WRT600N tracert exploit with stock Linksys firmware

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... 12, 13, 14 ... 19, 20, 21  Next
Author Message
crackrock
DD-WRT Novice


Joined: 27 Apr 2008
Posts: 11

PostPosted: Sat May 10, 2008 18:55    Post subject: Reply with quote
I guess an issue should be logged in the bugtracker to add that trailer to the DD-WRT firmware.

I see the issue about the broken LAN ports (http://www.dd-wrt.com/dd-wrtv2/bugtracker/view.php?id=3055) is not assigned to anyone, this is a major bug. Anyone with a WRT600N and DD-WRT have the LAN ports working?
Sponsor
greedj
DD-WRT Novice


Joined: 17 Nov 2007
Posts: 49
Location: Grand Rapids, MI

PostPosted: Sun May 11, 2008 5:03    Post subject: Reply with quote
crackrock wrote:
I guess an issue should be logged in the bugtracker to add that trailer to the DD-WRT firmware.

I see the issue about the broken LAN ports (http://www.dd-wrt.com/dd-wrtv2/bugtracker/view.php?id=3055) is not assigned to anyone, this is a major bug. Anyone with a WRT600N and DD-WRT have the LAN ports working?


WRT600N v1.1 March 2008, LAN Ports Not Working. Sad
Firmware: DD-WRT v24 RC-7 04/24/08 mega
bigbambo
DD-WRT User


Joined: 08 Jan 2008
Posts: 69

PostPosted: Sun May 11, 2008 21:27    Post subject: Reply with quote
i've got version 1.0 (purchased 1/08)

everything works fine for me (besides the well documented 5ghz issues)

clearly the issues users are having now relate to linksys changing something from v 1.0 to v 1.1
radiowave
DD-WRT User


Joined: 21 Apr 2008
Posts: 230
Location: Riding the 802.11 waves...

PostPosted: Mon May 12, 2008 0:59    Post subject: Reply with quote
bigbambo wrote:
i've got version 1.0 (purchased 1/0Cool
clearly the issues users are having now relate to linksys changing something from v 1.0 to v 1.1


I wonder if it was a good or bad change?
sharo
DD-WRT User


Joined: 22 Nov 2007
Posts: 63

PostPosted: Mon May 12, 2008 11:13    Post subject: Reply with quote
greedj wrote:

WRT600N v1.1 March 2008, LAN Ports Not Working. Sad
Firmware: DD-WRT v24 RC-7 04/24/08 mega

And what about LEDs, does they working properly?
malmo
DD-WRT User


Joined: 13 May 2008
Posts: 138

PostPosted: Tue May 13, 2008 11:56    Post subject: LAN/WAN device BCM5397 in V1.0 and BCM5395 in V1.1 Reply with quote
Can someone who have open his V11 (manufactred in march) see what LAN/WAN chip is used? I red somwere what Browdcom have ended BCM5397 support becose they started seling another one. What is the new LAN chip? i think it is the chip in the V11 processor
MaZe
DD-WRT Novice


Joined: 23 Apr 2008
Posts: 14

PostPosted: Tue May 13, 2008 23:08    Post subject: Reply with quote
I posted dumps from the appropriate /proc/cpuinfo from wrt's firmware on my 2008 v1.1 router somewhere earlier on in this thread. Would that not be enough?
malmo
DD-WRT User


Joined: 13 May 2008
Posts: 138

PostPosted: Thu May 15, 2008 14:31    Post subject: New Swich in vertion V1.1 (it start comming with buil5) Reply with quote
As someone write nvram dump from built 5 with is compactible with new hardware so you can see "switch_type=BCM5395". The WRT600N V1.0 had a BCM5397. The new swich is werse,it's a standard swich (and is not managet and no Jumbo frames, i think). Have someone new driver for BCM5395?

Link to BCM5395 http://www.broadcom.com/products/BCM5395

Ling to BCM5397 http://www.broadcom.com/products/BCM5397

hire is product breith for BCM4705
http://www.broadcom.com/collateral/pb/4705-PB00-R.pdf
jaminmc
DD-WRT Novice


Joined: 20 Sep 2006
Posts: 17

PostPosted: Thu May 15, 2008 21:55    Post subject: Re: New Swich in vertion V1.1 (it start comming with buil5) Reply with quote
I don't know about a driver, but I wouldn;t say it is any worse based on the specs. On the BCM5395 page there is a product brief pdf that expands the features. Check it out: http://www.broadcom.com/collateral/pb/5395-PB00-R.pdf
It has jumbo, QOS, Vlan double tagging and everything.
malmo wrote:
As someone write nvram dump from built 5 with is compactible with new hardware so you can see "switch_type=BCM5395". The WRT600N V1.0 had a BCM5397. The new swich is werse,it's a standard swich (and is not managet and no Jumbo frames, i think). Have someone new driver for BCM5395?

Link to BCM5395 http://www.broadcom.com/products/BCM5395

Ling to BCM5397 http://www.broadcom.com/products/BCM5397

hire is product breith for BCM4705
http://www.broadcom.com/collateral/pb/4705-PB00-R.pdf
radiowave
DD-WRT User


Joined: 21 Apr 2008
Posts: 230
Location: Riding the 802.11 waves...

PostPosted: Thu May 22, 2008 3:52    Post subject: Reply with quote
Just keeping this thread alive.....
alankligman
DD-WRT Novice


Joined: 21 Apr 2008
Posts: 9

PostPosted: Thu May 22, 2008 22:57    Post subject: Reply with quote
There's also some discussion going on in: http://www.dd-wrt.com/phpBB2/viewtopic.php?p=175197&sid=40164b103a564ab6fc8a083c3a6eebd1
greedj
DD-WRT Novice


Joined: 17 Nov 2007
Posts: 49
Location: Grand Rapids, MI

PostPosted: Sat May 31, 2008 2:29    Post subject: Re: New Swich in vertion V1.1 (it start comming with buil5) Reply with quote
malmo wrote:
As someone write nvram dump from built 5 with is compactible with new hardware so you can see "switch_type=BCM5395". The WRT600N V1.0 had a BCM5397. The new swich is werse,it's a standard swich (and is not managet and no Jumbo frames, i think). Have someone new driver for BCM5395?

Link to BCM5395 http://www.broadcom.com/products/BCM5395

Ling to BCM5397 http://www.broadcom.com/products/BCM5397

hire is product breith for BCM4705
http://www.broadcom.com/collateral/pb/4705-PB00-R.pdf


I think the BCM5395 does support jumbo frames.

Quote from PDF file. (See link below)
Performance
• 9 Kbyte jumbo frame support—wire speed performance for all frame sizes.


http://www.broadcom.com/collateral/pb/5395-PB00-R.pdf
radiowave
DD-WRT User


Joined: 21 Apr 2008
Posts: 230
Location: Riding the 802.11 waves...

PostPosted: Sun Jun 01, 2008 15:36    Post subject: Reply with quote
Transient wrote:
shurik wrote:
attached is the result. Can you see if the dump is indeed complete?


Good news! I was able to successfully extract your "build 5" firmware trx using firmware_mod_kit.


Transient....can you post the build 5 bin extracted bin file?
CaScAdE
DD-WRT Guru


Joined: 18 Jun 2006
Posts: 1110
Location: Kiel (54.4247,10.1721)

PostPosted: Mon Jun 02, 2008 18:20    Post subject: Reply with quote
someone out there got the serial port working?
i somehow misflashed one of mine and now i can send files using tftp but it won't flash...
similar to stuff i had with one of my 350n.
would be cool to gain serial access to the cfe and maybe
flash -noheader : flash1.trx
will work just like it did for the 350N devices...

_________________
DD-WRT F.A.Q.

Webcam Kiel
jmh9072
DD-WRT Guru


Joined: 04 Sep 2007
Posts: 800
Location: Ohio

PostPosted: Mon Jun 02, 2008 19:38    Post subject: Reply with quote
CaScAdE wrote:
someone out there got the serial port working?
i somehow misflashed one of mine and now i can send files using tftp but it won't flash...
similar to stuff i had with one of my 350n.
would be cool to gain serial access to the cfe and maybe
flash -noheader : flash1.trx
will work just like it did for the 350N devices...

If you have a v1.1, did you flash a trailed file? For example, the file I posted here or the official firmware v1.01.36 build 3?

_________________
WRT54G v3 - v24 r14471M NEWD Eko - AP
WRT350N v1.0
WRT600N v1.1 - halfway there!
Se7en is Darker...


Last edited by jmh9072 on Mon Jun 02, 2008 21:16; edited 1 time in total
Goto page Previous  1, 2, 3 ... 12, 13, 14 ... 19, 20, 21  Next Display posts from previous:    Page 13 of 21
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum