D-Link DIR-882 A1 AC2600

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next
Author Message
Uxinn
DD-WRT Novice


Joined: 23 Feb 2010
Posts: 5

PostPosted: Sun May 19, 2019 20:47    Post subject: Reply with quote
I upgraded to r39296 and it's looking better, a bit too early to tell but at least 4hours without a drop.

I'm running my router in "Router" mode and my router is effectively only an Access point.
Sponsor
Iangh
DD-WRT Novice


Joined: 22 Apr 2019
Posts: 13

PostPosted: Mon May 20, 2019 0:39    Post subject: Reply with quote
Uxinn wrote:
I upgraded to r39296 and it's looking better, a bit too early to tell but at least 4hours without a drop.

I'm running my router in "Router" mode and my router is effectively only an Access point.


That's the one I'm using and have saved as 'stable' on my usb drive. I've tried the ones that come after and keep reverting to r39296.
Uxinn
DD-WRT Novice


Joined: 23 Feb 2010
Posts: 5

PostPosted: Tue May 21, 2019 1:12    Post subject: Reply with quote
Yes r39296 is stable and so far problem free for me, but the firmware listed on the router-database is not () - at least not with my config.
* Tried both router and gateway mode
jefbuan
DD-WRT Novice


Joined: 18 May 2011
Posts: 17

PostPosted: Sun May 26, 2019 9:26    Post subject: Reply with quote
I got my refurbished 882 and flash ddwrt v39296 but it's web gui , telnet and ssh can't access on my pc. how to revert back to original firmware?
casualtester
DD-WRT User


Joined: 13 Dec 2015
Posts: 252

PostPosted: Sun May 26, 2019 16:43    Post subject: Reply with quote
jefbuan wrote:
... how to revert back to original firmware?


Existing topic: Ddwrt back to factory issue
goontown
DD-WRT Novice


Joined: 30 May 2019
Posts: 1

PostPosted: Thu May 30, 2019 11:35    Post subject: FTP, NAS and DLNA Reply with quote
Hi.

Im running the build r39296 and its stable but i cant activate ftp, dlna and nas. Is there an other build that will work with this? or is it in progress?
jalfraag
DD-WRT Novice


Joined: 29 Dec 2017
Posts: 8

PostPosted: Thu May 30, 2019 18:23    Post subject: Re: FTP, NAS and DLNA Reply with quote
goontown wrote:
Hi.

Im running the build r39296 and its stable but i cant activate ftp, dlna and nas. Is there an other build that will work with this? or is it in progress?


Flash 38159, setup FTP etc then flash 39296 without a reset.
878/882 builds are a mess.
rotarum
DD-WRT Novice


Joined: 06 Mar 2007
Posts: 17

PostPosted: Sat Jun 01, 2019 21:38    Post subject: Reply with quote
Set to Wide HT40.

But still the Clients connect with HT20 only (65mbps)

Build #39296

Encryption set to WPA2 PSK with AES... what can it be??



EDIT:

Upgrade to the latest build from broly (first page)

DD-WRT v4.14-r39800M CRISPIN (05/14/19)


HT40 Mode and VHT160 same time working perfect!

Beside this the LED's show correctly too Smile
v43
DD-WRT Novice


Joined: 25 Aug 2018
Posts: 2

PostPosted: Mon Jun 03, 2019 2:35    Post subject: broly 39800 and 39924 rev firmwares Reply with quote
Hey all, I tried the broly 39800 and 39924 dd-wrt firmware for the dir-882 a1.

My issue is I could not setup openvpn client through this build of dd-wrt. I ensured I followed the full instructions from the vpn provider. I triple checked the user name and password, also that it is currently valid vpn account, which it is, and this is what my log said, see below, and claimed it was an authentication error. I did not have an issue with Brainslayer's beta in this regard. I have also set up other dd-wrt routers successfully using the openvpn instructions.

Otherwise this firmware build seems truly awesome from what I have seen and heard. Any help/input would be greatly appreciated. Thank you in advance. I am a newbie to networking so the answer might be something obvious.


Jun 2 21:42:05 DD-WRT httpd[1540]: pam_unix(httpd:auth): check pass; user unknown
Jun 2 21:42:05 DD-WRT httpd[1540]: pam_unix(httpd:auth): authentication failure; logname= uid=0 euid=0 tty= ruser= rhost=
Jun 2 21:42:12 DD-WRT httpd[1540]: pam_unix(httpd:auth): check pass; user unknown
Jun 2 21:42:12 DD-WRT httpd[1540]: pam_unix(httpd:auth): authentication failure; logname= uid=0 euid=0 tty= ruser= rhost=
Jun 2 21:42:19 DD-WRT httpd[1540]: pam_unix(httpd:auth): check pass; user unknown
Jun 2 21:42:19 DD-WRT httpd[1540]: pam_unix(httpd:auth): authentication failure; logname= uid=0 euid=0 tty= ruser= rhost=
Jun 2 21:42:27 DD-WRT httpd[1540]: pam_unix(httpd:auth): check pass; user unknown
Jun 2 21:42:27 DD-WRT httpd[1540]: pam_unix(httpd:auth): authentication failure; logname= uid=0 euid=0 tty= ruser= rhost=
Jun 2 21:42:35 DD-WRT httpd[1540]: pam_unix(httpd:auth): check pass; user unknown
Jun 2 21:42:35 DD-WRT httpd[1540]: pam_unix(httpd:auth): authentication failure; logname= uid=0 euid=0 tty= ruser= rhost=
Jun 2 21:42:36 DD-WRT httpd[1540]: pam_unix(httpd:auth): check pass; user unknown
Jun 2 21:42:41 DD-WRT start_single_service: openvpn : OpenVPN daemon (Client) successfully stopped
Jun 2 21:42:41 DD-WRT start_single_service: pptpd : daemon successfully stopped
Jun 2 21:42:43 DD-WRT start_single_service: openvpn : OpenVPN daemon (Client) hanging, send SIGKILL
Jun 2 21:42:43 DD-WRT httpd[1540]: pam_unix(httpd:auth): check pass; user unknown
Jun 2 21:42:43 DD-WRT start_single_service: openvpn : OpenVPN daemon (Client) starting/restarting...
jefbuan
DD-WRT Novice


Joined: 18 May 2011
Posts: 17

PostPosted: Tue Jun 04, 2019 7:30    Post subject: Reply with quote
rotarum wrote:
Set to Wide HT40.

But still the Clients connect with HT20 only (65mbps)

Build #39296

Encryption set to WPA2 PSK with AES... what can it be??



EDIT:

Upgrade to the latest build from broly (first page)

DD-WRT v4.14-r39800M CRISPIN (05/14/19)


HT40 Mode and VHT160 same time working perfect!

Beside this the LED's show correctly too Smile


I did broly lstest build but have you manage to enable NAS ??

edit: upgrade to broly's latest v39957 , I can mount my usb HD drive..Big thanks..
ashishchandra
DD-WRT Novice


Joined: 17 Oct 2018
Posts: 13

PostPosted: Sun Jun 09, 2019 17:27    Post subject: Reply with quote
I did broly lstest build but have you manage to enable NAS ??

edit: upgrade to broly's latest v39957 , I can mount my usb HD drive..Big thanks..[/quote]


Is it stable ?
jefbuan
DD-WRT Novice


Joined: 18 May 2011
Posts: 17

PostPosted: Mon Jun 10, 2019 9:23    Post subject: Reply with quote
yup very much stable no reboots at all..NAS and Entware also works great.Thanks to broly for bothering his PM .Butstill I dont have write permission on my NTFS USB drive , ext4 format no problems,,other than that it's stable
ashishchandra
DD-WRT Novice


Joined: 17 Oct 2018
Posts: 13

PostPosted: Tue Jun 11, 2019 21:24    Post subject: Reply with quote
jefbuan wrote:
yup very much stable no reboots at all..NAS and Entware also works great.Thanks to broly for bothering his PM .Butstill I dont have write permission on my NTFS USB drive , ext4 format no problems,,other than that it's stable


Hey, thanks for your response.

Process to revet to stock is also the same right ?
Iangh
DD-WRT Novice


Joined: 22 Apr 2019
Posts: 13

PostPosted: Tue Jun 11, 2019 23:22    Post subject: Reply with quote
Tried Broly's v39957. Faster speeds on 2.4Ghz, went from 50Mbps to 60Mbps sat next to the router. On 5Ghz actually saw a rate of 490Mbps in network properties of win10. Before, highest was 390Mbps. Did notice a lot more errors, nothing to be excited about but not zero as per standard dd-wrt. Has the same problem as before: couldn't assign static addresses. I could put one in and save and apply and it would revert to blank. Workaround was to install backup from standard, which captured the static/MACs but when I went to add one via the gui they all disappeared.

On a previous Broly it didn't capture the DDNS but this version did.

Anybody else using Broly's having an issue with static addresses?
jefbuan
DD-WRT Novice


Joined: 18 May 2011
Posts: 17

PostPosted: Wed Jun 12, 2019 10:04    Post subject: Reply with quote
ashishchandra wrote:
jefbuan wrote:
yup very much stable no reboots at all..NAS and Entware also works great.Thanks to broly for bothering his PM .Butstill I dont have write permission on my NTFS USB drive , ext4 format no problems,,other than that it's stable


Hey, thanks for your response.

Process to revet to stock is also the same right ?


yup same..if you tried his version , I think you will not mind reverting back to orig firware..
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next Display posts from previous:    Page 6 of 8
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum