RT-AC68U latest build. Not getting AC speed.

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
novaprospekt216
DD-WRT Novice


Joined: 13 Sep 2016
Posts: 9

PostPosted: Thu Sep 15, 2016 9:09    Post subject: RT-AC68U latest build. Not getting AC speed. Reply with quote
Hello,

I finally managed to change from Tomato Shibby to DD-WRT. It is working flawlessly, however i am unable to achieve wifi AC speed. On Asuswrt and Asuswrt-merlin i was getting as high as 800Mbps but on DD-WRT the wall is on 600Mbps. I have configured dd-wrt as follows:

-Mode: AC-Only (AC/N mixed tested same results)
-VHT80 with lower/upper (tested the 4 modes. no luck)
-Preamble: short
-WPA-2 AES personal
-Country: SPAIN
-802.11h: Loose (Tested off too)
-Beacon: 179 (working flawless on tomato and asuswrt-merlin, so i don't think it has to do with AC :S)
-EVerything else untouched
-Cannot select Manual channel beyond 40Mhz

-Client on same settings as with other firmwares on router (PCE-AC68u)

Any ideas what is going on? I have 4/5 signal strength bars and the link is stable at 600mbps for now.

Thank you very much!
Sponsor
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6182
Location: Romerike, Norway

PostPosted: Thu Sep 15, 2016 9:50    Post subject: Reply with quote
You mean Build 30631?

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=304311
novaprospekt216
DD-WRT Novice


Joined: 13 Sep 2016
Posts: 9

PostPosted: Thu Sep 15, 2016 10:05    Post subject: Reply with quote
Sorry should've posted it, nope was 30605. LOL there is an update... did not even see, i will upgrade this night because i am at work now Sad
Xeon2k8
DD-WRT Guru


Joined: 11 Feb 2016
Posts: 1285

PostPosted: Thu Sep 15, 2016 17:39    Post subject: Reply with quote
novaprospekt216 wrote:
Sorry should've posted it, nope was 30605. LOL there is an update... did not even see, i will upgrade this night because i am at work now Sad


You shouldn't have used it, it's full of bugs. It's clear on the 30605 thread title.
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4339
Location: Germany

PostPosted: Thu Sep 15, 2016 18:02    Post subject: Re: RT-AC68U latest build. Not getting AC speed. Reply with quote
novaprospekt216 wrote:
Hello,

I finally managed to change from Tomato Shibby to DD-WRT. It is working flawlessly, however i am unable to achieve wifi AC speed. On Asuswrt and Asuswrt-merlin i was getting as high as 800Mbps but on DD-WRT the wall is on 600Mbps. I have configured dd-wrt as follows:

-Mode: AC-Only (AC/N mixed tested same results)
-VHT80 with lower/upper (tested the 4 modes. no luck)
-Preamble: short
-WPA-2 AES personal
-Country: SPAIN
-802.11h: Loose (Tested off too)
-Beacon: 179 (working flawless on tomato and asuswrt-merlin, so i don't think it has to do with AC :S)
-EVerything else untouched
-Cannot select Manual channel beyond 40Mhz

-Client on same settings as with other firmwares on router (PCE-AC68u)

Any ideas what is going on? I have 4/5 signal strength bars and the link is stable at 600mbps for now.

Thank you very much!


Try EU regulation domain, Spain is untested only US/EU gets regularly tested.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
novaprospekt216
DD-WRT Novice


Joined: 13 Sep 2016
Posts: 9

PostPosted: Mon Sep 19, 2016 10:08    Post subject: Re: RT-AC68U latest build. Not getting AC speed. Reply with quote
<Kong> wrote:
novaprospekt216 wrote:
Hello,

I finally managed to change from Tomato Shibby to DD-WRT. It is working flawlessly, however i am unable to achieve wifi AC speed. On Asuswrt and Asuswrt-merlin i was getting as high as 800Mbps but on DD-WRT the wall is on 600Mbps. I have configured dd-wrt as follows:

-Mode: AC-Only (AC/N mixed tested same results)
-VHT80 with lower/upper (tested the 4 modes. no luck)
-Preamble: short
-WPA-2 AES personal
-Country: SPAIN
-802.11h: Loose (Tested off too)
-Beacon: 179 (working flawless on tomato and asuswrt-merlin, so i don't think it has to do with AC :S)
-EVerything else untouched
-Cannot select Manual channel beyond 40Mhz

-Client on same settings as with other firmwares on router (PCE-AC68u)

Any ideas what is going on? I have 4/5 signal strength bars and the link is stable at 600mbps for now.

Thank you very much!


Try EU regulation domain, Spain is untested only US/EU gets regularly tested.


That worked m8!! thank you!
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum