Joined: 16 Nov 2015 Posts: 6435 Location: UK, London, just across the river..
Posted: Tue Mar 21, 2017 5:39 Post subject: New Kong's build: DD-WRT v3.0-r31575M kongac (03/21/17)
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r31575M kongac (03/21/17)
Kernel Version Linux 4.4.52 #270 SMP Tue Mar 21 00:58:10 CET 2017 armv7l
reset:no
status:operational
errors: none so far
ddup latest
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29440_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55779 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 09 Nov 2014 Posts: 314 Location: Bakersfield, CA
Posted: Tue Mar 21, 2017 5:56 Post subject:
Router Model: 2x Netgear R7000
Firmware Build: DD-WRT v3.0-r31575M kongac (03/21/17)
Previous Build: DD-WRT v3.0-r31570M kongac (03/19/17)
Kernel Version: Linux 4.4.52 #270 SMP Tue Mar 21 00:58:10 CET 2017 armv7l
Reset: On the gateway, no, but on the AP box, yes.
Status: Working as a gateway and another as an Access Point. QoS and OpenVPN server on the gateway work fine.
Errors: None thus far
Upgraded via "ddup --flash-latest", so far so good. Seems like a improvement over the previous build already. _________________ Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
Router: Asus RT-AC56U
Firmware: DD-WRT v3.0-r31575M kongac (03/21/17)
Kernel: Linux 4.4.52 #270 SMP Tue Mar 21 00:58:10 CET 2017 armv7l
Status: OK
Reset: NO
Errors: NONE
flashed okay I'll post if I have the freezing again like last build.
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r31575M kongac (03/21/17)
Kernel Version Linux 4.4.52 #270 SMP Tue Mar 21 00:58:10 CET 2017 armv7
Updated from 31520M by GUI, did not reset nvram (it was reset and manually entered for 31520M).
WAN, dual band WiFi plus 2.4GHz guest network, static IP's, dnsmasg, VPN with policy based routing and firewall killswitch, dnscrypt, dnssec, port forwarding, QoS, ...
Up for 4 hours, no errors.
EDIT: this morning, VPN status showed TUN/TAP write bytes 0, no internet through VPN. Same issue seen in previous builds.
... and, command 'egrep' is missing, had to modify my backup script to instead use 'grep -E'.
Last edited by kallsop on Wed Mar 22, 2017 15:15; edited 2 times in total
Router Model: Netgear R7000
Current Firmware: DD-WRT v3.0-r31520M kongac
Previous Firmware: DD-WRT v3.0-r31160M kongac
Reset: No
Upgrade method: web UI
Errors: Hard lock within 18 hours of upgrade
I've been experiencing hard lockups with v3.0-r31160M kongac and was hoping that v3.0-r31160M kongac would solve the problem, but I experienced a hard lockup less than one day after upgrading. Power cycle solved the issue, as it did in the previous version.
Syslog shows:
Dec 31 16:00:15 DD-WRT kern.info kernel: pci 0000:00:11.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
Router Model: Netgear R7000
Firmware Build: DD-WRT v3.0-r31575M kongac (03/21/17)
Previous Build: DD-WRT v3.0-r31205M kongac (02/03/17)
Previous Kernel: Linux 4.4.45 #248 SMP Fri Feb 3 11:11:57 CET 2017 armv7l
New Kernel Version: Linux 4.4.52 #270 SMP Tue Mar 21 00:58:10 CET 2017 armv7l
Reset: No
Status: updated via ddup --flash-latest
Errors: None so far
up for ~2 hours, no issues. I was getting intermittent lockups (about once per month) and what looked like wireless shutdown and restart (router uptime didn't change but all wireless devices lost connectivity for about 30 seconds) about once every week or two on the old build. Hopefully this one addresses whatever was causing that.
Router Model: Netgear R8000
Firmware Build: DD-WRT v3.0-r31575M kongac (03/21/17)
Previous Build: DD-WRT v3.0-r31205M kongac (02/03/17)
Previous Kernel: Linux 4.4.45 #248 SMP Fri Feb 3 11:11:57 CET 2017 armv7l
New Kernel Version: Linux 4.4.52 #270 SMP Tue Mar 21 00:58:10 CET 2017 armv7l
Reset: No
Status: updated via ddup --flash-latest
Errors: Useage None so far however, Only thing is prior to the last update, I used the nvram backup and restore scripts with no issue.
I was trying to use this after the update and now get egrep: not found.
Has this had egrep removed? I've searched around and can't see anything.
Router: Netgear R6250
Firmware: DD-WRT v3.0-r31575M kongac (03/21/17)
Kernel: Linux 4.4.52 #270 SMP Tue Mar 21 00:58:10 CET 2017 armv7l
Status: The router stops working after some time (+/-20 hours)
Reset: No
Errors: Yes, out of memory bug (hard lockups).
This error was also present in the previous releases + current Brainslayer release.
Flashed back to a stable release without this error: DD-WRT v3.0-r31050M kongac (01/01/17)
Router Model: Netgear R8000
Firmware Build: DD-WRT v3.0-r31575M kongac (03/21/17)
Previous Build: DD-WRT v3.0-r31250M kongac
New Kernel Version: Linux 4.4.52 #270 SMP Tue Mar 21 00:58:10 CET 2017 armv7l
Reset: No
Status: updated via ddup --flash-unattended
Errors: None so far
enabled autoupdate and waited 2 days. it did not update. not sure if autoupdate has been implemented or is just been added to gui for future. did ddup via ddup --flash-unattended as this is what autoupdate should be doing.
KONG, please let us know the status of autoupdate and how to use it.
using vpn via PIA. all seems to be working so far.
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r31575M kongac (03/21/17)
Kernel Version Linux 4.4.52 #270 SMP Tue Mar 21 00:58:10 CET 2017 armv7l
reset:no
status:operational
errors: none so far
via ddup --flash-latest
curious to hear more information about the new automatic updates option
Router: R7000
Status: Working
Reset: No
Errors: None
Upgraded from previous release. Using features static wan, dhcp lan, qos, port forwarding, sshd, ntp, dnscrypt,both radios, link aggregation.
Router: Netgear R7000
Firmware: v3.0-r31575M kongac (03/21/17)
Kernel: Linux 4.4.52 #270 SMP Tue Mar 21 00:58:10 CET 2017 armv7l
Status: Up and running for just under 24 hours
Reset: Soft boot before and after ddup
Errors: Missing Syslog messages
Upgraded via ddup --flash-latest from r31570M. No 'erase nvram' this time.
I have Log Management enabled and Log Level set to High. Syslog is no longer showing dropped and rejected connections, but standard log messages such as system notifications and dnsmasq messages still appear. This issue first appeared with version r31570M.
The temperatures are good: CPU 53.6 °C / WL0 46.0 °C / WL1 46.6 °C (My R7000 is wall-mounted.)
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- LAN DHCP Enabled
- IPv4 only
- No VLANS
- Wireless: Regulatory Domain = UNITED_STATES, wl0 NG-Mixed (ch. 7 + 5), wl1 NA-Mixed (ch. 161 + 159), AES
- SNMP enabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: remote to Logentries
- YAMon 3.1
- USB Flashdrive mounted as JFFS, adblocking via pixelserv
- NO: ttraf, VNC, Zabbix, VPN, Radius
- NO: Port forwarding, UPnP, DMZ, QoS
- NO: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Joined: 26 Dec 2013 Posts: 37 Location: Indiana, USA
Posted: Wed Mar 22, 2017 14:41 Post subject:
On my r8000, after 24 hours of 31575 I seen my wifi cameras went offline. Wasn't able to do further testing but a router reboot brought them back. I don't think I've had that on the last few builds, although I feel the last few builds I've had, people note strange little connectivity issues and such that a quick reboot fixed, so I've been rebooting occasionally. It's been awhile since I've had a build that's felt stable with more than a week of up time.
But... with occasionally rebooting them.. my 6300v2, r7000, and r8000 have been working well =)
All have fairly basic static setups besides the r8000 has some isolated guest networks. _________________ R8000~Kong R7000~Kong R6300v2~Kong WNDR3700v4~BS
Router Model DLink 890L A2
Firmware Version DD-WRT v3.0-r31575M kongac (03/21/17)
Kernel Version 4.4.52 #270 SMP Tue Mar 21 00:58:10 CET 2017 armv7l DD-WRT
reset:no
status:operational
errors: none so far
ddup --flash-remote
Up running here almost a day. Only thing I changed in my settings was to disable the "No DNS Rebind" was getting a lot of:
Quote:
possible DNS-rebind attack detected:
in my syslog, otherwise logfile looked good. OpenVPN working, DNSCrypt working, firewall working.
Router: Netgear R6250
Firmware: DD-WRT v3.0-r31575M kongac (03/21/17)
Kernel: Linux 4.4.52 #270 SMP Tue Mar 21 00:58:10 CET 2017 armv7l
Status: The router stops working after some time (+/-20 hours)
Reset: No
Errors: Yes, out of memory bug (hard lockups).
This error was also present in the previous releases + current Brainslayer release.
Flashed back to a stable release without this error: DD-WRT v3.0-r31050M kongac (01/01/17)
How come did you flash current BS build if anything newer than 30432 bricks R6250? _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
