New build is out 30631 (BS) 2016-09-14

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Wed Sep 14, 2016 16:41    Post subject: New build is out 30631 (BS) 2016-09-14 Reply with quote
ftp://ftp.dd-wrt.com/betas/2016/09-14-2016-r30631/

Changelog
https://www.dd-wrt.com/phpBB2/viewtopic.php?t=279467

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 30631_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless.
If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
[I prefer answere in whole sentence]
Sponsor
Newbrain
DD-WRT User


Joined: 28 Dec 2013
Posts: 152

PostPosted: Wed Sep 14, 2016 19:55    Post subject: Asus RT-AC68U & 2 Linksys E2000 Reply with quote
Asus RT-AC68U
asus_rt-ac68u-firmware r30631 (previous r30534)
Kernel: 4.4.21-rc1 #1393 SMP Wed Sep 14 07:07:04 CEST 2016 armv7l DD-WRT
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
5Ghz (Mixed) with 80Mhz channel width: Ok
SSH: Ok
Telnet: Disabled but tested to work
USB 2.0 storage ext3 mount to JFFS: Ok
USB 3.0 storage EXT3 mount to /mnt: Ok
Samba shared drive: Ok
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: No
Status: Ok
Uptime: ~12 Minutes
CPU Temperature: CPU 83.1 °C / WL0 55.2 °C / WL1 53.5 °C

2 x E2000
dd-wrt.v24-30631_NEWD-2_K3.x_mega-e2000 (previous r30534)
Kernel: 3.10.103 #14213 Wed Sep 14 13:08:06 CEST 2016 mips DD-WRT
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled but tested to work
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: No
Status: Ok
Uptime: ~21 minutes
CPU Temperature: WL0 52.0 °C

All devices working as AP's each with individual 1Gb wired connections to main firewall
Bernadoe
DD-WRT User


Joined: 03 Dec 2014
Posts: 217

PostPosted: Wed Sep 14, 2016 20:01    Post subject: Reply with quote
Router: Netgear R7000
Firmware: DD-WRT v3.0-r30631 std (09/14/16)
Kernel: Linux 4.4.21-rc1 #1393 SMP Wed Sep 14 07:07:04 CEST 2016 armv7l
Status: Working
Reset: No
Previous: 30605
Errors: No

CPU 55.8 °C / WL0 46.3 °C / WL1 50.7 °C

[/quote][/quote]


Last edited by Bernadoe on Sat Sep 17, 2016 17:24; edited 2 times in total
samurai01
DD-WRT User


Joined: 26 Feb 2010
Posts: 66
Location: Japan

PostPosted: Wed Sep 14, 2016 23:03    Post subject: Reply with quote
Buffalo WXR-1900DHP

All OK
Didson
DD-WRT Novice


Joined: 14 Sep 2016
Posts: 2

PostPosted: Wed Sep 14, 2016 23:19    Post subject: Reply with quote
Router: Linksys E4200 v1
Firmware: DD-WRT v3.0-r30631 mega (09/14/16)
Kernel: Linux 3.10.103 #14213 Wed Sep 14 13:08:06 CEST 2016 mips
Status: Working
Reset: No
Previous: DD-WRT v3.0-r30605 mega (09/09/16)
Errors: Yes

First value of IP Address and Subnet mask when use Unbridged interface is with range 1-223 instead 0-255 and can't enter
255.255.255.0 subnet mask.
Also after upgrade IP address and subnet mask was
0.0.0.0.


Last edited by Didson on Sun Sep 18, 2016 19:45; edited 1 time in total
eywong
DD-WRT User


Joined: 21 Jul 2010
Posts: 120
Location: USA

PostPosted: Thu Sep 15, 2016 2:44    Post subject: Asus RT-AC68U Reply with quote
Router: Asus RT-AC68U
Firmware: DD-WRT v3.0-r30631 std (09/14/16)
Previous: DD-WRT v3.0-r30605 std (09/09/16)
Kernel: Linux 4.4.21-rc1 #1393 SMP Wed Sep 14 07:07:04 CEST 2016 armv7l
Previous: Linux 4.4.20 #1371 SMP Thu Sep 8 08:44:56 CEST 2016 armv7l
Status: ok
Reset: no
Errors: no

Operating Mode: Gateway
Uptime: 5:24
Temperature: CPU 78.0 °C / WL0 49.7 °C / WL1 52.3 °C

Static Leases: 7 (5 Ethernet; 2 Wireless)
DHCP Server: Enabled
DHCP Daemon: DNSMasq
Static Routing: none

Interface wl0, wl0.1: NG-Mixed
Wireless Packet Info
RX: 9230 OK, no error
TX: 15578 OK, 1 errors
MAC Filter: Permit only listed clients

Interface wl1, wl1.1: NA-Mixed
Wireless Packet Info
RX: 26688 OK, no error
TX: 37493 OK, 7 errors
MAC Filter: Permit only listed clients

Current Bridging Table
Bridge Name STP enabled Interface
br0 no vlan1 eth1 eth2
br1 no wl0.1 wl1.1

Overview of changes 30606 - 30631:
http://svn.dd-wrt.com/timeline?from=Sep+14%2C+2016&daysback=5&changeset=on&update=Update


Last edited by eywong on Fri Sep 16, 2016 3:02; edited 1 time in total
debianmain user
DD-WRT Novice


Joined: 07 Oct 2012
Posts: 37

PostPosted: Thu Sep 15, 2016 3:58    Post subject: Reply with quote
Hmmmm---looks like the 6300v2 is 28.9mb in size, so I'm going to pass unless someone brave enough tries it......
Scootcha
DD-WRT Novice


Joined: 23 May 2014
Posts: 40

PostPosted: Thu Sep 15, 2016 10:07    Post subject: Reply with quote
Router: Netgear WNDR3400v1
Firmware: dd-wrt.v24-30631-NEWD-2_K3.x_mega-nv64k.bin
Previous: DD-WRT v3.0-r30471 mega (08/24/16)
Previous Kernel: Linux 3.10.102 #13984 Wed Aug 24 16:59:30 CEST 2016 mips2016 armv7l
Status: Software bricked
Reset: Yes, numerous times
Errors: no

Just like 30605 this one will not load for me. Also tried to downrev with mini version first but still had no luck.

Reverted to dd-wrt.v24-30471-NEWD-2_K3.x_mega-nv64k.bin
Valeriy_tc
DD-WRT User


Joined: 03 Sep 2016
Posts: 67
Location: Ukraine

PostPosted: Thu Sep 15, 2016 10:25    Post subject: Reply with quote
Router: Linksys EA6400
Firmware: DD-WRT v3.0-r30631 std (09/14/16)
Kernel: Linux 4.4.21-rc1 #1393 SMP Wed Sep 14 07:07:04 CEST 2016 armv7l
Status: Working
Reset: Yes
Previous: DD-WRT v3.0-r30600M kongac (09/09/16)
Errors: No
CPU 68.0 °C / WL0 50.4 °C
All Ok! Working perfect!
Brimmy
DD-WRT User


Joined: 29 Mar 2015
Posts: 381

PostPosted: Thu Sep 15, 2016 11:39    Post subject: Reply with quote
Router: Buffalo WZR-1750DHP&DHPD
Firmware: DD-WRT v3.0-r30631 std (09/14/16)
Kernel: Linux 4.4.21-rc1 #1393 SMP Wed Sep 14 07:07:04 CEST 2016 armv7l
Status: Working
Reset: yes via GUI reset to defaults
Previous: 30534
Errors: yes, 4 Rx but none after router reboot.
Uptime: 7:56

Still, TX still transmits packets, like 2-3 packets every second, even when no device is connected, right now it is Received (RX)100% 5732 OK, no error Transmitted (TX)100% 22126 OK, no error and router locks up when any interface priority is added to QoS.
js1662
DD-WRT Guru


Joined: 23 Jul 2014
Posts: 1237
Location: BC, CA

PostPosted: Fri Sep 16, 2016 5:52    Post subject: Reply with quote
Router: Linksys EA6500 v1
Firmware: DD-WRT v3.0-r30631 giga (09/14/16)
Kernel: Linux 3.10.103 #14197 Wed Sep 14 12:55:12 CEST 2016 mips
Flashing method: Due to blinking Cisco light, I have to use tftp method to flash the router.
Status: Working.
Reset: I did hard reset because I forgot the previous IP setting and password.
Errors: No.
Operating Mode: client bridge using 5G with 2.4G disabled.
USB storage: Working for format ext2/ext3/ext4/ntfs/fat32.
sgniwder
DD-WRT Novice


Joined: 13 Nov 2008
Posts: 21

PostPosted: Fri Sep 16, 2016 14:55    Post subject: Reply with quote
Router: TrendNet TEW-811DRU
Firmware: DD-WRT v3.0-r30631 mini (09/14/16)
Kernel Version: Linux 4.4.21-rc1 #1396 Wed Sep 14 07:34:26 CEST 2016 armv7l
Status: Not Working
Reset: No
Previous: r29396
Errors: USB Drive will not mount. Status is noted as Not Mounted.

I went back to r29396. This is the last version that will allow usb drives for this model and I need this for YAMon3. This is reported in ticket 5467.

_________________
Asus RT-AC68R -r31205M kongac-Main Router
TEW811DRU -r31825 mini-AP
TEW811DRU -r31825 mini-Repeater Bridge
RNX-150RT-r29396-AP
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 7689
Location: Netherlands

PostPosted: Sat Sep 17, 2016 6:28    Post subject: Reply with quote
Router Model: Linksys WRT320N

Firmware Version: DD-WRT v3.0-r30631 mini (09/14/16)

Kernel Version: Linux 2.6.24.111 #31106 Wed Sep 14 00:26:51 CEST 2016 mips

Reset: Yes via WPS button before and after

Status: working as AP, good speed, good temp, uptime 14H

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
WireGuard Documents & Guides:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327397
OpenVPN Documents & Guides: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327398
IPSET: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327261
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Acumen
DD-WRT User


Joined: 15 Nov 2014
Posts: 221

PostPosted: Sat Sep 17, 2016 14:40    Post subject: Reply with quote
Bernadoe wrote:
Firmware: DD-WRT v3.0-r30631 std (09/14/16)
Kernel: Linux 4.4.21-rc1 #1393 SMP Wed Sep 14 07:07:04 CEST 2016 armv7l
Status: Working
Reset: No
Previous: 30605
Errors: No

CPU 55.8 °C / WL0 46.3 °C / WL1 50.7 °C


And your router is a .... Wink

_________________
Netgear WNDR4300v1 DD-WRT v3.0 BS r29837 | Netgear R6400 DD-WRT v3.0 KB r33525M | Tickets: 5429
IPv4 & IPv6-PD | ProFTP & Samba to USB thumb | DNSMasq DHCPv6 | Pi-Hole on RasPi

Found a bug, report it so the it can be fixed: http://svn.dd-wrt.com/
Didson
DD-WRT Novice


Joined: 14 Sep 2016
Posts: 2

PostPosted: Sat Sep 17, 2016 16:12    Post subject: Reply with quote
Router: Asus RT-AC66U
Firmware: DD-WRT v3.0-r30631 giga (09/14/16)
Kernel: Linux 3.10.103 #14197 Wed Sep 14 12:55:12 CEST 2016 mips
Status: Working
Reset: Yes
Previous: DD-WRT v3.0-r30536 giga (09/01/16)
Errors: Yes

First value of IP Address and Subnet mask when use Unbridged interface is with range 1-223 instead 0-255 and can't enter
255.255.255.0 subnet mask.
Also after upgrade IP address and subnet mask was
0.0.0.0.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum