New build: DD-WRT v3.0 --- 32737 --- 2017/07/18 (DELETED)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2
Author Message
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 4555
Location: Texas

PostPosted: Wed Jul 19, 2017 2:53    Post subject: Reply with quote
Brimmy wrote:
mrjcd wrote:
I installed on WRT54Gv2.2 ( 4/16 RAM) but never could access the webif
I strongly discourage installing r32737 on any Linksys WRT54G/GL/GS.

But if you need these files to help recover just go at it..
They're on a straight up http server so wget works just fine... on mini or greater firmware

http://mrjcd.com/test/r31899/r31899_micro_generic.bin
http://mrjcd.com/test/r31899/r31899_mini_generic.bin

'r32737-PoS_log'


hello,
i used your links and telnet did access the firmware but it did not install as i am sure i did/didn't do something. Can you say where i went wrong from the screen shot?

the links in my post are for wrt54g/gl/gs routers ONLY.
to know how look at the log.... starting with:
root@DD-WRT:~# cd /tmp
Sponsor
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 371

PostPosted: Wed Jul 19, 2017 3:14    Post subject: Reply with quote
mrjcd wrote:
Brimmy wrote:
mrjcd wrote:
I installed on WRT54Gv2.2 ( 4/16 RAM) but never could access the webif
I strongly discourage installing r32737 on any Linksys WRT54G/GL/GS.

But if you need these files to help recover just go at it..
They're on a straight up http server so wget works just fine... on mini or greater firmware

http://mrjcd.com/test/r31899/r31899_micro_generic.bin
http://mrjcd.com/test/r31899/r31899_mini_generic.bin

'r32737-PoS_log'


hello,
i used your links and telnet did access the firmware but it did not install as i am sure i did/didn't do something. Can you say where i went wrong from the screen shot?

the links in my post are for wrt54g/gl/gs routers ONLY.
to know how look at the log.... starting with:
root@DD-WRT:~# cd /tmp


Okay thanks.
Terrance73
DD-WRT Novice


Joined: 09 Jul 2017
Posts: 22

PostPosted: Wed Jul 19, 2017 11:17    Post subject: Re: Use TFTP2 to push older version back into the unit Reply with quote
Okay...will give a go. Thanks.
flood404 wrote:
Terrance73 wrote:
Wow...I cannot even get this build off the access point. I've putty in and deleted the NVRAM, and also done the 30/30/30; and she is still there.

Any ideas on how to buts this open, let me (us) know. Thanks.



You need to use the http://www.shadowsoftware.net/shadowgameworld/downloads/tftp2.exe program and push in a previous build. Pretty much download the r32597 build. Assign your own IP address use your user name and login info and push the previous build into the unit. Wait for it to reboot and you will have a working GUI again.


This is why the build is no longer available they removed it due to this huge bug.
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 371

PostPosted: Wed Jul 19, 2017 12:28    Post subject: Reply with quote
Thanks to the guidance of mrjcd and EA6500v1 i recovered from this build to r32597, this is how for Buffalo wzr1750dhp/d...

leave out the command = when you are imputing the commands, i just put that so you would know what command to put and do one command at a time.

telnet into your router
command = erase nvram
command = reboot
wait until router is booted telnet again into the router
command = wget ftp://ftp.dd-wrt.com/betas/2017/07-08-2017-r32597/buffalo_wzr-1750dhp/buffalo-wzr-1750dhp-webflash.bin file
command = write buffalo-wzr-1750dhp-webflash.bin linux
wait for the flash to be completed you will see done, then
comand = reboot
telnet once more into the router to check that the firmware was placed.
Terrance73
DD-WRT Novice


Joined: 09 Jul 2017
Posts: 22

PostPosted: Wed Jul 19, 2017 17:04    Post subject: Re: Use TFTP2 to push older version back into the unit Reply with quote
No dice....can't connect. I can ping it but every connection is refused, from your recommendation to SSH and Telnet. I've used admin as a password and my original password, and both connections are refused.


You need to use the http://www.shadowsoftware.net/shadowgameworld/downloads/tftp2.exe program and push in a previous build. Pretty much download the r32597 build. Assign your own IP address use your user name and login info and push the previous build into the unit. Wait for it to reboot and you will have a working GUI again.


This is why the build is no longer available they removed it due to this huge bug.[/quote]
EA6500v1
DD-WRT User


Joined: 06 Feb 2016
Posts: 50
Location: /etc

PostPosted: Wed Jul 19, 2017 17:19    Post subject: Re: Use TFTP2 to push older version back into the unit Reply with quote
Terrance73 wrote:
No dice....can't connect. I can ping it but every connection is refused, from your recommendation to SSH and Telnet. I've used admin as a password and my original password, and both connections are refused.


You need to use the http://www.shadowsoftware.net/shadowgameworld/downloads/tftp2.exe program and push in a previous build. Pretty much download the r32597 build. Assign your own IP address use your user name and login info and push the previous build into the unit. Wait for it to reboot and you will have a working GUI again.


This is why the build is no longer available they removed it due to this huge bug.


https://www.dd-wrt.com/wiki/index.php/Telnet/SSH_and_the_Command_Line#Using_Telnet

Quote:
This build thread is for reporting successes and problem with loading this experimental test build. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.


It's a little annoying when you don't read that disclaimer on the original post.
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 371

PostPosted: Wed Jul 19, 2017 19:16    Post subject: Re: Use TFTP2 to push older version back into the unit Reply with quote
Terrance73 wrote:
No dice....can't connect. I can ping it but every connection is refused, from your recommendation to SSH and Telnet. I've used admin as a password and my original password, and both connections are refused.


You need to use the http://www.shadowsoftware.net/shadowgameworld/downloads/tftp2.exe program and push in a previous build. Pretty much download the r32597 build. Assign your own IP address use your user name and login info and push the previous build into the unit. Wait for it to reboot and you will have a working GUI again.


This is why the build is no longer available they removed it due to this huge bug.
[/quote]

Firstly, what is the router you are trying to get a good flash onto? What i did was for Buffalo wzr 1750dhp & dhpd. Only the dhp was affected by this removed firmware and it is the one i use to test these firmware on and if it works out after say a few weeks i flash the dhpd.

This is how you telnet to the router and i suspect any router....
hard reset the router so if you had any static IP/DNS or any configurations that may impede the telnet session, then open the Command Prompt cmd with administrator rights, type telnet 192.168.1.1 hit enter then type root for the username, hit enter and admin for the password, then hit enter then you follow the other commands i put. Know that after every reboot command you have to telnet back into the router.

I am not saying you can't use tftp2/putty/any others to push the firmware, if that worked for you then fine.
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum