Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29440_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ Unofficial Kong's release repository : http://ddwrt-kong.clonevince.fr/
Posted: Mon Aug 08, 2016 8:00 Post subject: Re: New Kong's build: DD-WRT 30360M - 2016/08/07
Router: R7000
Firmware: 30360M
Kernel:
Status: Working
Reset: No
Errors: Speedtest shows download of ~100Mb out of 300Mb available. In contrast using 30356(BS) shows download of ~290Mb. I've switched back and forth between them a couple of times to ensure it's consistent. Had the same issue with 30350M.
Posted: Mon Aug 08, 2016 8:40 Post subject: Re: New Kong's build: DD-WRT 30360M - 2016/08/07
Adam64 wrote:
Router: R7000
Firmware: 30360M
Kernel:
Status: Working
Reset: No
Errors: Speedtest shows download of ~100Mb out of 300Mb available. In contrast using 30356(BS) shows download of ~290Mb. I've switched back and forth between them a couple of times to ensure it's consistent. Had the same issue with 30350M.
Router:Dlink-DIR860L-A1
Firmware: DD-WRT v3.0-r30360M kongac (08/07/16)
Kernel:Linux Linux 4.4.16 #216 SMP Sun Aug 7 12:08:14 CEST 2016 armv7l
Status:OK
Reset: no
Errors: none
Sir Kong where can I find this settings? Regulatory Domain i cannot find it or its not available for my router?
Thanks Sir Kong _________________ Dlink-DIR860L-A1
DD-WRT v3.0-r30560M kongac (09/05/16)
Joined: 09 Nov 2014 Posts: 314 Location: Bakersfield, CA
Posted: Mon Aug 08, 2016 14:32 Post subject:
Router: r7000
Firmware: DD-WRT v3.0-r30360M kongac (08/07/16)
Kernel: Linux 4.4.16 #216 SMP Sun Aug 7 12:08:14 CEST 2016 armv7l
Status: Working great, 22 hour uptime.
Reset: Nope, flashed via ddup --flash-latest
Errors: 2 TX errors, but nothing other than that. Speedtests are better than the build I was using previously. Pretty much stays stable the entire test. Testing for uptime stability now. _________________ Deployed Routers:
Netgear R7800 - 1x build 46979
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 3x build 46979
Posted: Mon Aug 08, 2016 15:15 Post subject: Re: New Kong's build: DD-WRT 30360M - 2016/08/07
<Kong> wrote:
Adam64 wrote:
Router: R7000
Firmware: 30360M
Kernel:
Status: Working
Reset: No
Errors: Speedtest shows download of ~100Mb out of 300Mb available. In contrast using 30356(BS) shows download of ~290Mb. I've switched back and forth between them a couple of times to ensure it's consistent. Had the same issue with 30350M.
OK; will check that, maybe I still have some debug compile flag left.
I'm glad you are looking and hope you find it. Now that wireless signal is in line with Netgear FW, this is the only thing stopping me from coming back to DD-WRT. I've never been able to achieve my ISP's 230 Mbps down rate on my R8500 and that's a powerful enough machine that I wouldn't think it would be struggling. As I reported previously, I get anywhere between 80 and 120 Mbps on my ISP's own speed test while getting 230 Mbps every time with the Netgear FW (I'm talking wired connection: the wireless was even slower). The odd thing is that once in a while (maybe one in 15 or 20 tests), I actually was able to get the full 230 for the whole test. It's like it randomly "woke up" once in a while... but it only had fleeting moments of speed. Maybe that clue will help in your search for an answer.
I always got the impression that DD-WRT was faster on the wired connection when not much was going on with the wireless radios, like it could only allocate CPU to wired or wireless but not both at the same time. But that was just my gut feeling.
Posted: Mon Aug 08, 2016 15:29 Post subject: Re: New Kong's build: DD-WRT 30360M - 2016/08/07
Adam64 wrote:
Router: R7000
Firmware: 30360M
Kernel:
Status: Working
Reset: No
Errors: Speedtest shows download of ~100Mb out of 300Mb available. In contrast using 30356(BS) shows download of ~290Mb. I've switched back and forth between them a couple of times to ensure it's consistent. Had the same issue with 30350M.
Router: R8000
Firmware: r30360M kongac (08/07/16)
Kernel: 4.4.16
Status: Working
Reset: No
Errors: After flashing, I had to change the Regulatory Domain to something other than United States, click apply, then change it back to United States and apply to restore Wireless Access. _________________ pfSense i7-4510U + 2x Intel 82574 + 2x Intel i350 Mini-ITX Build
940/880 mbit Fiber Internet from FiOS
Dell PowerConnect 2716 Gigabit Switch
Netgear R8000 AP, running DD-WRT
Asus RT-66U AP, running DD-WRT
Posted: Mon Aug 08, 2016 17:17 Post subject: Re: New Kong's build: DD-WRT 30360M - 2016/08/07
Adam64 wrote:
Router: R7000
Firmware: 30360M
Kernel:
Status: Working
Reset: No
Errors: Speedtest shows download of ~100Mb out of 300Mb available. In contrast using 30356(BS) shows download of ~290Mb. I've switched back and forth between them a couple of times to ensure it's consistent. Had the same issue with 30350M.
I can confirm same issue here with my R7000. 200/20 connection, but getting 125-150. Switched to BS build and 200/20.
BTW, been using kong since I put in R7000. Great stuff and much appreciated!
Router: R8000
Firmware: r30360M kongac (08/07/16)
Kernel: 4.4.16
Status: Working
Reset: No
Errors: After flashing, I had to change the Regulatory Domain to something other than United States, click apply, then change it back to United States and apply to restore Wireless Access.
Kong, I am having an issue with the R8000 wireless on the latest revision. Every time the router reboots, I need to change the regulatory domain in order for the router to accept clients. Its been like this the last two revision.
Any idea what the issue could be? Thanks! _________________ pfSense i7-4510U + 2x Intel 82574 + 2x Intel i350 Mini-ITX Build
940/880 mbit Fiber Internet from FiOS
Dell PowerConnect 2716 Gigabit Switch
Netgear R8000 AP, running DD-WRT
Asus RT-66U AP, running DD-WRT
