Netgear R7800 (Nighthawk X4S – AC2600) - status

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3 ... 177, 178, 179  Next
Author Message
Psyxroid
DD-WRT User


Joined: 24 Jan 2016
Posts: 130
Location: Midwest, US

PostPosted: Sat Feb 06, 2016 0:42    Post subject: Netgear R7800 (Nighthawk X4S – AC2600) - status Reply with quote
On paper, this router has better specs than Linksys EA8500.
https://wikidevi.com/wiki/Netgear_R7800
Is DD-WRT support anywhere in the near future?
There is a discrepancy between the link above and the wiki http://www.dd-wrt.com/wiki/index.php/Supported_Devices as far the radio chips. I'd imagine wikidevi information is more accurate.
If that is the case, are these QCA9984 radios supported or have a driver in the works?

_________________
Buffalo WZR‑600DHP (WZR-HP-AG300H)
Sponsor
GreyDoc
DD-WRT User


Joined: 04 Jun 2015
Posts: 392

PostPosted: Sat Feb 06, 2016 0:49    Post subject: Reply with quote
not sure if QCA9984 are supported in ath10k... more info at https://github.com/kvalo/ath10k-firmware/blob/master/README.md and the links within
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7010
Location: Winnipeg, Canada

PostPosted: Sat Feb 06, 2016 1:04    Post subject: Reply with quote
donate them one, other than that dont expect it soon..r7500v2 still isnt progressing either. only difference with this over ea8500 is its a "overclocked" ipq8064, chances are decent the 4 can reach the speeds of the 8065 fine, & the radios are vht160mhz supported, that is the only difference between qca9980 & 9984 is vht160, they are even pin compatible so theoretically u could rip off a qca9980 & stick in qca9984 & itll work..
_________________
LATEST FIRMWARE(S) || Qualcomm Atheros Wi-Fi Settings Guide || Qualcomm Atheros Repeating

[QUALCOMM] R7800 ---------------> DD-WRT v3.0-r40270M kongat
[QUALCOMM] DIR-862L ------------> DD-WRT v3.0-r40784 std
[QUALCOMM] WNDR4300 v1 ------> DD-WRT v3.0-r40784 std
[QUALCOMM] DIR-862L ------------> DD-WRT v3.0-r40784 std
▲ ACTIVE / INACTIVE ▼
[BROADCOM] DIR-860L A1 --------> DD-WRT v3.0-r40634 std

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

If you use DSLReports please enable hi-res bufferbloat.


Sigh.. why do i exist anyway..
GreyDoc
DD-WRT User


Joined: 04 Jun 2015
Posts: 392

PostPosted: Thu Mar 10, 2016 7:35    Post subject: Reply with quote
Netgear R7800 review: http://www.smallnetbuilder.com/wireless/wireless-reviews/32958-netgear-r7800-nighthawk-x4s-smart-wifi-gaming-router-reviewed
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6840
Location: Dresden, Germany

PostPosted: Tue Apr 12, 2016 17:15    Post subject: Reply with quote
tatsuya46 wrote:
donate them one, other than that dont expect it soon..r7500v2 still isnt progressing either. only difference with this over ea8500 is its a "overclocked" ipq8064, chances are decent the 4 can reach the speeds of the 8065 fine, & the radios are vht160mhz supported, that is the only difference between qca9980 & 9984 is vht160, they are even pin compatible so theoretically u could rip off a qca9980 & stick in qca9984 & itll work..


its not that easy. even if its a compatible pin layout, the chip is somewhat different. i need to have a working ath10k firmware for it and so far i havent found one

_________________
one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.

Yummee:
Linux DD-WRT 4.14.8 #42 SMP PREEMPT Thu Dec 21 18:11:16 CET 2017 armv7l DD-WRT
root@DD-WRT:/sys# nvram get DD_BOARD
Netgear R7800
Ah-Pin-Kor
DD-WRT User


Joined: 19 Sep 2015
Posts: 264

PostPosted: Mon Apr 25, 2016 15:21    Post subject: Reply with quote
One step closer?
http://svn.dd-wrt.com/changeset/29500

_________________

Netgear R7800 kongpro 19.07 20190711 || Netgear R7000 36070M kongac (Client Bridge=5GHz, AP=2.4GHz with bridged VAP)
Linksys WRT32X davidc502 OpenWrt || Linksys WRT1200ACv1 Gargoyle 1.11.x
Linksys WRT1900ACSv2 dd-wrt 39956
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4354
Location: Germany

PostPosted: Mon Apr 25, 2016 22:40    Post subject: Reply with quote
Ah-Pin-Kor wrote:
One step closer?
http://svn.dd-wrt.com/changeset/29500


No, this is just official support by ath10k, not much new, the problem is the missing radio firmware for the 9984.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
dissent
DD-WRT User


Joined: 04 May 2016
Posts: 126

PostPosted: Wed May 04, 2016 9:22    Post subject: Reply with quote
Maybe there is a chance to try the firmware even without wifi support?
The stock one is horrible Sad
dissent
DD-WRT User


Joined: 04 May 2016
Posts: 126

PostPosted: Wed May 11, 2016 8:45    Post subject: Reply with quote
There's ath10k support with firmware at last:)
https://github.com/kvalo/ath10k-firmware/tree/master/QCA9984/hw1.0
husky55
DD-WRT User


Joined: 19 Nov 2008
Posts: 242
Location: Madison, CT, US

PostPosted: Thu May 12, 2016 12:04    Post subject: R7500V2 Reply with quote
It would be real great if that the missing radio firmware for the QCA9984 is finally available. The newest firmware from Netgear for the R7500V2 is 1.0.2.4 and it's really slow and limited, i.e. no provision for repeater bridge. Since the R7500V2 is discontinued and replaced with the R7800 there are lots of R7500V2 out there due to the price reduction.
_________________
Netgear R7500V2(2) WDS, Asus RT-AC68R (2)
Psyxroid
DD-WRT User


Joined: 24 Jan 2016
Posts: 130
Location: Midwest, US

PostPosted: Fri May 13, 2016 3:36    Post subject: Reply with quote
I'd imagine this is the firmware finally http://svn.dd-wrt.com/changeset/29653
If this is anywhere close to testing, I'd definitely get my hands on one.

_________________
Buffalo WZR‑600DHP (WZR-HP-AG300H)
Ah-Pin-Kor
DD-WRT User


Joined: 19 Sep 2015
Posts: 264

PostPosted: Fri May 13, 2016 3:55    Post subject: Reply with quote
The radio's are up. Just need to wait patiently for Kong to finish his testing.
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=1030952#1030952

_________________

Netgear R7800 kongpro 19.07 20190711 || Netgear R7000 36070M kongac (Client Bridge=5GHz, AP=2.4GHz with bridged VAP)
Linksys WRT32X davidc502 OpenWrt || Linksys WRT1200ACv1 Gargoyle 1.11.x
Linksys WRT1900ACSv2 dd-wrt 39956
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4354
Location: Germany

PostPosted: Fri May 13, 2016 15:37    Post subject: Reply with quote
Uploaded a build for the R7800 now, see Readme for flashing instruction. I have not created a modified netgear image yet, that can be used to flash back to oem firmware. The only way to flash back to netgear firmware right now is via tftp. It does not require a serial setup, erasing linux will trigger fw recovery on next boot which allows to tftp a factory firmware.
_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
dissent
DD-WRT User


Joined: 04 May 2016
Posts: 126

PostPosted: Fri May 13, 2016 20:12    Post subject: Reply with quote
Flashed without a problem, seems WiFi works well. Thank you very much Smile
There is one problem though, can't get USB to work, enabled all services but the led on hdd doesn't even show a sign of connection. It does lit up when I push the reboot button)
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4354
Location: Germany

PostPosted: Fri May 13, 2016 20:26    Post subject: Reply with quote
Have not looked at USB yet.

Just did a little NAT benchmark LAN-WAN:

:~/Temp/Iperf/iperf-master/src> ./iperf -c 192.168.5.1 -t 30
------------------------------------------------------------
Client connecting to 192.168.5.1, TCP port 5001
TCP window size: 85.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.1.2 port 60414 connected with 192.168.5.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-30.0 sec 2.92 GBytes 835 Mbits/sec

835Mbps with one core maxed out, there is room for improvement:-) So finally we have a unit that can handle a gigabit line without any proprietary nat acceleration. When running my benchmarks the units just sits there at around 55° Celsius.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
Goto page 1, 2, 3 ... 177, 178, 179  Next Display posts from previous:    Page 1 of 179
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum