New Kong's build: DD-WRT 30700M - 09/27/2016

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10  Next
Author Message
CloneVince
DD-WRT User


Joined: 31 May 2014
Posts: 219

PostPosted: Tue Sep 27, 2016 18:52    Post subject: New Kong's build: DD-WRT 30700M - 09/27/2016 Reply with quote
Kong's DD-WRT build 30700M - 09/27/2016 has been released: http://desipro.de/ddwrt/K3-AC-Arm/

Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29440_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
Unofficial Kong's release repository : http://ddwrt-kong.clonevince.fr/
Sponsor
Acumen
DD-WRT User


Joined: 15 Nov 2014
Posts: 221

PostPosted: Tue Sep 27, 2016 19:44    Post subject: Reply with quote
Router Model: Netgear R6400
Firmware Version: DD-WRT v3.0-r30700M kongac (09/27/16)
Kernel Version: Linux 4.4.22 #126 SMP Tue Sep 27 11:11:40 CEST 2016 armv7l
Flash: Webflash from r30695M
Reset: 'Reset to default settings' on upgrade
Errors:
  • WPA2-Enterprise on FreeRadius not working, using Synology Radius it does.
    Code:
    Related syslog on boot:
    Jan  1 00:00:19 R6400 user.info : radiusd : FreeRadius daemon successfully started
    Jan  1 00:00:21 R6400 daemon.err radiusd[1125]: libssl version mismatch.  built: 1000208f linked: 100020af
    This only happens when you actually have a certificate generated. Without settings on jssf2, it does start.

_________________
Netgear WNDR4300v1 DD-WRT v3.0 BS r29837 | Netgear R6400 DD-WRT v3.0 KB r33525M | Tickets: 5429
IPv4 & IPv6-PD | ProFTP & Samba to USB thumb | DNSMasq DHCPv6 | Pi-Hole on RasPi

Found a bug, report it so the it can be fixed: http://svn.dd-wrt.com/
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4339
Location: Germany

PostPosted: Tue Sep 27, 2016 20:24    Post subject: Reply with quote
Due to the openssl radiusd error report I'm currently doing a full clean and rebuild in order to make sure any app that linked against openssl is troublefree.

Thus there will be updated 30700 builds shortly showing up.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
Acumen
DD-WRT User


Joined: 15 Nov 2014
Posts: 221

PostPosted: Tue Sep 27, 2016 20:31    Post subject: Reply with quote
I will test as soon as I see a new version.
_________________
Netgear WNDR4300v1 DD-WRT v3.0 BS r29837 | Netgear R6400 DD-WRT v3.0 KB r33525M | Tickets: 5429
IPv4 & IPv6-PD | ProFTP & Samba to USB thumb | DNSMasq DHCPv6 | Pi-Hole on RasPi

Found a bug, report it so the it can be fixed: http://svn.dd-wrt.com/
CloneVince
DD-WRT User


Joined: 31 May 2014
Posts: 219

PostPosted: Tue Sep 27, 2016 20:45    Post subject: Reply with quote
@Kong : can I keep the first version or you recommand to delete it ?
My router is already updated, it's better to downgrade or I can keep it until the new build ?

_________________
Unofficial Kong's release repository : http://ddwrt-kong.clonevince.fr/
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4339
Location: Germany

PostPosted: Tue Sep 27, 2016 20:56    Post subject: Reply with quote
CloneVince wrote:
@Kong : can I keep the first version or you recommand to delete it ?
My router is already updated, it's better to downgrade or I can keep it until the new build ?


This problem only affects a handful people, radiusd is probably the only app that is broken in the first 30700 build, as I always clean openvpn when there is an openssl update.

But 30700 is in a very good state now, had some time to do all sorts of tests, thus the full clean makes sure such stupid build problems do not spoil the build:-)

But a full clean is time consuming, even on my 4Ghz i7, thus only do this if I feel it should be done:-)

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
cc999
DD-WRT User


Joined: 20 Feb 2015
Posts: 110

PostPosted: Tue Sep 27, 2016 21:12    Post subject: New Build Reply with quote
<Kong> wrote:
CloneVince wrote:
@Kong : can I keep the first version or you recommand to delete it ?
My router is already updated, it's better to downgrade or I can keep it until the new build ?


This problem only affects a handful people, radiusd is probably the only app that is broken in the first 30700 build, as I always clean openvpn when there is an openssl update.

But 30700 is in a very good state now, had some time to do all sorts of tests, thus the full clean makes sure such stupid build problems do not spoil the build:-)

But a full clean is time consuming, even on my 4Ghz i7, thus only do this if I feel it should be done:-)


Kong please let us know when its available for d/l.

CC
CloneVince
DD-WRT User


Joined: 31 May 2014
Posts: 219

PostPosted: Tue Sep 27, 2016 21:16    Post subject: Reply with quote
@cc999 : new build is available Wink

@Kong : OK, thx for your answer and the new build Smile

_________________
Unofficial Kong's release repository : http://ddwrt-kong.clonevince.fr/
cc999
DD-WRT User


Joined: 20 Feb 2015
Posts: 110

PostPosted: Tue Sep 27, 2016 23:59    Post subject: New Build Reply with quote
CloneVince wrote:
@cc999 : new build is available Wink

@Kong : OK, thx for your answer and the new build Smile


TY.

R8500
erase nvram before and after install

So far perfect. I noticed the RX errors are way down.
Also in my test spot wireless signal is improved to 292 mbps up from 195 mbps in same exact spot.

Now let's see if it goes past the magical 4th day.

Thank You Kong!

CC
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1731
Location: Canada

PostPosted: Wed Sep 28, 2016 0:41    Post subject: Reply with quote
Router: R7000 x2
Firmware: DD-WRT v3.0-r30700M kongac (09/27/16)
Kernel: Linux 4.4.22 #128 SMP Tue Sep 27 22:44:00 CEST 2016 armv7l
Status: Working
Reset: After Upgrade, Erase NVRAM & Manually Configure
Errors: None so far

Upgraded both R7000's from build 30600M with over 16 days uptime.

Other K4.4.x Builds with no issues...
- build 30560M, over 4 days uptime
- build 30465M, over 18 days uptime

UPDATE gone back to Build 30600

UPDATE re-deployed Build 30700

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r48971 Std
R7000 - Wired ISP 4K IPTV Gateway - DDWRT r48971 Std

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r48971 Std
E3000 - Client Bridge - DDWRT r48971 Mini K2.6

Off Site 2

R7000 - Gateway & WiFi - DDWRT r48971 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2


Last edited by mac913 on Mon Oct 03, 2016 18:12; edited 5 times in total
flipper9
Guest





PostPosted: Wed Sep 28, 2016 0:47    Post subject: Reply with quote
Router: R6250 x4 units
Firmware: DD-WRT v3.0-r30700M kongac (09/27/16)
Kernel: Linux 4.4.22 #128 SMP Tue Sep 27 22:44:00 CEST 2016 armv7l
Status: Working
Reset: Did not erase NVRAM
Errors: None so far, seems to be working smoothly as always, routing most devices through OpenVPN service. One R6250 router is configured as the gateway/AP, others are router/AP connected to powerline backbone.
e3000usr
DD-WRT User


Joined: 09 Jul 2014
Posts: 183

PostPosted: Wed Sep 28, 2016 1:17    Post subject: Reply with quote
Router: Asus RT-AC56U
Firmware: DD-WRT v3.0-r30700M kongac (09/27/16)
Kernel: Linux 4.4.22 #128 SMP Tue Sep 27 22:44:00 CEST 2016 armv7l
Status: OK
Reset: NO
Errors: NONE

Thank you Kong since you fixed the instability all the builds have been rock solid for me. I run basic setups, dnsmasq but no wireless or dhcp.
Royal21
DD-WRT Novice


Joined: 28 Sep 2016
Posts: 2

PostPosted: Wed Sep 28, 2016 2:37    Post subject: Reply with quote
Router: Dlink Dir-868L (rev. A)
Firmware: DD-WRT v3.0-r30700M kongac (09/27/16)
Kernel: Linux 4.4.22 #128 SMP Tue Sep 27 22:44:00 CEST 2016 armv7l
Status: failed
Reset: NO
Errors: yes

Router bootlooped. All September released firmware does this. Changed back to 30432.
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4339
Location: Germany

PostPosted: Wed Sep 28, 2016 5:47    Post subject: Reply with quote
Royal21 wrote:
Router: Dlink Dir-868L (rev. A)
Firmware: DD-WRT v3.0-r30700M kongac (09/27/16)
Kernel: Linux 4.4.22 #128 SMP Tue Sep 27 22:44:00 CEST 2016 armv7l
Status: failed
Reset: NO
Errors: yes

Router bootlooped. All September released firmware does this. Changed back to 30432.


Sorry can't really do anything regarding DLink units.

I do not have a single DLink unit. DLink only sends routers to BrainSlayer.

You have to open a ticket for this, so BrainSlayer can look at it.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
spok9
DD-WRT Novice


Joined: 14 Sep 2016
Posts: 14

PostPosted: Wed Sep 28, 2016 6:22    Post subject: Reply with quote
<Kong> wrote:
Royal21 wrote:
Router: Dlink Dir-868L (rev. A)
Firmware: DD-WRT v3.0-r30700M kongac (09/27/16)
Kernel: Linux 4.4.22 #128 SMP Tue Sep 27 22:44:00 CEST 2016 armv7l
Status: failed
Reset: NO
Errors: yes

Router bootlooped. All September released firmware does this. Changed back to 30432.


Sorry can't really do anything regarding DLink units.

I do not have a single DLink unit. DLink only sends routers to BrainSlayer.

You have to open a ticket for this, so BrainSlayer can look at it.


I've been having the same issue, also with this build. There is a ticket for this issue (http://svn.dd-wrt.com/ticket/5518), so hopefully BS will have a change to look into it.
Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10  Next Display posts from previous:    Page 1 of 10
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum