Posted: Fri Feb 27, 2009 17:12 Post subject: Wireless connection not pass 2 Mbps Rate
i have this Wireless network
and i have 2 Linksys WRT54GL and the connection not pass 2 Mbps Rate.
The New WRT54GL(primary) is load whit DD-WRT v24-sp1 (07/26/0 std-special and before have DD-WRT v23 std and whit the same configuration the Wireless network have 11 Mbps Wirelees rate.
My question is i have to change other configuration to my Wireless connection up to 11 Mbps Rate ????
I downt know DD-WRT v24-sp1 std-special, all time work whit DD-WRT v23 std
I have this configuration (after changer to DD-WRT v24-sp1 (07/26/0 std-special) on my router
And whit this configuration whit DD-WRT v23 std i have 11mb Rate.
Joined: 13 Nov 2008 Posts: 5266 Location: CENTRAL Midnowhere
Posted: Fri Feb 27, 2009 17:51 Post subject:
Your signal strength is less than your noise. You need better antennas, and likely to reduce noise if you can. _________________ Warning: I'm "out of my element!"
http://www.youtube.com/watch?v=MjYJ7zZ9BRw&NR=1
but i work with the antenas 2 year and never have the problem.
i change the primary router, a Linksys WRT54G ver5 whit dd-wrt 23 standar to a new Linksys WRT54GL whit DD-WRT v24-sp1 (07/26/0 std-special
and when change the router and firmwere the wirelees network operate in 2mb :S, 1 day ago the wirelees networ work fine (i have this Network about 3 years)
Joined: 13 Nov 2008 Posts: 5266 Location: CENTRAL Midnowhere
Posted: Fri Feb 27, 2009 18:14 Post subject:
You signal is -86 and your noise is -77. If it used to work, then something has changed. Perhaps your antenna is not attached properly. Perhaps a microwave oven is on always now. This can't be fixed with dd-wrt, except to turn down your TX power from 150???..it is a hardware/environment issue.
What is between the two routers? How far apart are they? What are you using for antennas. _________________ Warning: I'm "out of my element!"
http://www.youtube.com/watch?v=MjYJ7zZ9BRw&NR=1
for discar the new Router is broken i conect the wirelees networ whit my other router (linksys ver5) and if the conection is ok the new linksys is broken