DD-WRT :: View topic - Possible to exclude some devices from vpn pptp tunnel ?

Possible to exclude some devices from vpn pptp tunnel ?

DD-WRT Forum Index -> Advanced Networking

Goto page 1, 2 Next

View previous topic :: View next topic

Author

Message

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Tue Feb 14, 2017 21:02 Post subject: Possible to exclude some devices from vpn pptp tunnel ?

Hi all
I recently set up vpn pptp on my router and wanted to know if it was possible to have certain ip's to not be connected to the vpn pptp tunnel.
I personally use PIA VPN pptp tunnel ( Services - VPN - pptp client)
So my goal is to have some my devices connected to the vpn pptp tunnel and others with my isp IP for example my security camera
Any comments are appreciated.

Modem tp link TD-W8960N bridge
Router: Buffalo WZR-HP-G450H Firmware Version
DD-WRT v24-sp2 (06/05/15) std - build 27240

Sponsor

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Tue Feb 14, 2017 22:44 Post subject:

eibgrad wrote:

....That's called PBR ....

....mille grazie ..mi metto subito al lavoro
Shocked

....many thanks ..I put to work immediately

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Wed Feb 15, 2017 20:35 Post subject:

eibgrad wrote:

....http://pastebin.com/tssTvC5Q...... # specify destination ip(s)/network(s) to route over the WAN (one per line)

Hi Eibgrad

if You have a security camera or a notebook or a satellite decoder what ip would you use ?

Embarassed

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Wed Feb 15, 2017 22:36 Post subject:

eibgrad wrote:

What ever you or DHCP assigned to it!..

eibgrad wrote:

# specify source ip(s)/network(s)/interface(s) to route over the WAN (one
# per line)
192.168.1.107 # mary's laptop

# specify destination ip(s)/network(s) to route over the WAN (one per line)

192.168.1.107 # mary's laptop

is correct ?

Confused

egc
DD-WRT Guru

Joined: 18 Mar 2014
Posts: 12906
Location: Netherlands

Posted: Thu Feb 16, 2017 13:50 Post subject:

If that is the IP address the DHCP server handed out then yes.

However it is better to set a static lease for this client on the Services/Services/DHCP server/static lease
When the laptop is connected you can find the MAC address on the Status/Lan page.
Assign an IP address outside of the scope of the DHCP server (the scope can be found on the Setup/Basic setup page under DHCP server, the start address is default 192.168.1.100 and the Maximum DHCP users is default 50, so the scope is from 100-150
So start assigining static leases at 192.168.1.10 Smile

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Fri Feb 17, 2017 7:51 Post subject:
@eibgrad @egc Many thanks! Now I have to learn how to write the eibgrad's script in /jffs. I hope do not to mess and brick my router

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Fri Feb 17, 2017 10:07 Post subject:
..first attempt: failure therefore I enabled jffs I copied the script in: administration / command and save startup SRC_NET = " 192.168.2.10 # Room 192.168.2.11 # notebook " DST_NET = " 192.168.2.11 # notebook 192.168.2.10 # Room " but if https://ww.ipchicken.cm/ is PIA's IP

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Mon Feb 20, 2017 23:15 Post subject:
Hello again is possible to achieve the goal through hardware ?

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Tue Feb 21, 2017 23:33 Post subject:

eibgrad wrote:

... You seem to be making this more complex than it really is.....

you surely right
I'm not familiar with managing a router
I tried to put the your script but i have not managed to make it work.
you can tell me the link to the wiki where I can understand the procedure to

eibgrad wrote:

..then store it in jffs. Then call it from jffs in the startup script...

I thank you very much for the help you are giving me

Very Happy

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Wed Feb 22, 2017 0:32 Post subject:

This is in administration/command/startup

no ddns

for only few seconds i see my isp ip on 192.168.2.37

then PIA's IP return..

where am I wrong Question

Alexja wrote:

ifconfig `nvram get wan_ifname`:0 192.168.1.4 netmask 255.255.255.0

#!/bin/sh
set -x
(
SRC_NET="192.168.2.37"
#DST_NET=""

# ---------------------- DO NOT CHANGE BELOW THIS LINE ----------------------- #

TID="200"

while [ -z "$(nvram get pptp_get_ip)" ]; do sleep 10; done;
while ! ip route show | grep "$(nvram get pptp_get_ip)"; do sleep 10; done
sleep 3

ip route flush table $TID > /dev/null 2>&1

ip route show | grep -Ev '^default|^0.0.0.0/1|^128.0.0.0/1' \
| while read route; do
ip route add $route table $TID
done

ip route add default via $(nvram get wan_gateway) table $TID

ip route flush cache

OIFS="$IFS"; IFS=$'\n'
for src in $SRC_NET; do

if ! echo $src | grep -Eq '^[[:space:]]*#'; then

src="$(echo $src | grep -Eo '^[^#]*' | awk '{$1=$1}{print}')"

if echo $src | grep -Eq '([0-9]{1,3}\.){3}[0-9]{1,3}'; then

ip rule del from $src table $TID > /dev/null 2>&1
ip rule add from $src table $TID
else

ip rule del iif $src table $TID > /dev/null 2>&1
ip rule add iif $src table $TID
fi
fi
done
IFS="$OIFS"

OIFS="$IFS"; IFS=$'\n'
for dst in $DST_NET; do

if ! echo $dst | grep -Eq '^[[:space:]]*#'; then

dst="$(echo $dst | grep -Eo '^[^#]*' | awk '{$1=$1}{print}')"
# delete before adding to prevent dups
ip rule del to $dst table $TID > /dev/null 2>&1
ip rule add to $dst table $TID
fi
done
IFS="$OIFS"

ip route show table $TID
ip rule list

) 2>&1 | logger -t $(basename $0)[$$] &

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Thu Feb 23, 2017 23:01 Post subject:

eibgrad wrote:

https://www.dd-wrt.com/wiki/index.php/JFFS

thanks

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Sat Feb 25, 2017 1:04 Post subject:

eibgrad wrote:

Code:

cat /var/log/messages

DD-WRT v24-sp2 std (c) 2015 NewMedia-NET GmbH
Release: 06/05/15 (SVN revision: 27240)

DD-WRT login: root
Password:
==========================================================

____ ___ __ ______ _____ ____ _ _
| _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |
|| | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_
||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|
|___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|

DD-WRT v24-sp2
http://www.dd-wrt.com

==========================================================

BusyBox v1.23.2 (2015-06-05 01:26:11 CEST) built-in shell (ash)

root@DD-WRT:~# http://www.dd-wrt.com
-sh: http://www.dd-wrt.com: not found
root@DD-WRT:~#
root@DD-WRT:~# cat /var/log/messages
Jan 1 01:00:08 DD-WRT syslog.info syslogd started: BusyBox v1.23.2
Jan 1 00:00:08 DD-WRT user.info : klogd : klog daemon successfully started
Jan 1 00:00:08 DD-WRT kern.notice kernel: klogd started: BusyBox v1.23.2 (2015-06-05 01:26:11 CEST)
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.000000] Linux version 3.10.80-rc1 (root@dd-wrt) (gcc version 5.1.0 (OpenWrt GCC 5.1.0 r45886) ) #2982 Fri Jun 5 01:26:00 CEST 2015
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] sys id = 1101 Atheros AR7242 rev 1.1 (0x1101)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] Determined physical RAM map:
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] memory: 04000000 @ 00000000 (usable)
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Zone ranges:
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Movable zone start for each node
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Early memory node ranges
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] On node 0 totalpages: 16384
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 80340fa0, node_mem_map 81000000
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 128 pages used for memmap
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] Memory: 61024k/65536k available (2459k kernel code, 4512k reserved, 580k data, 220k init, 0k highmem)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] NR_IRQS:83
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.080000] pid_max: default: 32768 minimum: 301
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.080000] Mount-cache hash table entries: 512
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.090000] NET: Registered protocol family 16
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.100000] found calibration data for slot 0 on 0xBF050000
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.100000] Found empty mac address in calibration dataset, leave the responsibility to the driver to use the correct one
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.110000] Found empty mac address in dataset, leave the responsibility to the driver to use the correct one
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.120000] registering PCI controller with io_map_base unset
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.140000] bio: create slab <bio-0> at 0
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.150000] usbcore: registered new interface driver usbfs
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.150000] usbcore: registered new interface driver hub
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.160000] usbcore: registered new device driver usb
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.160000] PCI host bridge to bus 0000:00
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.170000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.170000] pci_bus 0000:00: root bus resource [io 0x0000]
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.180000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.180000] pci 0000:00:00.0: [168c:0030] type 00 class 0x028000
Jan 1 00:00:08 DD-WRT kern.emerg kernel: [ 0.180000] detected swapped eeprom data
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.190000] pci 0000:00:00.0: fixup device configuration
Jan 1 00:00:08 DD-WRT kern.emerg kernel: [ 0.190000] bootstrap returns device 168C:30
Jan 1 00:00:08 DD-WRT kern.emerg kernel: [ 0.200000] move calibration data offset 12288
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.200000] pci 0000:00:00.0: reg 10: [mem 0x10000000-0x1001ffff 64bit]
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.200000] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.200000] pci 0000:00:00.0: supports D1
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.200000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.200000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.200000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.210000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.210000] pci 0000:00:00.0: using irq 72 for pin 1
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.220000] Switching to clocksource MIPS
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.220000] NET: Registered protocol family 2
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.230000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.230000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.240000] TCP: Hash tables configured (established 512 bind 512)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.240000] TCP: reno registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.250000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.250000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.260000] NET: Registered protocol family 1
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.260000] PCI: CLS 0 bytes, default 32
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.260000] gpio_proc: module loaded and /proc/gpio/ created
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.270000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.280000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.290000] msgmni has been set to 119
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.290000] io scheduler noop registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.290000] io scheduler deadline registered (default)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.300000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.330000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.330000] console [ttyS0] enabled, bootconsole disabled
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.350000] check spi banks 2
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.350000] 0000 : EF 40 18
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.350000] found W25Q128BV device on bank#0
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.360000] 0000 : EF 40 18
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.360000] found W25Q128BV device on bank#1
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.360000] SPI flash size total:32 Mbytes
Jan 1 00:00:08 DD-WRT kern.emerg kernel: [ 0.440000]
Jan 1 00:00:08 DD-WRT kern.emerg kernel: [ 0.440000] found squashfs at 179000
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.450000] Creating 9 MTD partitions on "ar7240-nor0":
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.450000] 0x000000000000-0x000000050000 : "RedBoot"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.460000] 0x000000060000-0x000001fe0000 : "linux"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.470000] 0x000000179000-0x0000019b0000 : "rootfs"
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.470000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.490000] mtd: partition "rootfs" set to be root filesystem
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.490000] 0x0000019b0000-0x000001fe0000 : "ddwrt"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.500000] 0x000001fe0000-0x000001ff0000 : "nvram"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.500000] 0x000001ff0000-0x000002000000 : "FIS directory"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.510000] 0x000001ff0000-0x000002000000 : "board_config"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.520000] 0x000000000000-0x000002000000 : "fullflash"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.530000] 0x000000040000-0x000000050000 : "uboot-env"
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.530000] tun: Universal TUN/TAP device driver, 1.6
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.540000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.550000] ar71xx: pll_reg 0xb805002c: 0x62000000
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.750000] PPP generic driver version 2.4.2
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.750000] PPP BSD Compression module registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.760000] PPP Deflate Compression module registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.760000] PPP MPPE Compression module registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.770000] NET: Registered protocol family 24
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.780000] u32 classifier
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.790000] Performance counters on
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.790000] input device check on
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.800000] Actions configured
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.800000] Netfilter messages via NETLINK v0.30.
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.800000] nf_conntrack version 0.5.0 (953 buckets, 3812 max)
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.810000] nf_conntrack_rtsp v0.6.21 loading
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.810000] nf_nat_rtsp v0.6.21 loading
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.820000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.820000] TCP: westwood registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.830000] TCP: hybla registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.830000] TCP: vegas registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.830000] NET: Registered protocol family 17
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.840000] Bridge firewalling registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.840000] 8021q: 802.1Q VLAN Support v1.8
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.850000] searching for nvram
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.850000] nvram size = 0
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.930000] Atheros AR71xx hardware watchdog driver version 0.1.0
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.930000] ar71xx-wdt: timeout=15 secs (max=21) ref freq=200000000
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.950000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.950000] Freeing unused kernel memory: 220K (80359000 - 80390000)
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 4.270000] ar71xx-wdt: enabling watchdog timer
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 4.330000] switch0: Atheros AR8316 rev. 1 switch registered on ag71xx-mdio.0
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 4.330000] libphy: ag71xx_mdio: probed
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 4.890000] ar8316: Using port 4 as switch port
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 4.890000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd041, driver=Atheros AR8216/AR8236/AR8316]
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 4.910000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.260000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.270000] Backport generated by backports.git backports-20150129-0-gdd4a670
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.450000] cfg80211: Calling CRDA to update world regulatory domain
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.470000] cfg80211: World regulatory domain updated:
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.470000] cfg80211: DFS Master region: unset
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.470000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.480000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.490000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.500000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.510000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.520000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.520000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 6.380000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.390000] ath: EEPROM regdomain: 0x0
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.390000] ath: EEPROM indicates default country code should be used
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.390000] ath: doing EEPROM country->regdmn map search
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.390000] ath: country maps to regdmn code: 0x3a
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.390000] ath: Country alpha2 being used: US
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.390000] ath: Regpair used: 0x3a
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.410000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.410000] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xb0000000, irq=72
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.420000] cfg80211: Calling CRDA for country: US
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.420000] cfg80211: Regulatory domain changed to country: US
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.430000] cfg80211: DFS Master region: FCC
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.430000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.440000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.450000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.460000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.460000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.470000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.900000] eth0: link up (1000Mbps/Full duplex)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 8.910000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 1 is up
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 8.910000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 8.920000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 3 is up
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 8.930000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 4 is up
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 8.930000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 5 is up
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 8.940000] lzma_compress: module license 'unspecified' taints kernel.
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 8.950000] Disabling lock debugging due to kernel taint
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 9.090000] jffs2: version 2.2. (NAND) (LZMA) (CMODE_SIZE) © 2001-2006 Red Hat, Inc.
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 9.910000] device br0 entered promiscuous mode
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.060000] device vlan1 entered promiscuous mode
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.070000] device eth0 entered promiscuous mode
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.090000] br0: port 1(vlan1) entered forwarding state
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.090000] br0: port 1(vlan1) entered forwarding state
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.100000] device br0 left promiscuous mode
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.110000] device br0 entered promiscuous mode
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.170000] cfg80211: Calling CRDA to update world regulatory domain
Jan 1 00:00:08 DD-WRT kern.err kernel: [ 10.190000] cfg80211: Invalid regulatory domain detected:
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.200000] cfg80211: Regulatory domain: 00
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.200000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.210000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.220000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.230000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.240000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.240000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.250000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.280000] cfg80211: Calling CRDA to update world regulatory domain
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.290000] cfg80211: World regulatory domain updated:
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.300000] cfg80211: DFS Master region: unset
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.300000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.310000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.320000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.330000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.330000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.340000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.350000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.380000] cfg80211: Calling CRDA for country: CA
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.380000] cfg80211: Regulatory domain changed to country: CA
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.390000] cfg80211: DFS Master region: FCC
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.390000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.400000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.410000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.420000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2400 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.430000] cfg80211: (5490000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 2400 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.440000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 13.780000] device ath0 entered promiscuous mode
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 14.410000] br0: port 2(ath0) entered forwarding state
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 14.410000] br0: port 2(ath0) entered forwarding state
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 14.500000] device br0 left promiscuous mode
Jan 1 00:00:08 DD-WRT user.info : dnsmasq : dnsmasq daemon successfully started
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 15.530000] device vlan2 entered promiscuous mode
Jan 1 00:00:08 DD-WRT user.info : cron : cron daemon successfully started
Jan 1 00:00:08 DD-WRT cron.info cron[913]: (CRON) STARTUP (fork ok)
Jan 1 00:00:08 DD-WRT cron.info cron[913]: (crontabs) ORPHAN (no passwd entry)
Jan 1 00:00:09 DD-WRT kern.info kernel: [ 16.720000] device vlan2 left promiscuous mode
Jan 1 00:00:11 DD-WRT daemon.notice pppd[1002]: pppd 2.4.7 started by root, uid 0
Jan 1 00:00:11 DD-WRT user.info : ppp_redial : redial process successfully started
Jan 1 00:00:11 DD-WRT user.info : ttraff : traffic counter daemon successfully started
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + SRC_NET=192.168.2.37
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + TID=200
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + nvram get pptp_get_ip
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + [ -z 87.*.***.** ]
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + ip route show
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + nvram get pptp_get_ip
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + grep 87.*.***.**
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + sleep 10
Jan 1 00:00:12 DD-WRT user.info : klogd : kernel log daemon successfully stopped
Jan 1 00:00:12 DD-WRT kern.notice kernel: klogd: exiting
Jan 1 00:00:12 DD-WRT user.info : syslogd : syslog daemon successfully stopped
Jan 1 01:00:12 DD-WRT syslog.info syslogd exiting
Jan 1 01:00:12 DD-WRT syslog.info syslogd started: BusyBox v1.23.2
Jan 1 00:00:12 DD-WRT kern.notice kernel: klogd started: BusyBox v1.23.2 (2015-06-05 01:26:11 CEST)
Jan 1 00:00:12 DD-WRT user.info : reset button : resetbutton daemon successfully started
Jan 1 00:00:14 DD-WRT kern.info kernel: [ 21.360000] xt_CT: No such helper "ddtb"
Jan 1 00:00:14 DD-WRT kern.info kernel: [ 21.370000] xt_CT: No such helper "ddtb"
Jan 1 00:00:14 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Jan 1 00:00:15 DD-WRT user.info : process_monitor successfully started
Jan 1 00:00:15 DD-WRT user.info : wland : WLAN daemon successfully stopped
Jan 1 00:00:15 DD-WRT user.info : wland : WLAN daemon successfully started
Jan 1 00:00:15 DD-WRT user.info : WAN is up. IP: 79.**.**.**
Jan 1 00:00:18 DD-WRT kern.info kernel: [ 25.120000] br0: port 1(vlan1) entered forwarding state
Feb 25 01:33:32 DD-WRT user.info : cron : cron daemon successfully stopped
Feb 25 01:33:33 DD-WRT daemon.debug process_monitor[1322]: Restarting cron (time sync change)
Feb 25 01:33:33 DD-WRT daemon.debug process_monitor[1322]: We need to re-update after 3600 seconds
Feb 25 01:33:33 DD-WRT daemon.info process_monitor[1322]: set timer: 3600 seconds, callback: ntp_main()
Feb 25 01:33:33 DD-WRT cron.info cron[1340]: (CRON) STARTUP (fork ok)
Feb 25 01:33:33 DD-WRT user.info : cron : cron daemon successfully started
Feb 25 01:33:33 DD-WRT cron.info cron[1340]: (crontabs) ORPHAN (no passwd entry)
Feb 25 01:33:33 DD-WRT kern.info kernel: [ 29.440000] br0: port 2(ath0) entered forwarding state
Feb 25 01:33:37 DD-WRT user.debug : ttraff: data collection started
Feb 25 01:33:44 DD-WRT daemon.notice pppd[1373]: pppd 2.4.7 started by root, uid 0
Feb 25 01:33:47 DD-WRT kern.info kernel: [ 43.360000] xt_CT: No such helper "ddtb"
Feb 25 01:33:47 DD-WRT kern.info kernel: [ 43.380000] xt_CT: No such helper "ddtb"
Feb 25 01:33:47 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Feb 25 01:34:00 DD-WRT cron.info cron[1340]: (crontabs) ORPHAN (no passwd entry)
Feb 25 01:34:01 DD-WRT daemon.info hostapd: ath0: STA 18:5e:0f:db:5b:c8 IEEE 802.11: authenticated
Feb 25 01:34:01 DD-WRT daemon.info hostapd: ath0: STA 18:5e:0f:db:5b:c8 IEEE 802.11: associated (aid 1)
Feb 25 01:34:01 DD-WRT daemon.info hostapd: ath0: STA 18:5e:0f:db:5b:c8 RADIUS: starting accounting session 00000007-00000000
Feb 25 01:34:01 DD-WRT daemon.info hostapd: ath0: STA 18:5e:0f:db:5b:c8 WPA: pairwise key handshake completed (RSN)
Feb 25 01:34:05 DD-WRT kern.info kernel: [ 61.040000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Feb 25 01:35:09 DD-WRT auth.info login[1630]: root login on 'pts/1'
Feb 25 01:35:21 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 IEEE 802.11: authenticated
Feb 25 01:35:21 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 IEEE 802.11: associated (aid 2)
Feb 25 01:35:21 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 RADIUS: starting accounting session 00000007-00000001
Feb 25 01:35:21 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 WPA: pairwise key handshake completed (RSN)
root@DD-WRT:~#

Thanks Exclamation

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Sat Feb 25, 2017 8:53 Post subject:

eibgrad wrote:

That dump doesn't indicate the PPTP client connection has even been established. It has to at least get connected before the script will complete execution and reroute the traffic to the WAN.

Hello again

Now is 9.50 am

I'm connect with my notebook ( 192.168.2.37) to :

Your IP Address: 159.***.***.*** • Your ISP: SoftLayer Technologies • You are protected by PIA •

This is the dump

DD-WRT v24-sp2 std (c) 2015 NewMedia-NET GmbH
Release: 06/05/15 (SVN revision: 27240)

DD-WRT login: root
Password:
==========================================================

____ ___ __ ______ _____ ____ _ _
| _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |
|| | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_
||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|
|___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|

DD-WRT v24-sp2
http://www.dd-wrt.com

==========================================================

BusyBox v1.23.2 (2015-06-05 01:26:11 CEST) built-in shell (ash)

root@DD-WRT:~# cat /var/log/messages
Jan 1 01:00:08 DD-WRT syslog.info syslogd started: BusyBox v1.23.2
Jan 1 00:00:08 DD-WRT user.info : klogd : klog daemon successfully started
Jan 1 00:00:08 DD-WRT kern.notice kernel: klogd started: BusyBox v1.23.2 (2015-06-05 01:26:11 CEST)
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.000000] Linux version 3.10.80-rc1 (root@dd-wrt) (gcc version 5.1.0 (OpenWrt GCC 5.1.0 r45886) ) #2982 Fri Jun 5 01:26:00 CEST 2015
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] sys id = 1101 Atheros AR7242 rev 1.1 (0x1101)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] Determined physical RAM map:
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] memory: 04000000 @ 00000000 (usable)
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Zone ranges:
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Movable zone start for each node
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Early memory node ranges
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] On node 0 totalpages: 16384
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 80340fa0, node_mem_map 81000000
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 128 pages used for memmap
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] Memory: 61024k/65536k available (2459k kernel code, 4512k reserved, 580k data, 220k init, 0k highmem)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.000000] NR_IRQS:83
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.080000] pid_max: default: 32768 minimum: 301
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.080000] Mount-cache hash table entries: 512
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.090000] NET: Registered protocol family 16
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.100000] found calibration data for slot 0 on 0xBF050000
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.100000] Found empty mac address in calibration dataset, leave the responsibility to the driver to use the correct one
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.110000] Found empty mac address in dataset, leave the responsibility to the driver to use the correct one
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.120000] registering PCI controller with io_map_base unset
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.140000] bio: create slab <bio-0> at 0
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.150000] usbcore: registered new interface driver usbfs
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.150000] usbcore: registered new interface driver hub
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.160000] usbcore: registered new device driver usb
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.160000] PCI host bridge to bus 0000:00
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.170000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.170000] pci_bus 0000:00: root bus resource [io 0x0000]
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.180000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.180000] pci 0000:00:00.0: [168c:0030] type 00 class 0x028000
Jan 1 00:00:08 DD-WRT kern.emerg kernel: [ 0.180000] detected swapped eeprom data
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.190000] pci 0000:00:00.0: fixup device configuration
Jan 1 00:00:08 DD-WRT kern.emerg kernel: [ 0.190000] bootstrap returns device 168C:30
Jan 1 00:00:08 DD-WRT kern.emerg kernel: [ 0.200000] move calibration data offset 12288
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.200000] pci 0000:00:00.0: reg 10: [mem 0x10000000-0x1001ffff 64bit]
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.200000] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.200000] pci 0000:00:00.0: supports D1
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.200000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.200000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.200000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.210000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.210000] pci 0000:00:00.0: using irq 72 for pin 1
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.220000] Switching to clocksource MIPS
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.220000] NET: Registered protocol family 2
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.230000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.230000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.240000] TCP: Hash tables configured (established 512 bind 512)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.240000] TCP: reno registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.250000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.250000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.260000] NET: Registered protocol family 1
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.260000] PCI: CLS 0 bytes, default 32
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.260000] gpio_proc: module loaded and /proc/gpio/ created
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.270000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.280000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.290000] msgmni has been set to 119
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.290000] io scheduler noop registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.290000] io scheduler deadline registered (default)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.300000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.330000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.330000] console [ttyS0] enabled, bootconsole disabled
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.350000] check spi banks 2
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.350000] 0000 : EF 40 18
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.350000] found W25Q128BV device on bank#0
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.360000] 0000 : EF 40 18
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.360000] found W25Q128BV device on bank#1
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.360000] SPI flash size total:32 Mbytes
Jan 1 00:00:08 DD-WRT kern.emerg kernel: [ 0.440000]
Jan 1 00:00:08 DD-WRT kern.emerg kernel: [ 0.440000] found squashfs at 179000
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.450000] Creating 9 MTD partitions on "ar7240-nor0":
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.450000] 0x000000000000-0x000000050000 : "RedBoot"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.460000] 0x000000060000-0x000001fe0000 : "linux"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.470000] 0x000000179000-0x0000019b0000 : "rootfs"
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.470000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.490000] mtd: partition "rootfs" set to be root filesystem
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.490000] 0x0000019b0000-0x000001fe0000 : "ddwrt"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.500000] 0x000001fe0000-0x000001ff0000 : "nvram"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.500000] 0x000001ff0000-0x000002000000 : "FIS directory"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.510000] 0x000001ff0000-0x000002000000 : "board_config"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.520000] 0x000000000000-0x000002000000 : "fullflash"
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.530000] 0x000000040000-0x000000050000 : "uboot-env"
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.530000] tun: Universal TUN/TAP device driver, 1.6
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.540000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 0.550000] ar71xx: pll_reg 0xb805002c: 0x62000000
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.750000] PPP generic driver version 2.4.2
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.750000] PPP BSD Compression module registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.760000] PPP Deflate Compression module registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.760000] PPP MPPE Compression module registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.770000] NET: Registered protocol family 24
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.780000] u32 classifier
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.790000] Performance counters on
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.790000] input device check on
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.800000] Actions configured
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.800000] Netfilter messages via NETLINK v0.30.
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.800000] nf_conntrack version 0.5.0 (953 buckets, 3812 max)
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.810000] nf_conntrack_rtsp v0.6.21 loading
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 0.810000] nf_nat_rtsp v0.6.21 loading
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.820000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.820000] TCP: westwood registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.830000] TCP: hybla registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.830000] TCP: vegas registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.830000] NET: Registered protocol family 17
Jan 1 00:00:08 DD-WRT kern.notice kernel: [ 0.840000] Bridge firewalling registered
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.840000] 8021q: 802.1Q VLAN Support v1.8
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.850000] searching for nvram
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.850000] nvram size = 0
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.930000] Atheros AR71xx hardware watchdog driver version 0.1.0
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.930000] ar71xx-wdt: timeout=15 secs (max=21) ref freq=200000000
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.950000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 0.950000] Freeing unused kernel memory: 220K (80359000 - 80390000)
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 4.270000] ar71xx-wdt: enabling watchdog timer
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 4.330000] switch0: Atheros AR8316 rev. 1 switch registered on ag71xx-mdio.0
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 4.330000] libphy: ag71xx_mdio: probed
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 4.890000] ar8316: Using port 4 as switch port
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 4.890000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd041, driver=Atheros AR8216/AR8236/AR8316]
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 4.910000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.260000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.270000] Backport generated by backports.git backports-20150129-0-gdd4a670
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.450000] cfg80211: Calling CRDA to update world regulatory domain
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.470000] cfg80211: World regulatory domain updated:
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.470000] cfg80211: DFS Master region: unset
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.470000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.480000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.490000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.500000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.510000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.520000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 5.520000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 6.380000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.390000] ath: EEPROM regdomain: 0x0
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.390000] ath: EEPROM indicates default country code should be used
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.390000] ath: doing EEPROM country->regdmn map search
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.390000] ath: country maps to regdmn code: 0x3a
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.390000] ath: Country alpha2 being used: US
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.390000] ath: Regpair used: 0x3a
Jan 1 00:00:08 DD-WRT kern.debug kernel: [ 6.410000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.410000] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xb0000000, irq=72
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.420000] cfg80211: Calling CRDA for country: US
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.420000] cfg80211: Regulatory domain changed to country: US
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.430000] cfg80211: DFS Master region: FCC
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.430000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.440000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.450000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.460000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.460000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.470000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 6.900000] eth0: link up (1000Mbps/Full duplex)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 8.910000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 1 is up
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 8.910000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 8.920000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 3 is up
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 8.930000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 4 is up
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 8.930000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 5 is up
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 8.940000] lzma_compress: module license 'unspecified' taints kernel.
Jan 1 00:00:08 DD-WRT kern.warn kernel: [ 8.950000] Disabling lock debugging due to kernel taint
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 9.090000] jffs2: version 2.2. (NAND) (LZMA) (CMODE_SIZE) © 2001-2006 Red Hat, Inc.
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 9.910000] device br0 entered promiscuous mode
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.060000] device vlan1 entered promiscuous mode
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.070000] device eth0 entered promiscuous mode
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.090000] br0: port 1(vlan1) entered forwarding state
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.090000] br0: port 1(vlan1) entered forwarding state
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.100000] device br0 left promiscuous mode
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.110000] device br0 entered promiscuous mode
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.170000] cfg80211: Calling CRDA to update world regulatory domain
Jan 1 00:00:08 DD-WRT kern.err kernel: [ 10.190000] cfg80211: Invalid regulatory domain detected:
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.200000] cfg80211: Regulatory domain: 00
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.200000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.210000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.220000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.230000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.240000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.240000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.250000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.280000] cfg80211: Calling CRDA to update world regulatory domain
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.290000] cfg80211: World regulatory domain updated:
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.300000] cfg80211: DFS Master region: unset
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.300000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.310000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.320000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.330000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.330000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.340000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.350000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.380000] cfg80211: Calling CRDA for country: CA
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.380000] cfg80211: Regulatory domain changed to country: CA
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.390000] cfg80211: DFS Master region: FCC
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.390000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.400000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.410000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.420000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2400 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.430000] cfg80211: (5490000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 2400 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 10.440000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 13.780000] device ath0 entered promiscuous mode
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 14.410000] br0: port 2(ath0) entered forwarding state
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 14.410000] br0: port 2(ath0) entered forwarding state
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 14.500000] device br0 left promiscuous mode
Jan 1 00:00:08 DD-WRT user.info : dnsmasq : dnsmasq daemon successfully started
Jan 1 00:00:08 DD-WRT kern.info kernel: [ 15.530000] device vlan2 entered promiscuous mode
Jan 1 00:00:08 DD-WRT user.info : cron : cron daemon successfully started
Jan 1 00:00:08 DD-WRT cron.info cron[913]: (CRON) STARTUP (fork ok)
Jan 1 00:00:08 DD-WRT cron.info cron[913]: (crontabs) ORPHAN (no passwd entry)
Jan 1 00:00:09 DD-WRT kern.info kernel: [ 16.720000] device vlan2 left promiscuous mode
Jan 1 00:00:11 DD-WRT daemon.notice pppd[1002]: pppd 2.4.7 started by root, uid 0
Jan 1 00:00:11 DD-WRT user.info : ppp_redial : redial process successfully started
Jan 1 00:00:11 DD-WRT user.info : ttraff : traffic counter daemon successfully started
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + SRC_NET=192.168.2.37
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + TID=200
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + nvram get pptp_get_ip
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + [ -z 87.*.***.** ]
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + ip route show
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + nvram get pptp_get_ip
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + grep 87.*.***.**
Jan 1 00:00:11 DD-WRT user.notice .rc_startup[1021]: + sleep 10
Jan 1 00:00:12 DD-WRT user.info : klogd : kernel log daemon successfully stopped
Jan 1 00:00:12 DD-WRT kern.notice kernel: klogd: exiting
Jan 1 00:00:12 DD-WRT user.info : syslogd : syslog daemon successfully stopped
Jan 1 01:00:12 DD-WRT syslog.info syslogd exiting
Jan 1 01:00:12 DD-WRT syslog.info syslogd started: BusyBox v1.23.2
Jan 1 00:00:12 DD-WRT kern.notice kernel: klogd started: BusyBox v1.23.2 (2015-06-05 01:26:11 CEST)
Jan 1 00:00:12 DD-WRT user.info : reset button : resetbutton daemon successfully started
Jan 1 00:00:14 DD-WRT kern.info kernel: [ 21.360000] xt_CT: No such helper "ddtb"
Jan 1 00:00:14 DD-WRT kern.info kernel: [ 21.370000] xt_CT: No such helper "ddtb"
Jan 1 00:00:14 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Jan 1 00:00:15 DD-WRT user.info : process_monitor successfully started
Jan 1 00:00:15 DD-WRT user.info : wland : WLAN daemon successfully stopped
Jan 1 00:00:15 DD-WRT user.info : wland : WLAN daemon successfully started
Jan 1 00:00:15 DD-WRT user.info : WAN is up. IP: 79.**.***.**
Jan 1 00:00:18 DD-WRT kern.info kernel: [ 25.120000] br0: port 1(vlan1) entered forwarding state
Feb 25 01:33:32 DD-WRT user.info : cron : cron daemon successfully stopped
Feb 25 01:33:33 DD-WRT daemon.debug process_monitor[1322]: Restarting cron (time sync change)
Feb 25 01:33:33 DD-WRT daemon.debug process_monitor[1322]: We need to re-update after 3600 seconds
Feb 25 01:33:33 DD-WRT daemon.info process_monitor[1322]: set timer: 3600 seconds, callback: ntp_main()
Feb 25 01:33:33 DD-WRT cron.info cron[1340]: (CRON) STARTUP (fork ok)
Feb 25 01:33:33 DD-WRT user.info : cron : cron daemon successfully started
Feb 25 01:33:33 DD-WRT cron.info cron[1340]: (crontabs) ORPHAN (no passwd entry)
Feb 25 01:33:33 DD-WRT kern.info kernel: [ 29.440000] br0: port 2(ath0) entered forwarding state
Feb 25 01:33:37 DD-WRT user.debug : ttraff: data collection started
Feb 25 01:33:44 DD-WRT daemon.notice pppd[1373]: pppd 2.4.7 started by root, uid 0
Feb 25 01:33:47 DD-WRT kern.info kernel: [ 43.360000] xt_CT: No such helper "ddtb"
Feb 25 01:33:47 DD-WRT kern.info kernel: [ 43.380000] xt_CT: No such helper "ddtb"
Feb 25 01:33:47 DD-WRT user.info : vpn modules : vpn modules successfully unloaded
Feb 25 01:34:00 DD-WRT cron.info cron[1340]: (crontabs) ORPHAN (no passwd entry)
Feb 25 01:34:01 DD-WRT daemon.info hostapd: ath0: STA 18:5e:0f:db:5b:c8 IEEE 802.11: authenticated
Feb 25 01:34:01 DD-WRT daemon.info hostapd: ath0: STA 18:5e:0f:db:5b:c8 IEEE 802.11: associated (aid 1)
Feb 25 01:34:01 DD-WRT daemon.info hostapd: ath0: STA 18:5e:0f:db:5b:c8 RADIUS: starting accounting session 00000007-00000000
Feb 25 01:34:01 DD-WRT daemon.info hostapd: ath0: STA 18:5e:0f:db:5b:c8 WPA: pairwise key handshake completed (RSN)
Feb 25 01:34:05 DD-WRT kern.info kernel: [ 61.040000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Feb 25 01:35:09 DD-WRT auth.info login[1630]: root login on 'pts/1'
Feb 25 01:35:21 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 IEEE 802.11: authenticated
Feb 25 01:35:21 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 IEEE 802.11: associated (aid 2)
Feb 25 01:35:21 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 RADIUS: starting accounting session 00000007-00000001
Feb 25 01:35:21 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 WPA: pairwise key handshake completed (RSN)
Feb 25 02:33:32 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 WPA: group key handshake completed (RSN)
Feb 25 03:33:32 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 WPA: group key handshake completed (RSN)
Feb 25 04:33:32 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 WPA: group key handshake completed (RSN)
Feb 25 05:33:32 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 WPA: group key handshake completed (RSN)
Feb 25 06:33:32 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 WPA: group key handshake completed (RSN)
Feb 25 07:33:32 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 WPA: group key handshake completed (RSN)
Feb 25 08:33:32 DD-WRT daemon.info hostapd: ath0: STA bc:44:86:9e:8b:29 WPA: group key handshake completed (RSN)
Feb 25 08:35:50 DD-WRT daemon.info hostapd: ath0: STA 18:5e:0f:db:5b:c8 IEEE 802.11: authenticated
Feb 25 08:35:50 DD-WRT daemon.info hostapd: ath0: STA 18:5e:0f:db:5b:c8 IEEE 802.11: associated (aid 1)
Feb 25 08:35:50 DD-WRT daemon.info hostapd: ath0: STA 18:5e:0f:db:5b:c8 RADIUS: starting accounting session 00000007-00000002
Feb 25 08:35:50 DD-WRT daemon.info hostapd: ath0: STA 18:5e:0f:db:5b:c8 WPA: pairwise key handshake completed (RSN)
Feb 25 08:42:39 DD-WRT auth.info login[15871]: root login on 'pts/1'
root@DD-WRT:~#

Thanks

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Mon Feb 27, 2017 21:52 Post subject:

eibgrad wrote:

Putting aside for the moment the issue of redirecting traffic over the WAN. Are you 100% sure the PPTP client is connected to the PIA PPTP server?

...yes i'm sure: my ip change

I see my ISP's IP in: Administration

Firmware: DD-WRT v24-sp2 (06/05/15) std

Time: 22:44:12 up 1 day, 22:02, load average: 0.11, 0.08, 0.12

WAN IP: 87.**.*.***

If i go ht*ps://w*w.ipchicken.c*m/ I see 159.***.***.***

Confused

Alexja
DD-WRT Novice

Joined: 31 Jan 2017
Posts: 22

Posted: Mon Feb 27, 2017 22:01 Post subject:

eibgrad wrote:

.... I know many publicly available PPTP servers won't work unless you use PPTP over the WAN (Setup->Basic Setup->WAN Connection Type->PPTP) because they require that packet reordering be enabled, which is only an option on the Setup page, not the Services tab.

Please
see this link: is my pptp provider

https://www.privateinternetaccess.com/pages/client-support/dd-wrt-pptp (dead link, PIA no longer supports PPTP?)

Thanks

Goto page 1, 2 Next

Display posts from previous:

Page 1 of 2

DD-WRT Forum Index -> Advanced Networking

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Log in

Possible to exclude some devices from vpn pptp tunnel ?

Quick Links

Log in