D-Link DIR-882 A1 AC2600

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Goto page Previous  1, 2, 3 ... , 11, 12, 13  Next
Author Message
gustavrsh
DD-WRT Novice


Joined: 08 Dec 2019
Posts: 2

PostPosted: Thu Dec 12, 2019 4:03    Post subject: Reply with quote
SegFault22 wrote:

I have the latest Broly firmware, and it works fine. I had been using the stock firmware but it was at best, so so (disconnects, hangs, etc...) I had updated to the latest DDWRT firmware a couple months back, but it didn't really improve things for my router. YMMV


Initially I installed the latest Broly build (the SP one) and PPPoE didn't work. So I thought I could go back to stock firmware but couldn't install it (within ddwrt or recovery mode). While searching for stock firmware on the D-link FTP I found the a ddwrt build and installed that. PPPoE works now. It's a dated build (32693) but at least PPPoE is working.

I could try the broly build again (or update the vanilla build) if a solution to PPPoE is found.

EDIT: That was not stable at all. Tried the latest build on router database and it just bootloops. So I flashed stock again.

Seems like there isn't a 100% stable ddwrt build yet. I don't have the knowledge or know-how to help with it though. Good luck with you all.
Sponsor
DarkfullDante
DD-WRT Novice


Joined: 08 Jan 2020
Posts: 2

PostPosted: Wed Jan 08, 2020 20:05    Post subject: Reply with quote
SegFault22 wrote:
I have the latest Broly firmware


Do you have the link for the version. I'm new to DD-WRT, I have the stock version and I'm having slow wifi issue, especially on the 2.4GHz
DarkfullDante
DD-WRT Novice


Joined: 08 Jan 2020
Posts: 2

PostPosted: Thu Jan 09, 2020 15:08    Post subject: Reply with quote
DarkfullDante wrote:
Do you have the link for the version.


Well that was a stupid question.... Anyway I did find the links (Next time I'll learn to read the thread especially when the answer is the 4th post in it).

Can someone recommand what recent build to use. I seem to have poor 2.4GHz performance also. Any recommanded setting for that?
casualtester
DD-WRT User


Joined: 13 Dec 2015
Posts: 279

PostPosted: Thu Jan 09, 2020 20:06    Post subject: Reply with quote
DarkfullDante wrote:
Can someone recommand what recent build to use...


Following from another thread,

Iceberger wrote:
r41874 is working just fine for me.
ilvinasnan
DD-WRT Novice


Joined: 09 Nov 2012
Posts: 1

PostPosted: Sat Jan 18, 2020 14:14    Post subject: Reply with quote
m_p11 wrote:
hello!
I have dir-882 with Russian firmware 3.5.0 by default.
and i cant install in recovery ANY other firmware's, always there is message that image failed to pass verification


Same situation here Rolling Eyes

Could anyone help? How to run away from this RU firmware?
netlag
DD-WRT Novice


Joined: 23 Jan 2020
Posts: 1

PostPosted: Thu Jan 23, 2020 18:01    Post subject: Reply with quote
Hi there guys. I am reaching out to you for help.
I am using build 41984M.

I have set the following static route through the web interface:

Select set number : 1(DSL4G)
Route name : DSL4G
Metric : 0
Destination LAN NET : 0.0.0.0
Subnet Mask : 0.0.0.0
Gateway : 192.168.1.1
Interface : LAN&WLAN

I would like to toggle the gateway between 192.168.1.1 and 192.168.1.254 quickly with SSH.

Can somebody help me make a command that changes and applies the gateway to 192.168.1.254 ?

Thank you in advance!
j0ep
DD-WRT Novice


Joined: 18 Feb 2011
Posts: 5

PostPosted: Sat Jan 25, 2020 12:54    Post subject: Reply with quote
j0ep wrote:
Good to read that the latest build seems to be working for some people. Which installation procedure did you follow?


Last build upgraded fine! Thanks @broly!
mrwulf
DD-WRT Novice


Joined: 27 Jan 2020
Posts: 18

PostPosted: Mon Jan 27, 2020 10:38    Post subject: Reply with quote
I tried .40559 on my DIR-882 on Saturday and the 5Ghz performance was horrendous. I was only getting 70mbps sitting right next to the router.

I tried various different channels and forced 80mhz. 2.4ghz seemed fine.

What's the most stable build of DD-WRT for these?

Is r41874 still the firmware of choice on these?
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 592

PostPosted: Mon Jan 27, 2020 13:11    Post subject: Reply with quote
I don't have your router, but I can tell you development became experimental after 12-29-2019-r41813.
mrwulf
DD-WRT Novice


Joined: 27 Jan 2020
Posts: 18

PostPosted: Mon Jan 27, 2020 22:06    Post subject: Reply with quote
blkt wrote:
I don't have your router, but I can tell you development became experimental after 12-29-2019-r41813.


What does that mean?
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 3443
Location: Texas, USA

PostPosted: Mon Jan 27, 2020 23:18    Post subject: Reply with quote
mrwulf wrote:
blkt wrote:
I don't have your router, but I can tell you development became experimental after 12-29-2019-r41813.


What does that mean?


It means that he obviously doesn't realize all development in this firmware is experimental... but seriously, he is talking about the kernel-level smbd development going on.

_________________
E4200 v1 DD-WRT 42287 mega (02/06/20) K3.x
R7000P DD-WRT 40270M kongac
E4200 v1 FreshTomato 2020.1
E4200 v1 FreshTomato 2020.2.development
R7000 FreshTomato 2020.2.development
E4200 v1 1.0.07.development
WRT3200ACM OpenWRT 18.06.6
---------------------------------------------------------
Linux User #377467 counter.li.org / linuxcounter.net
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 592

PostPosted: Tue Jan 28, 2020 7:58    Post subject: Reply with quote
mrwulf wrote:
What does that mean?

Many changes began happening all at once after this build date; r41813 is stable for me (and PPPoE works unlike r41874).

kernel-panic69 wrote:
but seriously, he is talking about the kernel-level smbd development going on.

Also playing with LTO flags, but these are just two examples.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 3443
Location: Texas, USA

PostPosted: Tue Jan 28, 2020 21:37    Post subject: Reply with quote
42132 went public beta today, looks like.
_________________
E4200 v1 DD-WRT 42287 mega (02/06/20) K3.x
R7000P DD-WRT 40270M kongac
E4200 v1 FreshTomato 2020.1
E4200 v1 FreshTomato 2020.2.development
R7000 FreshTomato 2020.2.development
E4200 v1 1.0.07.development
WRT3200ACM OpenWRT 18.06.6
---------------------------------------------------------
Linux User #377467 counter.li.org / linuxcounter.net
mrwulf
DD-WRT Novice


Joined: 27 Jan 2020
Posts: 18

PostPosted: Wed Jan 29, 2020 8:50    Post subject: Reply with quote
Can anyone with a DIR-882 confirm which firmware version is best to use?

The stock D-Link firmware is too restrictive.
T-Fork
DD-WRT Novice


Joined: 06 Oct 2010
Posts: 23

PostPosted: Wed Jan 29, 2020 21:11    Post subject: Reply with quote
mrwulf wrote:
Can anyone with a DIR-882 confirm which firmware version is best to use?

The stock D-Link firmware is too restrictive.


I haven´t found a release that has been absolutely stable, so YMMV because others have reported good things on releases that I can´t get to function.
Goto page Previous  1, 2, 3 ... , 11, 12, 13  Next Display posts from previous:    Page 12 of 13
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum