Wireless link using WAP54G

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
droopycr
DD-WRT Novice


Joined: 14 Apr 2016
Posts: 3

PostPosted: Thu Apr 14, 2016 15:39    Post subject: Wireless link using WAP54G Reply with quote
I want to make a wireless link with two WAP54G, I've put one AP and the other as Client, Client Bridge, Repeater and Repeater Bidge, but does not link well, there is some way if possible?


Thanks
Sponsor
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2496
Location: Indy

PostPosted: Thu Apr 14, 2016 18:07    Post subject: Re: Wireless link using WAP54G Reply with quote
droopycr wrote:
I want to make a wireless link with two WAP54G
There's also WDS. What build (number and type) are you using? And what settings did you use in your client/repeater testing? There are long and short methods to each, I recall, if you used the Linking Routers wiki.
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 20.1.2|FT2020.2: EA6900v1.1@1GHz, F7D8302@532|DD r42681: DIR-810L, WNDR4500v2 & 4000@533,
R6300v1, RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT 19.7.2: RT-ACRH13, R6220, WNDR3700v4
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5109
Location: Texas

PostPosted: Thu Apr 14, 2016 20:29    Post subject: Reply with quote
Old 14929 works well on the WAP54Gv3.x
I use 26866 for WDS w/mine.
Radio schedule on/off in advanced wireless has some issues with this build on the old WAPs but works well on WRT54GS.

Also 27858 is good but the wireless survey don't work with it on WAP54G in WDS mode.

26866 prolly best for a straight WDS link with no other wireless devices connected.... you can even use CH 14 just for their link and that will put them out of way of other wireless..... Works well for me.
Setup properly you can maintain 25-31 Mbps using 26866....I stream Netflix and/or Hulu across mine without a problem.
droopycr
DD-WRT Novice


Joined: 14 Apr 2016
Posts: 3

PostPosted: Fri Apr 15, 2016 17:52    Post subject: Re: Wireless link using WAP54G Reply with quote
jwh7 wrote:
droopycr wrote:
I want to make a wireless link with two WAP54G
There's also WDS. What build (number and type) are you using? And what settings did you use in your client/repeater testing? There are long and short methods to each, I recall, if you used the Linking Routers wiki.


Both are using v24-sp2 08/07/10micro - buils 14896

CLient bridge
G-only
Sensivity range 2000
Bridged
Advance Settings
Shared key
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2496
Location: Indy

PostPosted: Fri Apr 15, 2016 22:59    Post subject: Re: Wireless link using WAP54G Reply with quote
droopycr wrote:
Both are using v24-sp2 08/07/10micro - buils 14896
Don't use that build; read the Peacock announcement! Smile
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 20.1.2|FT2020.2: EA6900v1.1@1GHz, F7D8302@532|DD r42681: DIR-810L, WNDR4500v2 & 4000@533,
R6300v1, RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT 19.7.2: RT-ACRH13, R6220, WNDR3700v4
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum