So it has been more than twelve hours since i installed this build and configured it how i normally do and i haven't had one drop or GUI crash and it seems to be running okay with the exception of one error on the TX of wl1 while wl0 has none.
I have also noticed that wl0 & wl1 TX still transmits even after the devices have left the network as before but now it stops but after like say half of an hour.
Hope the above noobery helps the devs. Still using the firmware and i am waiting on the next version and devs. alternate some r&r for yourselves.
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Fri Jul 21, 2017 16:03 Post subject:
So did the GUI crash mentioned in previous replies happen only to Netgear routers?
For the records, Asus released new firmware to RT-N18U on 19 Jun 2017, with the following fixes:
Code:
ASUS RT-N18U Firmware version 3.0.0.4.380.7743 Security fixed:
- Fixed CVE-2017-8828 (XSS vulnerability)
- Fixed CVE-2017-5892 (JSONP Information Disclosure)
- Fixed CVE-2017-7494 (Samba remote code execution vulnerability)
(
BTW, I think my last reply was deleted or moved. I was asking whether a build should be marked "not usable". I think it's build 32737 which is now deleted.
Router: Linksys E2000
Firmware: DD-WRT v3.0-r32753 mega (07/19/17)
Kernel: Linux 3.10.107 #15221 Wed Jul 19 09:05:41 CEST 2017 mips
Status: Working
Reset: no
Errors: GUI still crashing, everything else seems fine. _________________ All we wanna do is eat your brains.
Netgear WNDR3700v3
Linksys e2000
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Wifi 5GHz can only have max 400mbps
Reset: no
Errors: None so far
Previous: no
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Wifi 5GHz can only have max 400mbps
Reset: no
Errors: None so far
Previous: no
Strange because i am getting as high as 800mbps on a Zen phone 3 Deluxe but i am getting errors, i have about 7 so far.
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Wifi 5GHz can only have max 400mbps
Reset: no
Errors: None so far
Previous: no
Strange because i am getting as high as 800mbps on a Zen phone 3 Deluxe but i am getting errors, i have about 7 so far.
Hmm, really? I have wifi card Killer 1535 and can reach more than 800mbps on original firmware. Can you please show your config?
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Wifi 5GHz can only have max 400mbps
Reset: no
Errors: None so far
Previous: no
Strange because i am getting as high as 800mbps on a Zen phone 3 Deluxe but i am getting errors, i have about 7 so far.
Hmm, really? I have wifi card Killer 1535 and can reach more than 800mbps on original firmware. Can you please show your config?
This is what i got this morning after the power came back so i have no errors to show, workmen are doing work on the power grid.
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Wifi 5GHz can only have max 400mbps
Reset: no
Errors: None so far
Previous: no
Strange because i am getting as high as 800mbps on a Zen phone 3 Deluxe but i am getting errors, i have about 7 so far.
7 errors in 12 hours is completely worthless of being discussed.
PS. why have you got manual Tx at 100mw if I may ask? _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Wifi 5GHz can only have max 400mbps
Reset: no
Errors: None so far
Previous: no
Strange because i am getting as high as 800mbps on a Zen phone 3 Deluxe but i am getting errors, i have about 7 so far.
7 errors in 12 hours is completely worthless of being discussed.
PS. why have you got manual Tx at 100mw if I may ask?
It wasn't being discussed, it was just mentioned as part of information sharing.
Router: Linksys WRT54G V4
Firmware: Updated from 02-07-2017-r31277
Not able to run it so had to step back. The only FW was able to run properly (by dd)
Firmware Version
DD-WRT v3.0-r32170 mini (06/01/17)
Kernel Version
Linux 2.4.37 #45452 Thu Jun 1 05:20:12 CEST 2017 mips
Status: UP, Internet UP, NAT UP, AP UP.
Reset: No.
Errors: GUI Down. Telnet only after Reset 30-30-30.
As said above, had had to do telnet downgrade till r32170.There was not able to telnet untill reset, and once done, was able to get GUI. So far no issues.
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Wifi 5GHz can only have max 400mbps
Reset: no
Errors: None so far
Previous: no
Strange because i am getting as high as 800mbps on a Zen phone 3 Deluxe but i am getting errors, i have about 7 so far.
Hmm, really? I have wifi card Killer 1535 and can reach more than 800mbps on original firmware. Can you please show your config?
This is what i got this morning after the power came back so i have no errors to show, workmen are doing work on the power grid.
Thanks for your screenshots. I need to change Regulatory Domain to US then I can change Wireless Channel (It was Auto and there was only 1 option). It is at 866Mbps now
Router: Buffalo WZR-1750DHP and DHPD
Firmware: DD-WRT v3.0-r32753 std (07/19/17)
Kernel: Linux 4.4.77 #1713 SMP Tue Jul 18 06:26:22 CEST 2017 armv7l
Status: Wifi 5GHz can only have max 400mbps
Reset: no
Errors: None so far
Previous: no
Strange because i am getting as high as 800mbps on a Zen phone 3 Deluxe but i am getting errors, i have about 7 so far.
Hmm, really? I have wifi card Killer 1535 and can reach more than 800mbps on original firmware. Can you please show your config?
This is what i got this morning after the power came back so i have no errors to show, workmen are doing work on the power grid.
Thanks for your screenshots. I need to change Regulatory Domain to US then I can change Wireless Channel (It was Auto and there was only 1 option). It is at 866Mbps now
Your welcome, yeah the regulatory domain plays a major part in it, if you choose a country that has no restrictions you can get full 1300 all the time but IMO that really isn't needed when devices are not using the network.
I'm interested too in this implementation. I have an E3000 in K2.6 r32597 because I have an 200Mbit connection so I need the most I can squeeze (tested K3.X but lost a lot of speed as is normal).
So how is the status of that implementation?
(hope that implementation is for my device too and I'm not saying stupid things)
If is someone tested TL901 v1 v3,TL743v2,TL941 v3.2 v3.5 v3.6,TLWR740N v4
please tell me test results i have small buget but i wanna be up to date,don't wanna be bricked again
I decided to test this build (Kernel 3.X) last night on my E3000 and far so good, only have the web GUI problems but that I can live with!
Tested the SFE and right now is working perfectly. I did a 2Gb download on steam and it marked almost 160Mbs on my 200Mbps connection! (in Kernel 3.X without SFE I get only in 80Mbs)
On stock I was getting 180Mbs so right now I am very happy!