Windows 10 doesn´t see NAS

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Author Message
Painstouch
DD-WRT Novice


Joined: 12 Jul 2015
Posts: 15
Location: Slovenia

PostPosted: Tue Jun 14, 2016 15:14    Post subject: Windows 10 doesn´t see NAS Reply with quote
Greetings.

I have a problem seeing my NAS (WD) in Windows 10. It used to work, did upgrade some time ago the Router (WRT-160NL) and now I cant see it in the Network anymore, nor can I search for it.

It does show in the Router under USB without a problem, status here;
--- /dev/sda1
Block device, size 931.5 GiB (1000167440384 bytes)
Windows BOOTMGR boot loader
NTFS file system
UUID E026928526925BFA
Volume size 931.5 GiB (1000167439872 bytes, 1953452031 sectors)
/dev/sda1 mounted to /tmp/mnt/sda1

My Samba settings are set as Workgroup: Workgroup (same as Windows), I selected the correct drive and set Public Share.

Windows 10 doesn't see anything.

Help?
Sponsor
Detection
DD-WRT User


Joined: 19 Jan 2012
Posts: 403
Location: UK

PostPosted: Tue Jun 14, 2016 21:17    Post subject: Reply with quote
Can you see it if you type the router name into Explorer?

For example, mine is just called DD-WRT

If I type:

\\DD-WRT

Hit enter

It brings up my Samba share

_________________
TPLINK TL-WR2543ND (5GHz)
WRT160NL (2.4GHz)
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5227
Location: Texas

PostPosted: Tue Jun 14, 2016 23:07    Post subject: Reply with quote
What build??????????????

There was some NAS problems with some.
tou.manokat@gmail.com
DD-WRT User


Joined: 07 May 2016
Posts: 111

PostPosted: Wed Jun 15, 2016 3:17    Post subject: Re: Windows 10 doesn´t see NAS Reply with quote
Painstouch wrote:
Greetings.

I have a problem seeing my NAS (WD) in Windows 10. It used to work, did upgrade some time ago the Router (WRT-160NL) and now I cant see it in the Network anymore, nor can I search for it.

It does show in the Router under USB without a problem, status here;
--- /dev/sda1
Block device, size 931.5 GiB (1000167440384 bytes)
Windows BOOTMGR boot loader
NTFS file system
UUID E026928526925BFA
Volume size 931.5 GiB (1000167439872 bytes, 1953452031 sectors)
/dev/sda1 mounted to /tmp/mnt/sda1

My Samba settings are set as Workgroup: Workgroup (same as Windows), I selected the correct drive and set Public Share.

Windows 10 doesn't see anything.

Help?


Turn on your network discovery on Windows 10. When you do that, Windows will detect NETBIOS name of Samba server on WRT-160NL, which by default is called DD-WRT. You can of course change it via DD-WRT setup page on "Router Name" or by adding this string on Samba general section of configuration file, "netbios name = WRT-160NL"

On your Windows 10, if you press "Windows Key" and R and type in the UNC location \\DD-WRT or \\192.168.1.1, as per Detection, you should be able to see your Samba/NAS share.

If you don't see DD-WRT (The default NETBIOS) or any other computer (NETBIOS) names on the network under your windows "Network" icon, it means "private network discovery" is off. If you can't open the UNC \\DD-WRT\share-name, it means your Samba/NAS on WRT-160NL is not configured properly.

_________________
Linksys 54G v2
Linksys 54G v6
Linksys 54GS v6
Linksys 120N
Linksys Valet-M10 Tomato v132
Linksys Valet-M20 Tomato V132
Netgear WNR3400 Advanced Tomato
Netgear WNR3400 Advanced Tomato
TRENDNet TEW-632BRP DD-WRT r22118
TRENDNet TEW-632BRP DD-WRT r22118
Buffalo G300NH DD-WRT r22118
TPLINK WNDR1043ND DD-WRT r22118
TPLINK WNDR1042ND Stock
TPLINK WNDR841ND r22118
DLINK DIR-835 A1 r22118
DLINK DIR-835 A1 r22118
DLINK DIR-835 A1 r22118
DLINK DIR-501 Stock firmware
DLINK WBR-2310 Stock firmware
Linksys E3000 Shibby Tomato
Linksys E2500 Advanced Tomato
Netis WF-2404 Stock
Netis WF-2404 Stcck
Belkin N600 Extender (Bricked on its own)
Knabberriegel
DD-WRT Novice


Joined: 02 Nov 2016
Posts: 1

PostPosted: Wed Nov 02, 2016 14:25    Post subject: Reply with quote
Hi all,

got the Same Problem with the build-in samba server.

Unter WinXP / Win7 the Samba Server is accessible under the UNC Path \\192.168.2.200\Share.

Under Win10 (1607) there comes an error.

Router: TPLINK TL-WDR4300 v1
Build: DD-WRT v3.0-r30709 std (09/29/16)

Thanks for Help!
roreru
DD-WRT Novice


Joined: 30 May 2008
Posts: 5

PostPosted: Tue Nov 08, 2016 1:02    Post subject: Reply with quote
I have similar problem with WIndows 10. I can't access DD-WRT NAS. It says
\\DD-WRT is not accessible. You may not a=have premission to use this network resource. Contact the server administrator to find out if your= have the permission"

I had no problem in Windows 7 to access the drive. I added user nae ans password in DD-WRT but it does not work.
yeahman
DD-WRT Novice


Joined: 16 Jan 2017
Posts: 4

PostPosted: Sun Jan 22, 2017 4:08    Post subject: Reply with quote
I can access it from Android. Can't through Windows 10. Anyone figure it out?
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5227
Location: Texas

PostPosted: Sun Jan 22, 2017 4:36    Post subject: Reply with quote
yeahman wrote:
I can access it from Android. Can't through Windows 10. Anyone figure it out?


Control Panel\Network and Internet\Network and Sharing Center
Make sure you are on 'Private Network'

Type into open windows window
\\routername\sharesname
yeahman
DD-WRT Novice


Joined: 16 Jan 2017
Posts: 4

PostPosted: Sun Jan 22, 2017 5:13    Post subject: Reply with quote
mrjcd wrote:
yeahman wrote:
I can access it from Android. Can't through Windows 10. Anyone figure it out?


Control Panel\Network and Internet\Network and Sharing Center
Make sure you are on 'Private Network'

Type into open windows window
\\routername\sharesname

Tried that. I can access other Windows 10 shares on the network.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 3642
Location: UK, London, just across the river..

PostPosted: Sun Jan 22, 2017 8:59    Post subject: Reply with quote
in that case there must be some settings in W 10 firewall that are blocking NAS, so either unblock it or create a new rule that permits it, make sure you use home networks not private or just the firmware is buggy, for certain tings some builds are better than the others...
_________________
Atheros
TP-Link WR740Nv1 ------DD-WRT 43334 BS AP,NAT
TP-Link WR740Nv4 ------DD-WRT 43028 BS WAP/Switch
TP-Link WR1043NDv2 ----DD-WRT 43516 BS AP,NAT,AD Block,AP Isolation,Firewall,Local DNS,Forced DNS,DoT,VPN
TP-Link WR1043NDv2 ----DD-WRT 43334 BS AP,NAT,AD Block,Firewall,Local DNS,Forced DNS,DoT,VPN
TP-Link WR1043NDv2 ----Gargoyle OS 1.12.0 AP,NAT,QoS,Quotas
Qualcomm/IPQ8065
Netgear R7800 -------DD-WRT 43334 BS AP,NAT,AD-Block,AP&Net Isolation,VLAN's,Firewall,Local DNS,DoT
Broadcom
Netgear R7000 -------DD-WRT 43334 BS AP,Wi-Fi OFF,NAT,AD-Block,Firewall,Local DNS,Forced DNS,DoT,VPN
------------------------------------------------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 via Entware by mac913
yeahman
DD-WRT Novice


Joined: 16 Jan 2017
Posts: 4

PostPosted: Mon Jan 23, 2017 16:42    Post subject: Reply with quote
Found the problem. Needed to install SMB 1.0 support in Windows 10.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5227
Location: Texas

PostPosted: Mon Jan 23, 2017 16:44    Post subject: Reply with quote
yeahman wrote:
Found the problem. Needed to install SMB 1.0 support in Windows 10.

Thanks for the info
Detection
DD-WRT User


Joined: 19 Jan 2012
Posts: 403
Location: UK

PostPosted: Wed Jan 25, 2017 22:45    Post subject: Reply with quote
yeahman wrote:
Found the problem. Needed to install SMB 1.0 support in Windows 10.


Just checked SMB1.0 support on my Windows 10 install using this command in powershell

Get-SmbServerConfiguration | Select EnableSMB1Protocol, EnableSMB2Protocol

And it came back as TRUE for both - already enabled without doing it manually

_________________
TPLINK TL-WR2543ND (5GHz)
WRT160NL (2.4GHz)
shamamus
DD-WRT Novice


Joined: 28 Jun 2018
Posts: 1

PostPosted: Thu Jun 28, 2018 8:09    Post subject: Reply with quote
yeahman wrote:
Found the problem. Needed to install SMB 1.0 support in Windows 10.


You're my hero! I was about to lose my cool about this. Very Happy
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum