Dual Router PIA VPN for Fire TV

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
shooter_mcgavins
DD-WRT Novice


Joined: 28 Nov 2016
Posts: 2

PostPosted: Wed Nov 30, 2016 5:49    Post subject: Dual Router PIA VPN for Fire TV Reply with quote
Trying to get Private Internet Anywhere (PIA) setup for a Fire TV.

This is the configuration I have http://www.dd-wrt.com/wiki/index.php/Image:Repeater_Bridge.jpg

Essentially everything works fine on the same ip address range 192.168.0.* across primary and secondary router. I need this because I have devices (printers, NAS) and such on the primary router that I need accessible from the secondary router. On the secondary router I have ATV, DirecTV, (everything else) and also have a PC that has PIA VPN installed and it works fine so I know I can VPN thru it. The other device that I'm now trying to connect on the secondary router is this Fire TV. It also works fine thru secondary router but I'd like it to have PIA VPN. I tried the PIA APK on Fire TV but their support says it will not work on that device natively, so I've given in to having install the PIA VPN on the secondary router itself. Doing this will make all devices on the secondary router be VPN internet and such. But I also need them to be able to connect to devices on primary router.

Any thoughts/ideas, please advise, thanks?
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6239
Location: Netherlands

PostPosted: Wed Nov 30, 2016 9:23    Post subject: Reply with quote
I am sorry that I can not give you specific instructions, but you could try the following:
Setup VPN on you secondary router, you can restrict the VPN to a range of IP addresses e.g. 192.168.0.80 - 192.168.0.89. Set your TV with a static IP address in this range, so it will go through the VPN.
Other clients will get an IP address of the DHCP server which normally starts at 192.168.0.100 so outside the afore mentioned range and therefore will not go through the VPN.
Hope this helps

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum