Joined: 18 Aug 2009 Posts: 597 Location: Antigua/Seattle
Posted: Fri Aug 11, 2017 16:00 Post subject:
gufus wrote:
aairon wrote:
driver name: mwlwifi
chip type: 88W8964
hw version: 7
driver version: 10.3.4.0-20170810
firmware version: 0x09030007
power table loaded from dts: no
firmware region code: 0x10
mac address: 60:38:e0:13:64:f9
2g: enable
5g: disable
antenna: 4 4
irq number: 46
ap macid support: 0000ffff
sta macid support: 00010000
macid used: 00000001
radio: enable
iobase0: e1200000
iobase1: e1480000
tx limit: 1024
rx limit: 16384
I have been running this for 13 hours without anything strange from the serial output
what version of DD-WRT contains that driver or did you make that yourself?
The ver of dd-wrt is NOT available to the public. Yet...
Bummer that version was failing on me yesterday so I dumped it. The 5 Ghz wifi was dropping and the UI never did completely lock out but the response was super sluggish to connect to the web ui. Dropping the 5 Ghz was the deal breaker for me, this LEDE build is still solid and none of the endless warnings gushing forth all day long.
Well I have no choice for 5 ghz I must use this LEDE for now I'll check back in next week to see what happened.
Strange, I've been running r33006 for the last week. Only had one hickup where I had to manually reboot due to UI lockout in the first few days. The wireless seems to stay connected, although I have other router APs which overlap coverage.
Joined: 18 Aug 2009 Posts: 597 Location: Antigua/Seattle
Posted: Fri Aug 11, 2017 17:53 Post subject:
Dunkelstar wrote:
Strange, I've been running r33006 for the last week. Only had one hickup where I had to manually reboot due to UI lockout in the first few days. The wireless seems to stay connected, although I have other router APs which overlap coverage.
Who knows, YMMV strongly it seems.
You need to read this thread then you will clearly understand why you THINK it's working fine lol.
Joined: 13 Jun 2006 Posts: 1608 Location: SE Michigan USA
Posted: Fri Aug 11, 2017 18:35 Post subject:
[quote="aairon"
Well I have no choice for 5 ghz I must use this LEDE for now I'll check back in next week to see what happened.[/quote]
Unfortunately, I have to agree with you about LEDE. Running much better then the latest DD-WRT builds I have tried. Since I only see a webflash for the 33092 build I am not going to bother as I always keep the Linksys firmware available. _________________ Unifi Security Gateway:Unifi Firmware Netgear r7800:Voxel Firmware Modem:Netgear CM500V voice and Data. ISP:Comcast tutorial for flashing "WRT" series: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=287813 DD-WRT Installation, Upgrade & Basic Setup–Cliff Notes: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117 Kong DD-WRT Config Tutorial: http://www.instructables.com/id/Install-and-Configure-a-DD-WRT-Kong-Router/ I tried to be normal once. Worst 2 minutes ever.
Joined: 04 Aug 2012 Posts: 612 Location: behind the screen
Posted: Fri Aug 11, 2017 19:14 Post subject:
Dunkelstar wrote:
Strange, I've been running r33006 for the last week. Only had one hickup where I had to manually reboot due to UI lockout in the first few days. The wireless seems to stay connected, although I have other router APs which overlap coverage.
Strange, I've been running r33006 for the last week. Only had one hickup where I had to manually reboot due to UI lockout in the first few days. The wireless seems to stay connected, although I have other router APs which overlap coverage.
If that's r33129 I just tried it with the same results as yesterday with r33092. The 5ghz speeds are a fraction of what they should be for the channels that do work and channel 36 isn’t working at all. I use AC/N Mixed @ 80 mhz.
Joined: 04 Aug 2012 Posts: 612 Location: behind the screen
Posted: Fri Aug 11, 2017 19:36 Post subject:
05dyna wrote:
gufus wrote:
Dunkelstar wrote:
Strange, I've been running r33006 for the last week. Only had one hickup where I had to manually reboot due to UI lockout in the first few days. The wireless seems to stay connected, although I have other router APs which overlap coverage.
If that's r33129 I just tried it with the same results as yesterday with r33092. The 5ghz speeds are a fraction of what they should be for the channels that do work and channel 36 isn’t working at all. I use AC/N Mixed @ 80 mhz.
Ah
check the driver ver
root@DD-WRT 5d:e1:f6:~# cat /sys/kernel/debug/ieee80211/phy1/mwlwifi/info _________________ WRT3200ACM openwrt 18.06.5
WRT3200ACM dd-wrt r41791
WRT54GL dd-wrt r21676
Joined: 04 Aug 2012 Posts: 612 Location: behind the screen
Posted: Fri Aug 11, 2017 19:44 Post subject:
05dyna wrote:
gufus wrote:
Dunkelstar wrote:
Strange, I've been running r33006 for the last week. Only had one hickup where I had to manually reboot due to UI lockout in the first few days. The wireless seems to stay connected, although I have other router APs which overlap coverage.
If that's r33129 I just tried it with the same results as yesterday with r33092. The 5ghz speeds are a fraction of what they should be for the channels that do work and channel 36 isn’t working at all. I use AC/N Mixed @ 80 mhz.
my 1900ac
Using username "root".
Unauthorized access is prohibited!
Authenticating with public key "rsa-key-20120810"
Joined: 13 Jun 2006 Posts: 1608 Location: SE Michigan USA
Posted: Fri Aug 11, 2017 19:53 Post subject:
gufus wrote:
Dunkelstar wrote:
Strange, I've been running r33006 for the last week. Only had one hickup where I had to manually reboot due to UI lockout in the first few days. The wireless seems to stay connected, although I have other router APs which overlap coverage.
Joined: 04 Aug 2012 Posts: 612 Location: behind the screen
Posted: Fri Aug 11, 2017 20:03 Post subject:
myersw wrote:
gufus wrote:
Dunkelstar wrote:
Strange, I've been running r33006 for the last week. Only had one hickup where I had to manually reboot due to UI lockout in the first few days. The wireless seems to stay connected, although I have other router APs which overlap coverage.
You need to read this thread then you will clearly understand why you THINK it's working fine lol.
Oh, I'm under no assumption that r33006 is working "fine" on the wrt3200. I run a small amount of services compared to others. I suspect this probably has a lot to do with mine not having the same problem(s) that others are describing. Case/user specific errors are common in the software/firmware/driver realm.
Time, patience, and thanks to those working on the project.
Strange, I've been running r33006 for the last week. Only had one hickup where I had to manually reboot due to UI lockout in the first few days. The wireless seems to stay connected, although I have other router APs which overlap coverage.
Who knows, YMMV strongly it seems.
You need to read this thread then you will clearly understand why you THINK it's working fine lol.
ok, i give up. i've been following this thread for weeks now maybe months and i'm dumbfounded with what's wrong with 33006. i'm running or appear to be. no reboots.
so what gives? _________________ asus rt-ac86u stock: 3.0.0.4.384_45149
wrt3200acm: r34578 {sunset}
"why nibble when u can take a byte."
Joined: 13 Jun 2006 Posts: 1608 Location: SE Michigan USA
Posted: Sat Aug 12, 2017 2:26 Post subject:
128bit wrote:
ok, i give up. i've been following this thread for weeks now maybe months and i'm dumbfounded with what's wrong with 33006. i'm running or appear to be. no reboots.
so what gives?
I ran 33006 for 3 days with no issues, no reboots, no lockups, just worked. Evenings at my house have multiple folks streaming at the same time. Was running it to test as I like to keep up with both LEDE and DD-WRT. Currrently I like LEDE better. Have had other times when I liked DD-WRT better. _________________ Unifi Security Gateway:Unifi Firmware Netgear r7800:Voxel Firmware Modem:Netgear CM500V voice and Data. ISP:Comcast tutorial for flashing "WRT" series: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=287813 DD-WRT Installation, Upgrade & Basic Setup–Cliff Notes: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117 Kong DD-WRT Config Tutorial: http://www.instructables.com/id/Install-and-Configure-a-DD-WRT-Kong-Router/ I tried to be normal once. Worst 2 minutes ever.
