New Build 33215 (BS): 08-25-2017-r33215

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4  Next
Author Message
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2587
Location: Indy

PostPosted: Fri Aug 25, 2017 15:25    Post subject: New Build 33215 (BS): 08-25-2017-r33215 Reply with quote
Downloads at:
ftp://ftp.dd-wrt.com/betas/2017/08-25-2017-r33215/

Changelogs:
Note: SFE accelerated NAT is in 33006+ builds but only in kernel 3.10 and newer (& Previous Changeset)
Raw changelog (ending w/ 33215): http://svn.dd-wrt.com/timeline?from=Aug+25%2C+2017&daysback=3&changeset=on
Summary (thru 29739; now deprecated): https://www.dd-wrt.com/phpBB2/viewtopic.php?t=279467

Tickets closed as 'fixed':
#5936 (Netgear 3700 v3 Will not update to r33180) closed by flood404

Issues, observations, and/or workarounds reported:
-K3X builds are smaller than 33180, but still bigger than 33006; k2.4 builds are smaller now
1. (jwh7) K26 is still missing big, mega & openvpn builds (mini builds' size is still same incl. since 33006)
2. (egc) [from prior builds] Policy-Based Routing doesn't work with SFE enabled.
http://svn.dd-wrt.com/ticket/5900
3. (egc) [from prior builds] "OpenVPN 2.4 is stable but you have to tweak your configuration files notably:"
mtu-disc yes
proto udp4

Template code to copy for posting a reply:
Code:
[b]Router/Version: [/b]
[b]Firmware: [/b]
[b]Kernel: [/b]
[b]Previous: [/b]
[b]Mode/Status: [/b]
[b]Reset: [/b]
[b]Issues/Errors: [/b]

WARNING: This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29000_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 20.7.3|FT2020.6: EA6900v1.1@1GHz, F7D8302@532|DD 44528: DIR-810L, WNDR4500v2 & 4000@533,
R6300v1, RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT 19.7.3: RT-ACRH13, R6220, WNDR3700v4


Last edited by jwh7 on Sat Aug 26, 2017 23:49; edited 2 times in total
Sponsor
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 411

PostPosted: Fri Aug 25, 2017 18:39    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r33215 std (08/25/17)
Kernel: Linux 4.4.83 #1923 SMP Thu Aug 24 21:09:13 CEST 2017 armv7l
Previous: r33180
Mode/Status: Gateway/working
Reset: no
Issues/Errors: none

Blue Thyristor
DD-WRT Novice


Joined: 28 Jul 2017
Posts: 25

PostPosted: Fri Aug 25, 2017 20:33    Post subject: Reply with quote
This build is mostly working fine, with minor issues carried over from older builds:

Router/Version: Linksys E3000
Firmware: dd-wrt.v24-33215_NEWD-2_K3.x_mega-e3000, DD-WRT v3.0-r33215M mega (08/25/17)
Issues/Errors:

Is the M at the end significant?

On Basic Setup page, the help file ends abruptly in help/HSetup.asp:

Code:
<script type="text/javascript">Capture(hidx.page21)</script><dt><script type="text/javascript">Capture(idx.legend3)</script></dt><!--dd>Select the time zone for your location, or desired location.</dd><dd>Check all values and click <i>Save Settings</i> to save your settings. Click <i>Cancel Changes</i> to cancel your unsaved changes. You can test the settings by connecting to th

It ends there, in the middle of a word, which doesn't matter anyway because the browser sees the text as a comment, so the page ends with the title "Time Settings" with no text under it. It would be nice to see a word or two there about STP and the new toy, Shortcut FE.

"CPU Features," the label, was shown as "undefined" for a while (the feature list was there anyway) after flashing, but I can no longer reproduce it, not without re-flashing.

WDS icon (in WiViz) is still missing. Strange, what is stopping BS/K/whomever from including the/an image?

Router/Version: Cisco Valet M10 v1
Firmware: dd-wrt.v24-33215_NEWD-2_K2.6_std_nokaid_small, DD-WRT v3.0-r33215 std-nokaid-small (08/25/17)
Issues/Errors:

This one doesn't have the M...

Client bridge mode, same problem with NTP not working. Had to save
Code:
ntpclient -h pool.ntp.org
in startup.

WiViz starts up, but, unlike E3000, sees nothing.
wicket
DD-WRT Novice


Joined: 18 Jul 2017
Posts: 41
Location: Wisconsin, USA

PostPosted: Fri Aug 25, 2017 20:54    Post subject: Reply with quote
Router/Version: Linksys EA 6500v1
Firmware: DD-WRT v3.0-r33215M giga (08/25/17)
Kernel: Linux 3.10.107 #15778 Fri Aug 25 11:42:58 CEST 2017 mips
Previous: DD-WRT v3.0-r33006 giga (08/03/17)
Mode/Status: Gateway/AP
Reset: No
Issues/Errors: None So Far

Everything seems to be working normal. DDNS working, Port range forwards working properly, static leases working.
lexgreen
DD-WRT Novice


Joined: 15 Jul 2017
Posts: 8

PostPosted: Fri Aug 25, 2017 21:17    Post subject: Reply with quote
Router/Version: TP-Link C1900
Current Firmware: DD-WRT v3.0-r33215 std (08/25/17)
Kernel: Linux 4.4.83 #1925 SMP Fri Aug 25 07:31:33 CEST 2017 armv7l
Previous Firmware: r33180
Mode/Status: Gateway/working
Reset: no
Issues/Errors: none
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5336
Location: Texas

PostPosted: Fri Aug 25, 2017 22:34    Post subject: Reply with quote
E2500
DD-WRT v3.0-r33215M mega (08/25/17)
Linux 3.10.107 #15794 Fri Aug 25 11:57:59 CEST 2017 mips
[dd-wrt.v24-33215_NEWD-2_K3.x_mega.bin]
Install over r33006
test router
Working ok

<--->

E1200v2
DD-WRT v3.0-r33215M mega (08/25/17)
Linux 3.10.107 #15794 Fri Aug 25 11:57:59 CEST 2017 mips
[dd-wrt.v24-33215_NEWD-2_K3.x_mega-nv64k.bin]
Install over r31899
test router
Working ok
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11473
Location: Wherever the wind blows- North America

PostPosted: Fri Aug 25, 2017 22:35    Post subject: Reply with quote
Router/Version: E3000
Firmware: DD-WRT v3.0-r33215M mega (08/25/17)
Kernel: Linux 3.10.107 #15794 Fri Aug 25 11:57:59 CEST 2017 mips
Mode/Status: CB/AP
Reset: No
Issues/Errors: Only NTP not working. Still have to manually set date/time.

This build of K3 just barely fits the 8M flash.

redhawk

_________________
I do NOT provide personal assistance through chat or phone....so please don't ask.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5336
Location: Texas

PostPosted: Fri Aug 25, 2017 23:26    Post subject: Reply with quote
WRT54Gv2.2
DD-WRT v3.0-r33215 mini (08/25/17)
Linux 2.4.37 #46428 Fri Aug 25 05:56:33 CEST 2017 mips
[dd-wrt.v24_mini_generic.bin]
Install over r33006
test router
Working ok
<----->
WRT54GSv2
DD-WRT v3.0-r33215 mega (08/25/17)
Linux 2.4.37 #46437 Fri Aug 25 06:05:32 CEST 2017 mips
[dd-wrt.v24_mega_generic.bin]
Install over r31899
takes a long dang time to install this using webif... but it worked.
test router
Working ok
<----->
WRT54GSv5
DD-WRT v3.0-r33215 micro (08/25/17)
Linux 2.4.37 #46442 Fri Aug 25 06:11:30 CEST 2017 mips
[dd-wrt.v24_micro_generic.bin]
Install over r31899
test router
Working ok
<----->
Also installed the micro on da WAP

anyone installing on a WAPv3 ~ 3.1 after you click the upgrade button just let it
cook for 5 - 7 minutes then you can yank the plug, wait 20 sec, and all should be good.
s13m11t7
DD-WRT Novice


Joined: 23 Aug 2017
Posts: 3

PostPosted: Sat Aug 26, 2017 0:37    Post subject: Reply with quote
Router/Version: Linksys EA 6500v1
Firmware: DD-WRT v3.0-r33215M giga (08/25/17)
Kernel: Linux 3.10.107 #15778 Fri Aug 25 11:42:58 CEST 2017 mips
Previous: DD-WRT v3.0-r33006 giga (08/03/17)
Mode/Status: Gateway/AP
Reset: No
Issues/Errors: OpenVPN Client - OK, OpenVPN Server - doesn't connect...

From OPENVPN Status page:

State
Server: Local Address:
Remote Address:


Client: CONNECTED SUCCESS Local Address: 10.35.10.6
Remote Address: 10.35.10.5
slobodan
DD-WRT Guru


Joined: 03 Nov 2011
Posts: 1551
Location: Zwolle

PostPosted: Sat Aug 26, 2017 0:46    Post subject: Reply with quote
Two pieces of RT-N16 build 33006 big flashed to 33215 big. All ok.

One piece of E4200 build 33006 flashed with dd-wrt.v24-33215_NEWD-2_K3.x_mega-e3000.bin. All ok.

Four pieces of E3000 build 33006 flashed with dd-wrt.v24-33215_NEWD-2_K3.x_mega-e3000.bin. All ok.

_________________
2 times RT-AC56U running 33772 with entware-ng, Yamon 3 (SFE disabled).

Asus RT-N16 running Merlin LTS fork RT-N16_3.0.0.4_374.43_2-25E8j9527.trx with entware-ng.

2 times Asus RT-N16 running dd-wrt.v24-33772_NEWD-2_K3.x_big.bin with entware-ng

E4200 V1 running dd-wrt.v24-33772_NEWD-2_K3.x_mega-e3000.bin

3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running dd-wrt.v24-33772_NEWD-2_K3.x_mega-e3000.bin (bridged with LAN cable)

stephensuley
DD-WRT Guru


Joined: 09 Feb 2008
Posts: 623
Location: Canada

PostPosted: Sat Aug 26, 2017 1:18    Post subject: Reply with quote
Router/Version: Asus RT-AC66U
Firmware: DD-WRT v3.0-r33215M giga (08/25/17)
Kernel: Linux 3.10.107 #15778 Fri Aug 25 11:42:58 CEST 2017 mips
Previous: DD-WRT v3.0-r33006 giga (08/03/17)
Mode/Status: Router/AP (wl0 and wl1 both enabled NG-mixed w/ WPA2)
Reset: No
Issues/Errors: None So Far

Notes: WAN is disabled. This AP is connected back-2-back with a client bridge.

Router/Version: Asus RT-AC87U
Firmware: DD-WRT v3.0-r33215 std (08/25/17)
Kernel: Linux 4.4.83 #1930 SMP Fri Aug 25 07:57:51 CEST 2017 armv7
Previous: DD-WRT v3.0-r33006 std (08/03/17)
Mode/Status: Router/Client Bridge (wl0 enabled n-only network w/WPA2)
Reset: No
Issues/Errors: Route to the default gateway is not applied

Notes: For some reason the client bridge has no default route, thus router itself is unable to have connectivity with the internet. I have the gateway IP (192.168.2.1)configured in the setup tab, and it has worked for sometime this way, after this upgrade it stopped working as expected. Upon investigation there is no default route displayed in the route command. So I add it manually and then all router local services start working. I think I will try a full nvram erase ,reset and reprogram.

root@asus87u:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br0
169.254.39.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
root@asus87u:~# route add default gw 192.168.2.1
root@asus87u:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 br0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br0
169.254.39.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 br0


Router/Version: Linksys WRT1900AC
Firmware: DD-WRT v3.0-r33215 std (08/25/17)
Kernel: Linux 4.9.44 #42 SMP Mon Aug 21 00:54:23 CEST 2017 armv7
Previous: DD-WRT v3.0-r33006 std (08/03/17)
Mode/Status: Gateway/AP (wl0 enabled NG-mixed w/ WPA2)
Reset: No
Issues/Errors: None So Far

Notes: The long range client bridge is reported on both sides as the signal has improved ~5-10% after the upgrade

_________________
Location 1-rural) Cottage WRT1900AC v1 (AP)- (NG)2.4Ghz/40Mhz) --250ft l.o.s.-->Pool House RT-AC87u (N-Only/client bridge) <back2back> RT-AC68u (wl0 & wl1 in AP mode / WAN disabled) - 150MBit/s end to end

Location 2-urban) - 1x Linksys EA8500 (AP)

Location 3-rural) - 1x Asus RT-AC87u (AP)

Latest and greatest builds Wink
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2587
Location: Indy

PostPosted: Sat Aug 26, 2017 1:58    Post subject: Reply with quote
Router/Version: Netgear WNDR4500v2
Firmware: DD-WRT v3.0-r33215M giga (08/25/17)
Kernel: Linux 3.10.107 #15778 Fri Aug 25 11:42:58 CEST 2017 mips
Previous: 33006
Mode/Status: 2.4GHz CB + 5GHz AP
Reset: No
Issues/Errors: Fine, running 1.5hr so far

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 20.7.3|FT2020.6: EA6900v1.1@1GHz, F7D8302@532|DD 44528: DIR-810L, WNDR4500v2 & 4000@533,
R6300v1, RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT 19.7.3: RT-ACRH13, R6220, WNDR3700v4
bg4drl
DD-WRT Novice


Joined: 16 Jan 2017
Posts: 40

PostPosted: Sat Aug 26, 2017 8:28    Post subject: Reply with quote
R8500 not up wifi
vpn client set up after the restart wifi unable to up
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5336
Location: Texas

PostPosted: Sat Aug 26, 2017 13:30    Post subject: Reply with quote
E2500
Install remotely via ssh over r32170
static leases
local DNS
guest on wl0.1
DDNS
ovpn server
all seems good

dd-wrt.v24-33215_NEWD-2_K3.x_mega.bin is here:
http://mrjcd.com/test/r33215/33215mega.bin
if anyone wants to use it --- don't have to worry with renaming file
after you wget it before write. Just do a ls -la on tmp dir after wget
make sure it's all there.
33215mega.bin should be 7991296 bytes
Whammy
DD-WRT User


Joined: 14 Aug 2007
Posts: 50

PostPosted: Sat Aug 26, 2017 13:43    Post subject: Reply with quote
redhawk0 wrote:
Router/Version: E3000
Firmware: DD-WRT v3.0-r33215M mega (08/25/17)
Kernel: Linux 3.10.107 #15794 Fri Aug 25 11:57:59 CEST 2017 mips
Mode/Status: CB/AP
Reset: No
Issues/Errors: Only NTP not working. Still have to manually set date/time.

This build of K3 just barely fits the 8M flash.

redhawk


No it doesn't. The WNR3500L fails to flash.
Goto page 1, 2, 3, 4  Next Display posts from previous:    Page 1 of 4
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum