Kong build DD-WRT v3.0-r33010M 2nd release kongac (09/15/17)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 293
Location: Bakersfield, CA

PostPosted: Sat Sep 16, 2017 19:02    Post subject: Kong build DD-WRT v3.0-r33010M 2nd release kongac (09/15/17) Reply with quote
NEW Kong's, build has been released: DD-WRT v3.0-r33010M kongac (09/15/17)
Kernel Version: Linux 4.4.87 #439 SMP Fri Sep 15 16:41:44 CEST 2017 armv7l

http://desipro.de/ddwrt/K3-AC-Arm/TEST/

Changelog:
https://www.dd-wrt.com/phpBB2/viewtopic.php?t=279467
http://svn.dd-wrt.com/timeline

Your reports for Broadcom units are highly appreciated!
Router:
Firmware:
Previous:
Kernel:
Status:
Reset:
Errors:

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29621_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________

Deployed Routers:
Netgear R7000 - 3x Kong's 40270M (Gateway: USB /w Entware, Stubby, DoT & DoH, QoS)
Linksys E3000 - 2x build 41218M (Client Bridges)
Linksys E900 - 1x build 40723M (Work Client)

Spares/Backups/Collection:
Too many to list. I have old routers, bricked routers, weird routers. You name it.
Sponsor
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 293
Location: Bakersfield, CA

PostPosted: Sat Sep 16, 2017 19:13    Post subject: Reply with quote
Router: 2x Netgear R7000
Firmware: DD-WRT v3.0-r33010M kongac (09/15/17)
Previous: A couple builds back, forgot to save the exact one. Whoops! Shocked
Kernel: Linux 4.4.87 #439 SMP Fri Sep 15 16:41:44 CEST 2017 armv7l
Status: Working so far. Only been up a few minutes though.
Reset: No, flashed via ddup --flash-latest
Errors: None thus far.

dnsmasq: okay.
OpenVPN Server: okay.
USB Automount: okay.
Speedtests: full ISP speed we pay for.

So far it seems pretty solid. I'll post back if I run into any issues with it. The web GUI is responding fast and stable. So far so good. Smile

_________________

Deployed Routers:
Netgear R7000 - 3x Kong's 40270M (Gateway: USB /w Entware, Stubby, DoT & DoH, QoS)
Linksys E3000 - 2x build 41218M (Client Bridges)
Linksys E900 - 1x build 40723M (Work Client)

Spares/Backups/Collection:
Too many to list. I have old routers, bricked routers, weird routers. You name it.
james1795
DD-WRT User


Joined: 11 Jan 2011
Posts: 158

PostPosted: Sat Sep 16, 2017 19:24    Post subject: R8000 Reply with quote
Router: R8000
Firmware: DD-WRT v3.0-r33010M kongac (09/15/17) According to dd-wrt SVN this is (09/03/17)
Previous: 8/9/17
Kernel: Linux 4.4.87 #439 SMP Fri Sep 15 16:41:44 CEST 2017 armv7l
Status: Working
Reset: Yes
Errors: None thus far.
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 293
Location: Bakersfield, CA

PostPosted: Sat Sep 16, 2017 19:37    Post subject: Re: R8000 Reply with quote
james1795 wrote:

Firmware: DD-WRT v3.0-r33010M kongac (09/15/17) According to dd-wrt SVN this is (09/03/17)


Yeah, I saw another thread with that date. If this is a repeat thread with just a different date, I apologize. I just saw a new date and no new thread, so I posted one.

_________________

Deployed Routers:
Netgear R7000 - 3x Kong's 40270M (Gateway: USB /w Entware, Stubby, DoT & DoH, QoS)
Linksys E3000 - 2x build 41218M (Client Bridges)
Linksys E900 - 1x build 40723M (Work Client)

Spares/Backups/Collection:
Too many to list. I have old routers, bricked routers, weird routers. You name it.
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1404
Location: Canada

PostPosted: Sat Sep 16, 2017 21:51    Post subject: Reply with quote
Kong 33010M Release Aug-09-2017 MD5 is 2d973c080db6c2295ce1772084989e56 dd-wrt.v24-K3_AC_ARM_STD.bin

Kong 33010M Release Sep-16-2017 MD5 is 9050e98e69a88c662b26dbe244b1cf85 dd-wrt.v24-K3_AC_ARM_STD.bin

There must be new changes to Build 33010M.

_________________
Home Network on Telus PureFibre - Wired GigaBit Backbone
2x R7800 - Gateway WiFi 3xVPN - KONGAT 39855M
E3000 - Gateway Wired IPTV - DDWRT r35531 Mega
WHR-HP-G54 - Internal Routing - DDWRT r35531 std-special

______________________
Off Site 1

R7000 - Gateway & WiFi & VPN - KONGAC 39855M
WRT610Nv1 - Repeater Bridge - DDWRT r33679 Mega K2.4

__________________________
Off Site 2

R7000 - Gateway & WiFi - KONGAC 39855M
4x E3000 - Gateway & 3xWDS Wired IPTV - DDWRT r35531 Mega
E2000 - IPTV PVR Blocker - DDWRT r35531 Mega

__________________
YAMon 3.4 | Ad-Blocking for DD-WRT | DNSCrypt-Proxy V2
CloneVince
DD-WRT User


Joined: 31 May 2014
Posts: 219

PostPosted: Sat Sep 16, 2017 21:58    Post subject: Reply with quote
Updated with
Code:
ddup --flash-remote http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/dd-wrt.v24-K3_AC_ARM_STD.bin


All seems fine, thx Kong Smile

BTW, repo updated.

_________________
Unofficial Kong's release repository : http://ddwrt-kong.clonevince.fr/
-XPTO-
DD-WRT User


Joined: 20 Jan 2014
Posts: 52

PostPosted: Sun Sep 17, 2017 1:28    Post subject: Astrill applet error Reply with quote
Astrill applet doesn't get IP addresses from servers with this release (OpenVPN?) on R8000. Reverted back to the 08/09 33010 release and it is all fine again.
eywong
DD-WRT User


Joined: 21 Jul 2010
Posts: 120
Location: USA

PostPosted: Sun Sep 17, 2017 16:11    Post subject: Asus RT-AC68U Reply with quote
Router: Asus RT-AC68U (H/W Ver: A1)
Firmware: DD-WRT v3.0-r33010M kongac (09/15/17)
Previous: DD-WRT v3.0-r33010M kongac (08/09/17)
Kernel: Linux 4.4.87 #439 SMP Fri Sep 15 16:41:44 CEST 2017 armv7l
Previous: Linux 4.4.80 #422 SMP Wed Aug 9 20:13:10 CEST 2017 armv7l
Status: ok
Reset: no (ddup --flash-remote http://desipro.de/ddwrt/K3-AC-Arm/TEST/dd-wrt.v24-K3_AC_ARM_STD.bin)
Errors: no
Uptime: 9:36
james1795
DD-WRT User


Joined: 11 Jan 2011
Posts: 158

PostPosted: Sun Sep 17, 2017 22:30    Post subject: R8000 Reply with quote
After a day up had over 300k receive errors. Nothing special enabled. Rebooted it to see if it does the same thing. If it does it again will revert back to build 8/9/17.
ddaniel51
DD-WRT Guru


Joined: 19 Feb 2013
Posts: 1312

PostPosted: Mon Sep 18, 2017 1:39    Post subject: Reply with quote
Using R8500's as AP's with dhcp forwarding and getting this in Syslog every 2 minutes.

Sep 16 16:54:00 R8500_2 user.info : dhcpfwd : dhcp forwarder daemon successfully started
Sep 16 16:56:00 R8500_2 user.info : dhcpfwd : dhcp forwarder daemon successfully started
Sep 16 16:58:00 R8500_2 user.info : dhcpfwd : dhcp forwarder daemon successfully started
Sep 16 17:00:01 R8500_2 user.info : dhcpfwd : dhcp forwarder daemon successfully started
Sep 16 17:02:00 R8500_2 user.info : dhcpfwd : dhcp forwarder daemon successfully started
Sep 16 17:04:00 R8500_2 user.info : dhcpfwd : dhcp forwarder daemon successfully started
Sep 16 17:06:00 R8500_2 user.info : dhcpfwd : dhcp forwarder daemon successfully started

_________________
Segment 1 R9000 10Gb LAN, 1Gb ISP BS
Test Bed R9000 10Gb LAN
Wired AP 1 R9000 10Gb LAN
Wired AP 2 R9000 1Gb LAN
Wired AP 3 R9000 1Gb LAN
Test Bed R7800 1Gb LAN OpenWRT Kong
www.desipro.de/openwrt/ (Kong's)
YAMon usage-
www.monitoring.com/manualInstall.php
dahosepipe
DD-WRT Novice


Joined: 24 Mar 2015
Posts: 20

PostPosted: Mon Sep 18, 2017 6:04    Post subject: Reply with quote
mac913 wrote:
Kong 33010M Release Aug-09-2017 MD5 is 2d973c080db6c2295ce1772084989e56 dd-wrt.v24-K3_AC_ARM_STD.bin

Kong 33010M Release Sep-16-2017 MD5 is 9050e98e69a88c662b26dbe244b1cf85 dd-wrt.v24-K3_AC_ARM_STD.bin

There must be new changes to Build 33010M.


Anyone know what the new changes are for Sep-16? I'm running Aug-09 33010M Shocked
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1404
Location: Canada

PostPosted: Mon Sep 18, 2017 14:58    Post subject: Reply with quote
dahosepipe wrote:
mac913 wrote:
Kong 33010M Release Aug-09-2017 MD5 is 2d973c080db6c2295ce1772084989e56 dd-wrt.v24-K3_AC_ARM_STD.bin

Kong 33010M Release Sep-16-2017 MD5 is 9050e98e69a88c662b26dbe244b1cf85 dd-wrt.v24-K3_AC_ARM_STD.bin

There must be new changes to Build 33010M.


Anyone know what the new changes are for Sep-16? I'm running Aug-09 33010M :shock:


I checked the changelog I haven't seen any updates from Kong. Only Kong knows what the difference/changes are.

I'm staying the the August Release since I have over 30 days of uptime.

Update...

Seen these changes at the above posts.....

Kernel: Linux 4.4.87 #439 SMP Fri Sep 15 16:41:44 CEST 2017 armv7l
Previous: Linux 4.4.80 #422 SMP Wed Aug 9 20:13:10 CEST 2017 armv7l

_________________
Home Network on Telus PureFibre - Wired GigaBit Backbone
2x R7800 - Gateway WiFi 3xVPN - KONGAT 39855M
E3000 - Gateway Wired IPTV - DDWRT r35531 Mega
WHR-HP-G54 - Internal Routing - DDWRT r35531 std-special

______________________
Off Site 1

R7000 - Gateway & WiFi & VPN - KONGAC 39855M
WRT610Nv1 - Repeater Bridge - DDWRT r33679 Mega K2.4

__________________________
Off Site 2

R7000 - Gateway & WiFi - KONGAC 39855M
4x E3000 - Gateway & 3xWDS Wired IPTV - DDWRT r35531 Mega
E2000 - IPTV PVR Blocker - DDWRT r35531 Mega

__________________
YAMon 3.4 | Ad-Blocking for DD-WRT | DNSCrypt-Proxy V2
two4six
DD-WRT Novice


Joined: 17 Mar 2011
Posts: 16

PostPosted: Mon Sep 18, 2017 19:10    Post subject: Reply with quote
I didn't dig into the detail too much, but it looks like some of the Linux kernel changes (such as those between Linux 4.4.80 and 4.4.87) are described here in some detail:

https://www.kernel.org/pub/linux/kernel/v4.x/

It's a bit more than I can process. Kong would be the one to explain why he chose to keep the same DD-WRT version with the updated Kernel...

One guess on why he updated the kernel is the Linux (and other) Bluetooth vulnerabilities that were noted in articles such as this one at Ars Technica:

https://arstechnica.com/information-technology/2017/09/bluetooth-bugs-open-billions-of-devices-to-attacks-no-clicking-required/

Just guessing though...

mac913 wrote:
dahosepipe wrote:
mac913 wrote:
Kong 33010M Release Aug-09-2017 MD5 is 2d973c080db6c2295ce1772084989e56 dd-wrt.v24-K3_AC_ARM_STD.bin

Kong 33010M Release Sep-16-2017 MD5 is 9050e98e69a88c662b26dbe244b1cf85 dd-wrt.v24-K3_AC_ARM_STD.bin

There must be new changes to Build 33010M.


Anyone know what the new changes are for Sep-16? I'm running Aug-09 33010M Shocked


I checked the changelog I haven't seen any updates from Kong. Only Kong knows what the difference/changes are.

I'm staying the the August Release since I have over 30 days of uptime.

Update...

Seen these changes at the above posts.....

Kernel: Linux 4.4.87 #439 SMP Fri Sep 15 16:41:44 CEST 2017 armv7l
Previous: Linux 4.4.80 #422 SMP Wed Aug 9 20:13:10 CEST 2017 armv7l
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4354
Location: Germany

PostPosted: Mon Sep 18, 2017 20:12    Post subject: Reply with quote
Changes are:

-dnsmasq crash/security fix for CVE-2017-13704
-kernel fixes
-removed softether as it is not compatible with latest openssl anymore, but added a new ipsec server that uses certs, just a few clicks and you can setup vpn ikev2 with iOS or Win7, allowing to connect to your home network or tunnel all traffic through the vpn, no ipsec client support yet

I do not have time right now to sync with latest svn, thus just kept the tested revision and only added the security fixes.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
-XPTO-
DD-WRT User


Joined: 20 Jan 2014
Posts: 52

PostPosted: Tue Sep 19, 2017 3:09    Post subject: Reply with quote
<Kong> wrote:
Changes are:

-dnsmasq crash/security fix for CVE-2017-13704
-kernel fixes
-removed softether as it is not compatible with latest openssl anymore, but added a new ipsec server that uses certs, just a few clicks and you can setup vpn ikev2 with iOS or Win7, allowing to connect to your home network or tunnel all traffic through the vpn, no ipsec client support yet

I do not have time right now to sync with latest svn, thus just kept the tested revision and only added the security fixes.


Maybe that affected Astrill VPN applet Sad
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum