs dns replies to proof its origin. this option basicly supports dnssec validation and caching (dnsmasq is a dns cache as you may know)
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Oct 11, 2017 3:44 Post subject:
its up to you. there is no harm but protects against fake dns replies _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Oct 11, 2017 7:52 Post subject:
pandaken12 wrote:
Router: TP-Link TL-1043ND v1.x
Reset: yes.
Errors: Yes.
Cannnot Web upgrade from r33375
Now, no downgrade and upgrade from web gui Or telnet
same issue. the previous version broke upgrades. this is fixed, but you have to find a way to recover _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
root@Archer-C7:/tmp# write tplink_archer-c7-v2-IL.bin linux
function stop_snmp not found
Image too big for partition: linux
linux: Invalid argument
root@Archer-C7:/tmp#
