braza DD-WRT User
Joined: 09 Oct 2006 Posts: 112
|
Posted: Wed Aug 24, 2016 18:53 Post subject: Hello! Need suport for new board wr749n v6 . |
|
Hi.
I have removed the SPI and manual flashed the dd-wrt to my new router wr749n v6 .
I have inserted wr841n v10.
The only POWER LED not worked .
DMESG log.
<5>[ 0.000000] Linux version 3.18.38 (root@nmndev) (gcc version 6.1.0 (LEDE GCC 6.1.0 r1259) ) #1475 Tue Aug 16 05:30:46 CEST 2016
<6>[ 0.000000] bootconsole [early0] enabled
<6>[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
<4>[ 0.000000] cpu apb ddr apb cpu 650 ddr 390 ahb 216
<6>[ 0.000000] sys id = 160 Qualcomm Atheros QCA9533 ver 2 rev 1.0 (0x0160)
<6>[ 0.000000] Determined physical RAM map:
<6>[ 0.000000] memory: 02000000 @ 00000000 (usable)
<4>[ 0.000000] Zone ranges:
<4>[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
<4>[ 0.000000] Movable zone start for each node
<4>[ 0.000000] Early memory node ranges
<4>[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
<6>[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
<7>[ 0.000000] On node 0 totalpages: 8192
<7>[ 0.000000] free_area_init_node: node 0, pgdat 802dc2f0, node_mem_map 81000000
<7>[ 0.000000] Normal zone: 64 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
<4>[ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
<4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Writing ErrCtl register=00000000
<6>[ 0.000000] Readback ErrCtl register=00000000
<4>[ 0.000000] Memory: 28996K/32768K available (2278K kernel code, 151K rwdata, 200K rodata, 176K init, 240K bss, 3772K reserved)
<6>[ 0.000000] NR_IRQS:83
<6>[ 0.060000] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
<6>[ 0.060000] pid_max: default: 32768 minimum: 301
<6>[ 0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.070000] NET: Registered protocol family 16
<6>[ 0.500000] Switched to clocksource MIPS
<6>[ 0.500000] NET: Registered protocol family 2
<6>[ 0.510000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.510000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.520000] TCP: Hash tables configured (established 1024 bind 1024)
<6>[ 0.520000] TCP: reno registered
<6>[ 0.530000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.530000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.540000] NET: Registered protocol family 1
<7>[ 0.540000] PCI: CLS 0 bytes, default 32
<5>[ 0.540000] gpio_proc: module loaded and /proc/gpio/ created
<5>[ 0.550000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<6>[ 0.560000] futex hash table entries: 256 (order: -1, 3072 bytes)
<6>[ 0.570000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>[ 0.570000] msgmni has been set to 56
<6>[ 0.580000] io scheduler noop registered (default)
<6>[ 0.580000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[ 0.590000] console [ttyS0] disabled
<6>[ 0.610000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
<6>[ 0.620000] console [ttyS0] enabled
<6>[ 0.630000] bootconsole [early0] disabled
<0>[ 0.630000] guessed flashsize = 4M
<0>[ 0.640000] scanning for root partition
<0>[ 0.640000] tplink uboot detected
<0>[ 0.650000] guessed bootloader size = 20000
<0>[ 0.660000]
<0>[ 0.660000] found squashfs at 110000
<6>[ 0.670000] adjusted length 3E0000, original length 3DB8C6
<5>[ 0.670000] Creating 9 MTD partitions on "ar7240-nor0":
<5>[ 0.680000] 0x000000000000-0x000000020000 : "RedBoot"
<5>[ 0.680000] 0x000000020000-0x0000003e0000 : "linux"
<5>[ 0.690000] 0x000000110000-0x0000003e0000 : "rootfs"
<5>[ 0.690000] mtd: partition "rootfs" set to be root filesystem
<5>[ 0.700000] 0x0000003e0000-0x000000400000 : "ddwrt"
<5>[ 0.710000] 0x0000003e0000-0x0000003f0000 : "nvram"
<5>[ 0.710000] 0x0000003f0000-0x000000400000 : "board_config"
<5>[ 0.720000] 0x000000000000-0x000000400000 : "fullflash"
<5>[ 0.720000] 0x000000000000-0x000000020000 : "fullboot"
<5>[ 0.730000] 0x000000010000-0x000000020000 : "uboot-env"
<6>[ 0.740000] libphy: Fixed MDIO Bus: probed
<6>[ 0.740000] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.750000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 0.750000] PPP generic driver version 2.4.2
<6>[ 0.760000] PPP BSD Compression module registered
<6>[ 0.760000] PPP Deflate Compression module registered
<6>[ 0.770000] PPP MPPE Compression module registered
<6>[ 0.770000] NET: Registered protocol family 24
<6>[ 0.780000] u32 classifier
<6>[ 0.790000] Performance counters on
<6>[ 0.790000] input device check on
<6>[ 0.790000] Actions configured
<6>[ 0.800000] Netfilter messages via NETLINK v0.30.
<6>[ 0.800000] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
<4>[ 0.810000] nf_conntrack_rtsp v0.7 loading
<4>[ 0.810000] nf_nat_rtsp v0.7 loading
<6>[ 0.820000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.820000] TCP: westwood registered
<6>[ 0.830000] TCP: hybla registered
<6>[ 0.830000] TCP: vegas registered
<6>[ 0.830000] NET: Registered protocol family 17
<6>[ 0.840000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
<5>[ 0.850000] Bridge firewalling registered
<6>[ 0.860000] 8021q: 802.1Q VLAN Support v1.8
<6>[ 0.860000] searching for nvram
<6>[ 0.860000] nvram size = 0
<6>[ 0.900000] Atheros AR71xx hardware watchdog driver version 0.1.0
<6>[ 0.900000] ar71xx-wdt: timeout=15 secs (max=171) ref freq=25000000
<6>[ 0.930000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[ 0.940000] Freeing unused kernel memory: 176K (802f4000 - 80320000)
<7>[ 3.080000] ar71xx-wdt: enabling watchdog timer
<6>[ 3.180000] libphy: ag71xx_mdio: probed
<6>[ 3.770000] ag71xx-mdio.1: Found an AR934X built-in switch
<6>[ 3.830000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
<6>[ 4.500000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
<6>[ 4.510000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
<6>[ 4.790000] Loading modules backported from Linux version wt-2016-06-20-0-gbc17424
<6>[ 4.800000] Backport generated by backports.git backports-20160216-7-g5735958
<7>[ 5.560000] ath: EEPROM regdomain: 0x0
<7>[ 5.560000] ath: EEPROM indicates default country code should be used
<7>[ 5.560000] ath: doing EEPROM country->regdmn map search
<7>[ 5.560000] ath: country maps to regdmn code: 0x3a
<7>[ 5.560000] ath: Country alpha2 being used: US
<7>[ 5.560000] ath: Regpair used: 0x3a
<7>[ 5.570000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<6>[ 5.580000] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=79
<6>[ 6.180000] eth0: link up (1000Mbps/Full duplex)
<6>[ 7.490000] device br0 entered promiscuous mode
<6>[ 7.520000] eth0: link down
<6>[ 7.690000] device eth0 entered promiscuous mode
<6>[ 7.700000] br0: port 1(eth0) entered forwarding state
<6>[ 7.710000] br0: port 1(eth0) entered forwarding state
<6>[ 7.710000] device br0 left promiscuous mode
<6>[ 7.720000] device br0 entered promiscuous mode
<6>[ 7.740000] device br0 left promiscuous mode
<6>[ 8.490000] br0: port 1(eth0) entered disabled state
<6>[ 9.290000] eth0: link up (1000Mbps/Full duplex)
<6>[ 9.290000] br0: port 1(eth0) entered forwarding state
<6>[ 9.300000] br0: port 1(eth0) entered forwarding state
<6>[ 11.300000] br0: port 1(eth0) entered forwarding state
<6>[ 12.980000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
<6>[ 15.190000] device ath0 entered promiscuous mode
<6>[ 15.190000] br0: port 2(ath0) entered forwarding state
<6>[ 15.200000] br0: port 2(ath0) entered forwarding state
<5>[ 15.830000] random: dropbearkey urandom read with 31 bits of entropy available
<6>[ 15.850000] device eth1 entered promiscuous mode
<6>[ 17.040000] device eth1 left promiscuous mode
<6>[ 17.200000] br0: port 2(ath0) entered forwarding state
<5>[ 41.710000] random: nonblocking pool is initialized
<6>[ 145.600000] device eth0 left promiscuous mode
<6>[ 145.610000] br0: port 1(eth0) entered disabled state
<6>[ 145.620000] device ath0 left promiscuous mode
<6>[ 145.630000] br0: port 2(ath0) entered disabled state
<6>[ 145.880000] device br0 entered promiscuous mode
<6>[ 145.920000] eth0: link down
<6>[ 146.090000] device eth0 entered promiscuous mode
<6>[ 146.100000] br0: port 1(eth0) entered forwarding state
<6>[ 146.100000] br0: port 1(eth0) entered forwarding state
<6>[ 146.120000] device br0 left promiscuous mode
<6>[ 146.130000] device br0 entered promiscuous mode
<6>[ 146.150000] device br0 left promiscuous mode
<6>[ 146.630000] br0: port 1(eth0) entered disabled state
<6>[ 147.710000] eth0: link up (1000Mbps/Full duplex)
<6>[ 147.710000] br0: port 1(eth0) entered forwarding state
<6>[ 147.720000] br0: port 1(eth0) entered forwarding state
<6>[ 149.720000] br0: port 1(eth0) entered forwarding state
<6>[ 153.850000] device ath0 entered promiscuous mode
<6>[ 153.860000] br0: port 2(ath0) entered forwarding state
<6>[ 153.860000] br0: port 2(ath0) entered forwarding state
<6>[ 155.860000] br0: port 2(ath0) entered forwarding state _________________
|
|
legolas DD-WRT Novice
Joined: 22 Feb 2017 Posts: 26
|
Posted: Wed Jun 23, 2021 16:29 Post subject: |
|
Hello, found any solution on this? _________________ In use, community ISP:
1 tplink WR842ND; 2 WR741N; 3 WR740N : with DD-WRT
1 mymax WR934-BK "original" firmware
1 d-link dsl-2740e with Totolink ND300
2 Sagem F@ST2704 with OpenWrt
1 wavlink ND300
1 wrt54g
waiting:
1 wrt54g
airgrid m5 bullet |
|