WRT1900ACS V2 - Firmware

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page Previous  1, 2, 3 ... 9, 10, 11, 12, 13  Next
Author Message
subnetangel
DD-WRT Novice


Joined: 04 Feb 2018
Posts: 1

PostPosted: Sun Feb 04, 2018 4:48    Post subject: NooB question Reply with quote
I see that build 33555 worked for you, did you reset or did you just upgraded keeping the settings?

inspired wrote:
thefunkygibbon wrote:
ok so i don't quite know whats going on but i'm running latest firmware as of today. quite often (like every day or two) my WRT1900ACS (v1) decides to go on the wonk.
DHCP seems to stop dishing out new leases, I cannot access the WebGUI of the box. I need to hardware reboot it.

I set up sys log server on my pc and had it send to it and from what I can tell (i'm not very experienced or knowledgeable about kernel debugging etc) it seemed to have died around 945 today and here are the logs for around there. (there were a lot of dropped traffic around it, but it seems pretty usual).

https://pastebin.com/RCbqNdLx

any ideas?


Go for build 33555. It solved all my issues on the WRT1900ACS v2. The latest you are referring to gave me the same issues you are having.
Sponsor
montgomery
DD-WRT Novice


Joined: 28 Jan 2015
Posts: 22

PostPosted: Sun Feb 04, 2018 15:06    Post subject: Reply with quote
Per Yngve Berg wrote:
Upgrading without reset may work in most cases. If you upgrade from a build that is not to old and there have not been any major changes in nvram variables between the versions, it usually works well.

A safe approach is to export the variables as text with "nvram show" and put them back in with "nvram set". This gives you also the possibilty to only restore selected variables.


Sweet! Thank you, very much. Smile

Now, I will go learn how to do that (export, etc).
If you No expectation, but if you happen to see this response, and have the time, would you be willing to point me in the correct direction for instructions (remember....stupid NOOB)?

One more question though...

I'm currently on 33986.
Given the context of your last comments, should I upgrade incrementally to each one of the firmware versions between that and the current one, and test things after each one to make sure, or just go up to the latest as of today?
jonahmt21
DD-WRT Novice


Joined: 03 Apr 2017
Posts: 14

PostPosted: Mon Feb 05, 2018 5:10    Post subject: Reply with quote
The most stable build for me is r33986

What build do you guys find most stable?

Thanks
stefan33
DD-WRT Novice


Joined: 05 Feb 2018
Posts: 32

PostPosted: Sun Feb 25, 2018 20:26    Post subject: Reply with quote
Hi, tomorrow my new WRT1900ACSV2 will arrive... (I hope)...
What is better to flash? Last 02-17-2018-r35034? Better this last build or other?

Thank you.
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5022
Location: Akershus, Norway

PostPosted: Sun Feb 25, 2018 20:32    Post subject: Reply with quote
Check the new build topics.

https://www.dd-wrt.com/phpBB2/viewtopic.php?t=313906
doniNZ74
DD-WRT User


Joined: 27 Apr 2016
Posts: 92
Location: Down down .... under

PostPosted: Mon Feb 26, 2018 21:33    Post subject: Reply with quote
stefan33 wrote:
Hi, tomorrow my new WRT1900ACSV2 will arrive... (I hope)...
What is better to flash? Last 02-17-2018-r35034? Better this last build or other?

Thank you.


I'm using v3.0-r34578. Seems to be one of the most stable builds for this router. Newer builds I have tried have problems with NTP, dhcp IP address handouts, and web GUI freezing. Also found 12-29-2017-r34311 to be very stable.

Edit: Apologies. Just read your post again and saw you running WRT1900acsv2. I have WRT1900acv2, not sure of the differences there.

_________________
Linksys WRT1900ACv2 - DD-WRT v3.0-r38240 std (01/08/19)
aairon
DD-WRT Guru


Joined: 18 Aug 2009
Posts: 587
Location: Antigua/Seattle

PostPosted: Tue Feb 27, 2018 20:32    Post subject: Reply with quote
There are new builds that can fix this issue but you'll need to wait for the server to get back up.

If you want to run lede you can look at the git hub for the latest version that addressed this issue.


The problem was found, it's a matter of time if Brain Slayer will post a new dd-wrt build, this issue doesn't effect the wrt3200acm.

_________________
WRT3200ACM
dexter33
DD-WRT Novice


Joined: 02 Mar 2018
Posts: 3

PostPosted: Fri Mar 02, 2018 8:08    Post subject: Turning OFF WIFI? Reply with quote
Hi, is there a way for turning off wifi?
I have WRT1900 ACS v2

Firmware: DD-WRT v3.0-r35034 std (02/17/1Cool

I set SERVICES:
SES / AOSS / EZ-SETUP / WPS Button
Turning off radio: Enable
Turn radio off at boot: Disable
aairon
DD-WRT Guru


Joined: 18 Aug 2009
Posts: 587
Location: Antigua/Seattle

PostPosted: Fri Mar 02, 2018 16:26    Post subject: Re: Turning OFF WIFI? Reply with quote
dexter33 wrote:
Hi, is there a way for turning off wifi?
I have WRT1900 ACS v2

Firmware: DD-WRT v3.0-r35034 std (02/17/1Cool

I set SERVICES:
SES / AOSS / EZ-SETUP / WPS Button
Turning off radio: Enable
Turn radio off at boot: Disable

Wireless settings=> Wireless Network Mode=>Disabled

_________________
WRT3200ACM
jonahmt21
DD-WRT Novice


Joined: 03 Apr 2017
Posts: 14

PostPosted: Fri Mar 02, 2018 17:27    Post subject: Reply with quote
doniNZ74 wrote:
stefan33 wrote:
Hi, tomorrow my new WRT1900ACSV2 will arrive... (I hope)...
What is better to flash? Last 02-17-2018-r35034? Better this last build or other?

Thank you.


I'm using v3.0-r34578. Seems to be one of the most stable builds for this router. Newer builds I have tried have problems with NTP, dhcp IP address handouts, and web GUI freezing. Also found 12-29-2017-r34311 to be very stable.

Edit: Apologies. Just read your post again and saw you running WRT1900acsv2. I have WRT1900acv2, not sure of the differences there.



whats your current uptime on this version? thanks
dexter33
DD-WRT Novice


Joined: 02 Mar 2018
Posts: 3

PostPosted: Sat Mar 03, 2018 0:34    Post subject: Re: Turning OFF WIFI? Reply with quote
aairon wrote:
dexter33 wrote:
Hi, is there a way for turning off wifi?
I have WRT1900 ACS v2

Firmware: DD-WRT v3.0-r35034 std (02/17/1Cool

I set SERVICES:
SES / AOSS / EZ-SETUP / WPS Button
Turning off radio: Enable
Turn radio off at boot: Disable

Wireless settings=> Wireless Network Mode=>Disabled


It doesn't work, my wifi still online, and can connect...
aairon
DD-WRT Guru


Joined: 18 Aug 2009
Posts: 587
Location: Antigua/Seattle

PostPosted: Sat Mar 03, 2018 0:49    Post subject: Re: Turning OFF WIFI? Reply with quote
dexter33 wrote:
aairon wrote:
dexter33 wrote:
Hi, is there a way for turning off wifi?
I have WRT1900 ACS v2

Firmware: DD-WRT v3.0-r35034 std (02/17/1Cool

I set SERVICES:
SES / AOSS / EZ-SETUP / WPS Button
Turning off radio: Enable
Turn radio off at boot: Disable

Wireless settings=> Wireless Network Mode=>Disabled


It doesn't work, my wifi still online, and can connect...

Then your build is completely corrupt and still somehow loading a GUI screen? or your router is broken.

I've been around these things since the very first router of any kind was invented and I never had one that refused to turn off wifi after disabling it and applying the setting!

All I can say is best of luck to you.

P.S. You do know that you have click apply to apply the settings right? Clicking on save will do nothing unless you apply the settings!

_________________
WRT3200ACM
dexter33
DD-WRT Novice


Joined: 02 Mar 2018
Posts: 3

PostPosted: Sat Mar 03, 2018 4:48    Post subject: Re: Turning OFF WIFI? Reply with quote
aairon wrote:
dexter33 wrote:
aairon wrote:
dexter33 wrote:
Hi, is there a way for turning off wifi?
I have WRT1900 ACS v2

Firmware: DD-WRT v3.0-r35034 std (02/17/1Cool

I set SERVICES:
SES / AOSS / EZ-SETUP / WPS Button
Turning off radio: Enable
Turn radio off at boot: Disable

Wireless settings=> Wireless Network Mode=>Disabled


It doesn't work, my wifi still online, and can connect...

Then your build is completely corrupt and still somehow loading a GUI screen? or your router is broken.

I've been around these things since the very first router of any kind was invented and I never had one that refused to turn off wifi after disabling it and applying the setting!

All I can say is best of luck to you.

P.S. You do know that you have click apply to apply the settings right? Clicking on save will do nothing unless you apply the settings!


Hi, thanks for reply, what do you mean by loading GUI screen? How can I verifiy what's wrong, sorry, this is my first dd-wrt router, previously I had on this router Open-wrt, reflashed back to dd-wrt, maybe i've done something wrong.
adriansuri
DD-WRT Novice


Joined: 01 Oct 2017
Posts: 39

PostPosted: Sun Mar 18, 2018 22:39    Post subject: re mine is version 2 Reply with quote
Yes there is a v2 of this model and here's the link

https://www.dd-wrt.com/site/support/other-downloads?path=betas%2F2018%2F03-05-2018-r35244%2Flinksys-wrt1900acsv2%2F

regards

Adrian
stefan33
DD-WRT Novice


Joined: 05 Feb 2018
Posts: 32

PostPosted: Mon Mar 19, 2018 11:14    Post subject: Reply with quote
Excuse me I hawe the AC1900ACSV2 working fine but now I discover that if I connect with wifi (working everithing fine wired) I can't get the normal my DCHP adress: 192.168.4.100 to 150) i get strange ip and I can't get internet acess... any help? Many thanks...

Now I found this: Is it correct because I did't add it???

VLAN Tagging
Tagging

Bridging
Create Bridge
Name STP IGMP Snooping Prio MTU Root MAC

br0

32768

1500

xx:xx:xx:xx:xx:xx

Assign to Bridge

Current Bridging Table
Bridge Name STP enabled Interface
br0 no eth1 ath0
Goto page Previous  1, 2, 3 ... 9, 10, 11, 12, 13  Next Display posts from previous:    Page 10 of 13
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum