Posted: Tue Nov 02, 2021 19:06 Post subject: Static Route behind double NAT
My setup:
DD-WRT router has WAN port connected to another router I do not control (double NAT). That router is connected to the public internet.
DD-WRT router is setup using PPTP which connects to a router at a remote property I own.
All devices that connect to my dd-wrt router successfully connect to my remote router and are able to get internet access through the remote router.
I need to be able to have a device connected to my dd-wrt router connect to the 1st router connected to the internet.
Main router: 192.168.0.1
DD-WRT router: 192.168.1.1
Remote Router: 192.168.2.1
I need device 192.168.1.35 to connect to 192.168.0.50
Please let me know how I can add route in dd-wrt to allow this connect while allowing all other traffic to go through the remote router.
There shouldn't be any need to add a static route for the 192.168.0.0/24 network to the dd-wrt router since the router already knows about that network; it's already in its routing table, and it has to be, since its WAN is defined within the 192.168.0.0/24 network!
If you don't currently have access, it's more likely a firewall issue.