INTERNET DROPS resolving host issue

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Author Message
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1304

PostPosted: Thu May 09, 2019 14:48    Post subject: INTERNET DROPS resolving host issue Reply with quote
So I've been having this issue for a while now with ddwrt: internet randomly drop (mostly apple devices) can't resolve host, wifi is fine- stay connected. Had to toggle wifi off/on for internet to work again

Already tried various dnsmasq options no resolv domain-required etc. or even off (uncheck dnsmasq for dns) still no luck. My setup is basic no wds no vap no mess no samba...

No such issue with kong openwrt build, which is the only working solution

r7500v2
Sponsor
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6410
Location: UK, London, just across the river..

PostPosted: Thu May 09, 2019 15:37    Post subject: Reply with quote
on R7800, 1043v2, R7000 still nothing like...all seems
good, the only issues is ipleak.net not working as intended, and few other sites give an resolving errors.. i don't know if it was due to the new firmware... im quite busy to try with some old firmware/builds will see...
I can tell you that with dnscypt was better, but this doesn't count....i guess

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Thu May 09, 2019 16:36    Post subject: Reply with quote
something with qca9980 again, mrjcd had some issue much like this with the latest bs build
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1304

PostPosted: Thu May 09, 2019 16:42    Post subject: Reply with quote
tatsuya46 wrote:
something with qca9980 again, mrjcd had some issue much like this with the latest bs build


yep my hunch is the current fw 10.4 in ddwrt builds. have been pushing the official 10.4.1 which is in kong openwrt build hence no issue there, yet ddwrt being stubborn as usual
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Thu May 09, 2019 16:53    Post subject: Reply with quote
if u force all to 2.4ghz qca9880 im guessing the issue doesnt happen there?
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1304

PostPosted: Thu May 09, 2019 17:12    Post subject: Reply with quote
tatsuya46 wrote:
if u force all to 2.4ghz qca9880 im guessing the issue doesnt happen there?


nope
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Thu May 09, 2019 17:31    Post subject: Reply with quote
Never lost resolving DNS but all 5GHz clients would get to way less than 1 mbps.
When this started happening max I ever got was 2 mbps...it was unuseable for me....but funny, upload was not affected...Imma thinking BS fixed it now.
r39751 just give me terrible 5GHz trouble with hundereds of below messages.
ath10k_pci 0001:01:00.0: failed to lookup txq for peer_id 46 tid 2
ath10k_pci 0001:01:00.0: failed to lookup txq for peer_id 46 tid 2
ath10k_warn: 34 callbacks suppressed
ath10k_pci 0001:01:00.0: failed to lookup txq for peer_id 47 tid 0
ath10k_pci 0001:01:00.0: failed to lookup txq for peer_id 47 tid 0
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1304

PostPosted: Sun May 12, 2019 15:35    Post subject: Reply with quote
jerrytouille wrote:
tatsuya46 wrote:
something with qca9980 again, mrjcd had some issue much like this with the latest bs build

yep my hunch is the current fw 10.4 in ddwrt builds. have been pushing the official 10.4.1 which is in kong openwrt build hence no issue there, yet ddwrt being stubborn as usual


was able to confirm the issue: use ddwrt 10.4 fw in openwrt build resulted in exact same problem!!
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1304

PostPosted: Sun May 19, 2019 19:46    Post subject: Reply with quote
issue is fixed in latest beta 39825.

https://svn.dd-wrt.com/ticket/6186#comment:44
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum