Joined: 03 Dec 2009
|Posted: Tue Aug 22, 2017 6:26 Post subject: PC Engine ALIX A2D3 Mainboard, Case, Power Supply, WiFi Card
|100$ plus 13 shipping in the US
PC Engine Alix Single Board Computer
It has DD-WRT Full x86 software installed and activated (paid version). It also have the SuperChannel Option Activated (another Paid option)
PC Engine Alix A2D13 Main Board
PC Engine Case (Black)
2Gb CF Card
(2) +3db Antennas
DD-WRT Fully Registered and Licensed software with Super-channel enabled.
alix2d3 System board
Status Active, but not recommended for new designs.
Part numbers alix2d13 = 3 LAN / 1 miniPCI / LX800 / 256 MB / USB, added battery, I2C header, COM2 header, internal USB header
CPU: 500 MHz AMD Geode LX800
DRAM: 256 MB DDR DRAM (128 MB on alix2d19)
Storage: CompactFlash socket, 44 pin IDE header
Power: DC jack or passive POE, min. 7V to max. 20V
Three front panel LEDs, pushbutton
Expansion: 1 miniPCI slot, LPC bus
Connectivity: 3 Ethernet channels (Via VT6105M 10/100)
I/O: DB9 serial port, dual USB port
Board size: 6 x 6" (152.4 x 152.4 mm) - same as WRAP.1E
Changes from ALIX.2C
Increase USB current limit.
USB headers as build option.
USB ports 3 and 4 on header (not tested).
Change optional serial header J12 to COM2.
Add LED and switch pins to I2C header.
Populate buzzer driver circuit, add pins for use as GPIO.
Add option for power in header J18.
Some enhancements to reduce EMI.
Add second POSCAP to ruggedize 3.3V rail for high power radio cards.